Angle between Diagonal and Breadth of Rectangle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle)
db = atan(l/b)
This formula uses 2 Functions, 3 Variables
Functions Used
tan - The tangent of an angle is a trigonometric ratio of the length of the side opposite an angle to the length of the side adjacent to an angle in a right triangle., tan(Angle)
atan - Inverse tan is used to calculate the angle by applying the tangent ratio of the angle, which is the opposite side divided by the adjacent side of the right triangle., atan(Number)
Variables Used
Angle between Diagonal and Breadth of Rectangle - (Measured in Radian) - Angle between Diagonal and Breadth of Rectangle is the measure of wideness of the angle made by any diagonal with the breadth of the Rectangle.
Length of Rectangle - (Measured in Meter) - Length of Rectangle is any one of the pair of parallel sides which are longer than the remaining pair of parallel sides.
Breadth of Rectangle - (Measured in Meter) - Breadth of Rectangle is any one of the pair of parallel sides which are shorter than the remaining pair of parallel sides.
STEP 1: Convert Input(s) to Base Unit
Length of Rectangle: 8 Meter --> 8 Meter No Conversion Required
Breadth of Rectangle: 6 Meter --> 6 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
db = atan(l/b) --> atan(8/6)
Evaluating ... ...
db = 0.927295218001612
STEP 3: Convert Result to Output's Unit
0.927295218001612 Radian -->53.130102354166 Degree (Check conversion here)
FINAL ANSWER
53.130102354166 53.1301 Degree <-- Angle between Diagonal and Breadth of Rectangle
(Calculation completed in 00.004 seconds)

Credits

Created by Shivakshi Bhardwaj
Cluster Innovation Centre (CIC), Delhi, 110007
Shivakshi Bhardwaj has created this Calculator and 100+ more calculators!
Verified by Nayana Phulphagar
Institute of Chartered and Financial Analysts of India National college (ICFAI National College), HUBLI
Nayana Phulphagar has verified this Calculator and 1400+ more calculators!

14 Angle between Diagonal and Breadth Calculators

Angle between Diagonal and Breadth of Rectangle given Perimeter and Breadth
Go Angle between Diagonal and Breadth of Rectangle = atan(((Perimeter of Rectangle/2)-Breadth of Rectangle)/Breadth of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Perimeter and Length
Go Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/((Perimeter of Rectangle/2)-Length of Rectangle))
Angle between Diagonal and Breadth of Rectangle given Area and Breadth
Go Angle between Diagonal and Breadth of Rectangle = atan((Area of Rectangle/Breadth of Rectangle)/Breadth of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Area and Length
Go Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/(Area of Rectangle/Length of Rectangle))
Angle between Diagonal and Breadth of Rectangle given Diameter of Circumcircle and Breadth
Go Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/Diameter of Circumcircle of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Diameter of Circumcircle and Length
Go Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/Diameter of Circumcircle of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Breadth and Circumradius
Go Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/(2*Circumradius of Rectangle))
Angle between Diagonal and Breadth of Rectangle given Length and Circumradius
Go Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/(2*Circumradius of Rectangle))
Angle between Diagonal and Breadth of Rectangle given Diagonal and Breadth
Go Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/Diagonal of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Diagonal and Length
Go Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/Diagonal of Rectangle)
Angle between Diagonal and Breadth of Rectangle
Go Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle)
Angle between Diagonal and Breadth of Rectangle given Angle between Diagonal and Length
Go Angle between Diagonal and Breadth of Rectangle = pi/2-Angle between Diagonal and Length of Rectangle
Angle between Diagonal and Breadth of Rectangle given Acute Angle between Diagonals
Go Angle between Diagonal and Breadth of Rectangle = (pi-Acute Angle between Diagonals of Rectangle)/2
Angle between Diagonal and Breadth of Rectangle given Obtuse Angle between Diagonals
Go Angle between Diagonal and Breadth of Rectangle = Obtuse Angle between Diagonals of Rectangle/2

4 Angles of Rectangle Calculators

Angle between Diagonal and Breadth of Rectangle
Go Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle)
Angle between Diagonal and Length of Rectangle
Go Angle between Diagonal and Length of Rectangle = atan(Breadth of Rectangle/Length of Rectangle)
Obtuse Angle between Diagonals of Rectangle
Go Obtuse Angle between Diagonals of Rectangle = 2*atan(Length of Rectangle/Breadth of Rectangle)
Acute Angle between Diagonals of Rectangle
Go Acute Angle between Diagonals of Rectangle = 2*atan(Breadth of Rectangle/Length of Rectangle)

Angle between Diagonal and Breadth of Rectangle Formula

Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle)
db = atan(l/b)

What is a Rectangle?

