Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor))
Φ = acos(sqrt((2.914)*K/V))
This formula uses 3 Functions, 3 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
acos - The inverse cosine function, is the inverse function of the cosine function. It is the function that takes a ratio as an input and returns the angle whose cosine is equal to that ratio., acos(Number)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Constant Underground AC - Constant Underground AC is defined as the constant of line of a Overhead supply system.
Volume Of Conductor - (Measured in Cubic Meter) - Volume Of Conductor the 3-dimensional space enclosed by a conductor material.
STEP 1: Convert Input(s) to Base Unit
Constant Underground AC: 0.87 --> No Conversion Required
Volume Of Conductor: 60 Cubic Meter --> 60 Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Φ = acos(sqrt((2.914)*K/V)) --> acos(sqrt((2.914)*0.87/60))
Evaluating ... ...
Φ = 1.36376519007418
STEP 3: Convert Result to Output's Unit
1.36376519007418 Radian -->78.1379896381217 Degree (Check conversion here)
FINAL ANSWER
78.1379896381217 78.13799 Degree <-- Phase Difference
(Calculation completed in 00.020 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has verified this Calculator and 100+ more calculators!

17 Wire Parameters Calculators

Volume of Conductor Material using Resistance (2 Phase 3 Wire US)
Go Volume Of Conductor = ((2+sqrt(2))^2*(Power Transmitted^2)*Resistance Underground AC*Area of Underground AC Wire*Length of Underground AC Wire)/(Line Losses*(Maximum Voltage Underground AC^2)*(cos(Phase Difference))^2)
Angle of Pf using Line Losses (2-Phase 3-Wire US)
Go Phase Difference = acos((2+(sqrt(2)*Power Transmitted/Maximum Voltage Underground AC))*(sqrt(Resistivity*Length of Underground AC Wire/Line Losses*Area of Underground AC Wire)))
Length using Volume of Conductor Material (2 Phase 3 Wire US)
Go Length of Underground AC Wire = sqrt(Volume Of Conductor*Line Losses*(cos(Phase Difference)*Maximum Voltage Underground AC)^2/(Resistivity*((2+sqrt(2))*Power Transmitted^2)))
Volume of Conductor Material (2 Phase 3 Wire US)
Go Volume Of Conductor = ((2+sqrt(2))^2)*(Power Transmitted^2)*Resistivity*(Length of Underground AC Wire^2)/(Line Losses*(Maximum Voltage Underground AC^2)*(cos(Phase Difference)^2))
Area of X-Section using Line Losses (2-Phase 3-Wire US)
Go Area of Underground AC Wire = (2+sqrt(2))*Resistivity*Length of Underground AC Wire*(Power Transmitted)^2/(Line Losses*(Maximum Voltage Underground AC*cos(Phase Difference))^2)
Length using Line Losses (2-Phase 3-Wire US)
Go Length of Underground AC Wire = Line Losses*Area of Underground AC Wire*(Maximum Voltage Underground AC*cos(Phase Difference))^2/((2+sqrt(2))*(Power Transmitted^2)*Resistivity)
Line Losses using Volume of Conductor Material (2 Phase 3 Wire US)
Go Line Losses = ((2+sqrt(2))*Power Transmitted)^2*Resistivity*(Length of Underground AC Wire)^2/((Maximum Voltage Underground AC*cos(Phase Difference))^2*Volume Of Conductor)
Volume of Conductor Material using Area and Length(2 Phase 3 Wire US)
Go Volume Of Conductor = (2*Area of Underground AC Wire*Length of Underground AC Wire)+(sqrt(2)*Area of Underground AC Wire*Length of Underground AC Wire)
Volume of Conductor Material using Load Current (2 Phase 3 Wire US)
Go Volume Of Conductor = (2+sqrt(2))^2*Resistivity*(Length of Underground AC Wire^2)*(Current Underground AC^2)/Line Losses
Angle using Current in Neutral Wire (2-Phase 3-Wire US)
Go Phase Difference = acos(sqrt(2)*Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC))
Length using Resistance of Natural Wire (2-Phase 3-Wire US)
Go Length of Underground AC Wire = (Resistance Underground AC*sqrt(2)*Area of Underground AC Wire)/(Resistivity)
Area using Resistance of Natural Wire (2-Phase 3-Wire US)
Go Area of Underground AC Wire = Resistivity*Length of Underground AC Wire/(sqrt(2)*Resistance Underground AC)
Angle using Current in Each Outer (2-Phase 3-Wire US)
Go Phase Difference = acos(Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC))
Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US)
Go Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor))
Area of X Section using Volume of Conductor Material (2 Phase 3 Wire US)
Go Area of Underground AC Wire = Volume Of Conductor/((2+sqrt(2))*Length of Underground AC Wire)
Constant using Volume of Conductor Material (2 Phase 3 Wire US)
Go Constant Underground AC = Volume Of Conductor*((cos(Phase Difference))^2)/(2.914)
Volume of Conductor Material using Constant(2 Phase 3 Wire US)
Go Volume Of Conductor = 2.194*Constant Underground AC/(cos(Phase Difference)^2)

Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US) Formula

Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor))
Φ = acos(sqrt((2.914)*K/V))

How do you calculate power factor?

Power factor (PF) is the ratio of working power, measured in kilowatts (kW), to apparent power, measured in kilovolt amperes (kVA). Apparent power, also known as demand, is the measure of the amount of power used to run machinery and equipment during a certain period. It is found by multiplying (kVA = V x A).

How to Calculate Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US)?

Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US) calculator uses Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor)) to calculate the Phase Difference, The Angle of PF using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the phase angle between reactive and active power. Phase Difference is denoted by Φ symbol.

How to calculate Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US) using this online calculator? To use this online calculator for Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US), enter Constant Underground AC (K) & Volume Of Conductor (V) and hit the calculate button. Here is how the Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US) calculation can be explained with given input values -> 4476.977 = acos(sqrt((2.914)*0.87/60)).

FAQ

What is Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US)?
The Angle of PF using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the phase angle between reactive and active power and is represented as Φ = acos(sqrt((2.914)*K/V)) or Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor)). Constant Underground AC is defined as the constant of line of a Overhead supply system & Volume Of Conductor the 3-dimensional space enclosed by a conductor material.
How to calculate Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US)?
The Angle of PF using Volume of Conductor Material (2 phase 3 wire US) formula is defined as the phase angle between reactive and active power is calculated using Phase Difference = acos(sqrt((2.914)*Constant Underground AC/Volume Of Conductor)). To calculate Angle of PF using Volume of Conductor Material (2 Phase 3 Wire US), you need Constant Underground AC (K) & Volume Of Conductor (V). With our tool, you need to enter the respective value for Constant Underground AC & Volume Of Conductor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Phase Difference?
In this formula, Phase Difference uses Constant Underground AC & Volume Of Conductor. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Phase Difference = acos((2+(sqrt(2)*Power Transmitted/Maximum Voltage Underground AC))*(sqrt(Resistivity*Length of Underground AC Wire/Line Losses*Area of Underground AC Wire)))
  • Phase Difference = acos(Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC))
  • Phase Difference = acos(sqrt(2)*Power Transmitted/(Current Underground AC*Maximum Voltage Underground AC))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!