Allowable Stress in Brittle Material under Tensile Loading Solution

STEP 0: Pre-Calculation Summary
Formula Used
Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety
σal = Sut/fs
This formula uses 3 Variables
Variables Used
Allowable Stress for Static Load - (Measured in Pascal) - Allowable Stress for Static Load is also known as working load and is the ratio of tensile strength and factor of safety.
Ultimate Tensile Strength - (Measured in Pascal) - Ultimate Tensile Strength (UTS) is the maximum stress that a material can withstand while being stretched or pulled.
Factor of Safety - Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
STEP 1: Convert Input(s) to Base Unit
Ultimate Tensile Strength: 122 Newton per Square Millimeter --> 122000000 Pascal (Check conversion here)
Factor of Safety: 2 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
σal = Sut/fs --> 122000000/2
Evaluating ... ...
σal = 61000000
STEP 3: Convert Result to Output's Unit
61000000 Pascal -->61 Newton per Square Millimeter (Check conversion here)
FINAL ANSWER
61 Newton per Square Millimeter <-- Allowable Stress for Static Load
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has created this Calculator and 600+ more calculators!
Verified by Chilvera Bhanu Teja
Institute of Aeronautical Engineering (IARE), Hyderabad
Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

4 Maximum Principal Stress Theory Calculators

Allowable Stress in Brittle Material under Compressive Loading
Go Allowable Stress for Static Load = Ultimate Compressive Stress/Factor of Safety
Allowable Stress in Ductile Material under Compressive Loading
Go Allowable Stress for Static Load = Compressive Yield Strength/Factor of Safety
Allowable Stress in Brittle Material under Tensile Loading
Go Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety
Allowable Stress in Ductile Material under Tensile Loading
Go Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety

Allowable Stress in Brittle Material under Tensile Loading Formula

Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety
σal = Sut/fs

What is factor of safety?

There are always approximations in engineering calculations. Hence, the allowed stress is kept less than failure stress, and the ratio of failure stress to allowed stress is called factor of safety.

How to Calculate Allowable Stress in Brittle Material under Tensile Loading?

Allowable Stress in Brittle Material under Tensile Loading calculator uses Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety to calculate the Allowable Stress for Static Load, Allowable stress in brittle material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one. Allowable Stress for Static Load is denoted by σal symbol.

How to calculate Allowable Stress in Brittle Material under Tensile Loading using this online calculator? To use this online calculator for Allowable Stress in Brittle Material under Tensile Loading, enter Ultimate Tensile Strength (Sut) & Factor of Safety (fs) and hit the calculate button. Here is how the Allowable Stress in Brittle Material under Tensile Loading calculation can be explained with given input values -> 6.1E-5 = 122000000/2.

FAQ

What is Allowable Stress in Brittle Material under Tensile Loading?
Allowable stress in brittle material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one and is represented as σal = Sut/fs or Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety. Ultimate Tensile Strength (UTS) is the maximum stress that a material can withstand while being stretched or pulled & Factor of Safety expresses how much stronger a system is than it needs to be for an intended load.
How to calculate Allowable Stress in Brittle Material under Tensile Loading?
Allowable stress in brittle material under tensile loading formula is defined as the ratio of ultimate compressive stress to the factor of safety. It is the material failure stress (a property of the material) divided by a factor of safety greater than one is calculated using Allowable Stress for Static Load = Ultimate Tensile Strength/Factor of Safety. To calculate Allowable Stress in Brittle Material under Tensile Loading, you need Ultimate Tensile Strength (Sut) & Factor of Safety (fs). With our tool, you need to enter the respective value for Ultimate Tensile Strength & Factor of Safety and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Allowable Stress for Static Load?
In this formula, Allowable Stress for Static Load uses Ultimate Tensile Strength & Factor of Safety. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Allowable Stress for Static Load = Tensile Yield Strength/Factor of Safety
  • Allowable Stress for Static Load = Compressive Yield Strength/Factor of Safety
  • Allowable Stress for Static Load = Ultimate Compressive Stress/Factor of Safety
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!