A Rectangle is a two dimensional geometric shape having four sides and four corners. The four sides are in two pairs, in which each pair of lines are equal in length and parallel to each other. And adjacent sides are perpendicular to each other. In general a 2D shape with four boundary edges are called quadrilaterals. So a rectangle is a quadrilateral in which each corner is right angle.

What is Angle?

In geometry, an angle can be defined as the figure formed by two rays starting from a common endpoint. As a measure, angle is the degree of wideness of the two rays forming the angle. Degree and Radian are the most common units of angle and they are related by pi radian = 180 degrees, where the two rays together form a straight line.

How to Calculate Angle between Diagonal and Breadth of Rectangle?

Angle between Diagonal and Breadth of Rectangle calculator uses Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle) to calculate the Angle between Diagonal and Breadth of Rectangle, The Angle between Diagonal and Breadth of Rectangle formula is defined as the measure of wideness of the Angle made by any Diagonal with the Breadth of the Rectangle. Angle between Diagonal and Breadth of Rectangle is denoted by db symbol.

How to calculate Angle between Diagonal and Breadth of Rectangle using this online calculator? To use this online calculator for Angle between Diagonal and Breadth of Rectangle, enter Length of Rectangle (l) & Breadth of Rectangle (b) and hit the calculate button. Here is how the Angle between Diagonal and Breadth of Rectangle calculation can be explained with given input values -> 3044.131 = atan(8/6).

FAQ

What is Angle between Diagonal and Breadth of Rectangle?
The Angle between Diagonal and Breadth of Rectangle formula is defined as the measure of wideness of the Angle made by any Diagonal with the Breadth of the Rectangle and is represented as db = atan(l/b) or Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle). Length of Rectangle is any one of the pair of parallel sides which are longer than the remaining pair of parallel sides & Breadth of Rectangle is any one of the pair of parallel sides which are shorter than the remaining pair of parallel sides.
How to calculate Angle between Diagonal and Breadth of Rectangle?
The Angle between Diagonal and Breadth of Rectangle formula is defined as the measure of wideness of the Angle made by any Diagonal with the Breadth of the Rectangle is calculated using Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/Breadth of Rectangle). To calculate Angle between Diagonal and Breadth of Rectangle, you need Length of Rectangle (l) & Breadth of Rectangle (b). With our tool, you need to enter the respective value for Length of Rectangle & Breadth of Rectangle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Angle between Diagonal and Breadth of Rectangle?
In this formula, Angle between Diagonal and Breadth of Rectangle uses Length of Rectangle & Breadth of Rectangle. We can use 13 other way(s) to calculate the same, which is/are as follows -
  • Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/Diagonal of Rectangle)
  • Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/Diagonal of Rectangle)
  • Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/(2*Circumradius of Rectangle))
  • Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/(2*Circumradius of Rectangle))
  • Angle between Diagonal and Breadth of Rectangle = (pi-Acute Angle between Diagonals of Rectangle)/2
  • Angle between Diagonal and Breadth of Rectangle = Obtuse Angle between Diagonals of Rectangle/2
  • Angle between Diagonal and Breadth of Rectangle = pi/2-Angle between Diagonal and Length of Rectangle
  • Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/(Area of Rectangle/Length of Rectangle))
  • Angle between Diagonal and Breadth of Rectangle = atan((Area of Rectangle/Breadth of Rectangle)/Breadth of Rectangle)
  • Angle between Diagonal and Breadth of Rectangle = atan(Length of Rectangle/((Perimeter of Rectangle/2)-Length of Rectangle))
  • Angle between Diagonal and Breadth of Rectangle = atan(((Perimeter of Rectangle/2)-Breadth of Rectangle)/Breadth of Rectangle)
  • Angle between Diagonal and Breadth of Rectangle = asin(Length of Rectangle/Diameter of Circumcircle of Rectangle)
  • Angle between Diagonal and Breadth of Rectangle = acos(Breadth of Rectangle/Diameter of Circumcircle of Rectangle)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!