Basic Load Effect given Ultimate Strength for Applied Wind Loads Solution

STEP 0: Pre-Calculation Summary
Formula Used
Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
DL = (U-(1.3*W))/(0.9)
This formula uses 3 Variables
Variables Used
Dead Load - (Measured in Kilonewton per Square Meter) - Dead Load consisting of basic load plus volume change due to (shrinkage,temperature).
Ultimate Strength - (Measured in Kilonewton per Square Meter) - ultimate strengths is the capacities to resist design loads and their related internal moments and forces.
Wind Load - (Measured in Kilonewton per Square Meter) - Wind Load is the load, placed on the exterior of a structure by wind.
STEP 1: Convert Input(s) to Base Unit
Ultimate Strength: 20 Kilonewton per Square Meter --> 20 Kilonewton per Square Meter No Conversion Required
Wind Load: 7 Kilonewton per Square Meter --> 7 Kilonewton per Square Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
DL = (U-(1.3*W))/(0.9) --> (20-(1.3*7))/(0.9)
Evaluating ... ...
DL = 12.1111111111111
STEP 3: Convert Result to Output's Unit
12111.1111111111 Pascal -->12.1111111111111 Kilonewton per Square Meter (Check conversion here)
FINAL ANSWER
12.1111111111111 12.11111 Kilonewton per Square Meter <-- Dead Load
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has verified this Calculator and 100+ more calculators!

6 Partial Safety Factors for Loads Calculators

Basic Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads
Go Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)
Live Load Effect given Ultimate Strength for Unapplied Wind and Earthquake Loads
Go Live Load = (Ultimate Strength-(1.4*Dead Load))/(1.7)
Basic Load Effect given Ultimate Strength for Applied Wind Loads
Go Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
Wind Load Effect given Ultimate Strength for Applied Wind Loads
Go Wind Load = (Ultimate Strength-(0.9*Dead Load))/(1.3)
Ultimate Strength when Wind and Earthquake Loads are not Applied
Go Ultimate Strength = (1.4*Dead Load)+(1.7*Live Load)
Ultimate Strength when Wind Loads are Applied
Go Ultimate Strength = (0.9*Dead Load)+(1.3*Wind Load)

Basic Load Effect given Ultimate Strength for Applied Wind Loads Formula

Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9)
DL = (U-(1.3*W))/(0.9)

What is Basic Load Effect or Dead Load?

Dead load is defined as a constant load in a structure (such as a bridge, building, or machine) that is due to the weight of the members, the supported structure, and permanent attachments or accessories.

How to Calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads?

Basic Load Effect given Ultimate Strength for Applied Wind Loads calculator uses Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9) to calculate the Dead Load, The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure . Dead Load is denoted by DL symbol.

How to calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads using this online calculator? To use this online calculator for Basic Load Effect given Ultimate Strength for Applied Wind Loads, enter Ultimate Strength (U) & Wind Load (W) and hit the calculate button. Here is how the Basic Load Effect given Ultimate Strength for Applied Wind Loads calculation can be explained with given input values -> 0.012111 = (20000-(1.3*7000))/(0.9).

FAQ

What is Basic Load Effect given Ultimate Strength for Applied Wind Loads?
The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure and is represented as DL = (U-(1.3*W))/(0.9) or Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9). ultimate strengths is the capacities to resist design loads and their related internal moments and forces & Wind Load is the load, placed on the exterior of a structure by wind.
How to calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads?
The Basic Load Effect given Ultimate Strength for Applied Wind Loads formula is defined as a constant load in a structure is calculated using Dead Load = (Ultimate Strength-(1.3*Wind Load))/(0.9). To calculate Basic Load Effect given Ultimate Strength for Applied Wind Loads, you need Ultimate Strength (U) & Wind Load (W). With our tool, you need to enter the respective value for Ultimate Strength & Wind Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Dead Load?
In this formula, Dead Load uses Ultimate Strength & Wind Load. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Dead Load = (Ultimate Strength-(1.7*Live Load))/(1.4)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!