Ambient Temperature Solution

STEP 0: Pre-Calculation Summary
Formula Used
Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)
θo = θB-He/(Qmax*ρe*ce)
This formula uses 6 Variables
Variables Used
Ambient Air Temperature - (Measured in Kelvin) - Ambient Air Temperature is the temperature where the ramming process starts.
Boiling Point of Electrolyte - (Measured in Kelvin) - Boiling Point of electrolyte is the temperature at which a liquid starts to boil and transforms to vapor.
Heat Absorption of Electrolyte - (Measured in Watt) - Heat Absorption of Electrolyte is the Heat absorbed by the electrolyte.
Maximum Volume Flow Rate - (Measured in Cubic Meter per Second) - Maximum Volume Flow Rate refers to the quantity of fluid (liquid or gas) that passes through a given surface per unit of time.
Density of Electrolyte - (Measured in Kilogram per Cubic Meter) - The Density of Electrolyte shows the denseness of that electrolyte in a specific given area. This is taken as mass per unit volume of a given object.
Specific Heat Capacity of Electrolyte - (Measured in Joule per Kilogram per K) - Specific Heat Capacity of electrolyte is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
STEP 1: Convert Input(s) to Base Unit
Boiling Point of Electrolyte: 368.15 Kelvin --> 368.15 Kelvin No Conversion Required
Heat Absorption of Electrolyte: 12 Kilowatt --> 12000 Watt (Check conversion here)
Maximum Volume Flow Rate: 47991 Cubic Millimeter per Second --> 4.7991E-05 Cubic Meter per Second (Check conversion here)
Density of Electrolyte: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Specific Heat Capacity of Electrolyte: 4.18 Kilojoule per Kilogram per K --> 4180 Joule per Kilogram per K (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
θo = θB-He/(Qmaxe*ce) --> 368.15-12000/(4.7991E-05*997*4180)
Evaluating ... ...
θo = 308.150171857508
STEP 3: Convert Result to Output's Unit
308.150171857508 Kelvin --> No Conversion Required
FINAL ANSWER
308.150171857508 308.1502 Kelvin <-- Ambient Air Temperature
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has verified this Calculator and 200+ more calculators!

6 Heat absorbed by the electrolyte Calculators

Ambient Temperature
Go Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)
Flow Rate of Electrolyte from Heat Absorbed Electrolyte
Go Volume Flow Rate = Heat Absorption of Electrolyte/(Density of Electrolyte*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))
Density of Electrolyte from Heat Absorbed Electrolyte
Go Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))
Specific Heat of Electrolyte
Go Specific Heat Capacity of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Density of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))
Heat Absorbed by Electrolyte
Go Heat Absorption of Electrolyte = Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature)
Boiling Point of Electrolyte
Go Boiling Point of Electrolyte = Ambient Air Temperature+Heat Absorption of Electrolyte/(Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)

Ambient Temperature Formula

Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)
θo = θB-He/(Qmax*ρe*ce)

What is Faraday's I law of electrolysis ?

The first law of Faraday’s electrolysis states that the chemical change produced during electrolysis is proportional to the current passed and the electrochemical equivalence of the anode material.

How to Calculate Ambient Temperature?

Ambient Temperature calculator uses Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte) to calculate the Ambient Air Temperature, The Ambient temperature formula is defined as the ambient temperature where there ECM is being performed. Ambient Air Temperature is denoted by θo symbol.

How to calculate Ambient Temperature using this online calculator? To use this online calculator for Ambient Temperature, enter Boiling Point of Electrolyte B), Heat Absorption of Electrolyte (He), Maximum Volume Flow Rate (Qmax), Density of Electrolyte e) & Specific Heat Capacity of Electrolyte (ce) and hit the calculate button. Here is how the Ambient Temperature calculation can be explained with given input values -> 21.2281 = 368.15-12000/(4.7991E-05*997*4180).

FAQ

What is Ambient Temperature?
The Ambient temperature formula is defined as the ambient temperature where there ECM is being performed and is represented as θo = θB-He/(Qmaxe*ce) or Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte). Boiling Point of electrolyte is the temperature at which a liquid starts to boil and transforms to vapor, Heat Absorption of Electrolyte is the Heat absorbed by the electrolyte, Maximum Volume Flow Rate refers to the quantity of fluid (liquid or gas) that passes through a given surface per unit of time, The Density of Electrolyte shows the denseness of that electrolyte in a specific given area. This is taken as mass per unit volume of a given object & Specific Heat Capacity of electrolyte is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
How to calculate Ambient Temperature?
The Ambient temperature formula is defined as the ambient temperature where there ECM is being performed is calculated using Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte). To calculate Ambient Temperature, you need Boiling Point of Electrolyte B), Heat Absorption of Electrolyte (He), Maximum Volume Flow Rate (Qmax), Density of Electrolyte e) & Specific Heat Capacity of Electrolyte (ce). With our tool, you need to enter the respective value for Boiling Point of Electrolyte, Heat Absorption of Electrolyte, Maximum Volume Flow Rate, Density of Electrolyte & Specific Heat Capacity of Electrolyte and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!