Bending Stress using Eccentric Load and Eccentricity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2))
ฯƒb = (6*P*eload)/(h*(b^2))
This formula uses 5 Variables
Variables Used
Bending Stress in Column - (Measured in Pascal) - Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.
Eccentric load on column - (Measured in Newton) - Eccentric load on column is the load that causes direct stress as well as bending stress.
Eccentricity of Loading - (Measured in Meter) - Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.
Depth of Column - (Measured in Meter) - Depth of Column is the distance from the top or surface to the bottom of something.
Width of column - (Measured in Meter) - Width of column is describing how wide the column is.
STEP 1: Convert Input(s) to Base Unit
Eccentric load on column: 7 Kilonewton --> 7000 Newton (Check conversion here)
Eccentricity of Loading: 25 Millimeter --> 0.025 Meter (Check conversion here)
Depth of Column: 3000 Millimeter --> 3 Meter (Check conversion here)
Width of column: 600 Millimeter --> 0.6 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ฯƒb = (6*P*eload)/(h*(b^2)) --> (6*7000*0.025)/(3*(0.6^2))
Evaluating ... ...
ฯƒb = 972.222222222222
STEP 3: Convert Result to Output's Unit
972.222222222222 Pascal -->0.000972222222222222 Megapascal (Check conversion here)
FINAL ANSWER
0.000972222222222222 โ‰ˆ 0.000972 Megapascal <-- Bending Stress in Column
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Dipto Mandal
Indian Institute of Information Technology (IIIT), Guwahati
Dipto Mandal has verified this Calculator and 400+ more calculators!

22 Rectangular Section Is Subjected To Eccentric Load Calculators

Maximum stress when subjected to eccentric axial load
Go Maximum Stress on Column Section = (Eccentric load on column/Column Cross Sectional Area)+((Eccentric load on column*Eccentricity of Loading*Distance of Outer Fibre from Neutral Axis)/Moment of Inertia about y-y axis)
Width of Column using Bending Stress and Eccentric load
Go Width of column = sqrt((6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*Bending Stress in Column))
Maximum Stress given Eccentric Load and Eccentricity
Go Maximum Stress on Column Section = (Eccentric load on column*(1+(6*Eccentricity of Loading/Width of column)))/(Column Cross Sectional Area)
Eccentric Load using Maximum Stress
Go Eccentric load on column = (Maximum Stress on Column Section*Column Cross Sectional Area)/(1+(6*Eccentricity of Loading/Width of column))
Eccentricity using Maximum Stress
Go Eccentricity of Loading = ((Maximum Stress on Column Section*Column Cross Sectional Area/Eccentric load on column)-1)*(Width of column/6)
Minimum Stress using Eccentric Load and Eccentricity
Go Minimum Stress Value = (Eccentric load on column*(1-(6*Eccentricity of Loading/Width of column)))/(Column Cross Sectional Area)
Eccentric Load using Minimum Stress
Go Eccentric load on column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of column))
Eccentricity using Minimum Stress
Go Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric load on column))*(Width of column/6)
Eccentric Load using Bending Stress
Go Eccentric load on column = (Bending Stress in Column*(Depth of Column*(Width of column^2)))/(6*Eccentricity of Loading)
Eccentricity using Bending Stress
Go Eccentricity of Loading = (Bending Stress in Column*(Depth of Column*(Width of column^2)))/(6*Eccentric load on column)
Depth of Column using Bending Stress and Eccentric load
Go Depth of Column = (6*Eccentric load on column*Eccentricity of Loading)/(Bending Stress in Column*(Width of column^2))
Bending Stress using Eccentric Load and Eccentricity
Go Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2))
Width of Column given Bending Stress and Moment due to Load
Go Width of column = sqrt((6*Moment due to eccentric load)/(Depth of Column*Bending Stress in Column))
Depth of Column using Bending Stress and Moment Due to Load
Go Depth of Column = (6*Moment due to eccentric load)/(Bending Stress in Column*(Width of column^2))
Moment Due to Load given Bending Stress
Go Moment due to eccentric load = (Bending Stress in Column*(Depth of Column*(Width of column^2)))/6
Bending Stress given Moment due to Load
Go Bending Stress in Column = (6*Moment due to eccentric load)/(Depth of Column*(Width of column^2))
Eccentricity for given moment due to eccentric load
Go Eccentricity of Loading = Moment due to eccentric load/Eccentric load on column
Load given Moment due to Eccentric Load
Go Eccentric load on column = Moment due to eccentric load/Eccentricity of Loading
Moment due to eccentric load
Go Moment due to eccentric load = Eccentric load on column*Eccentricity of Loading
Maximum stress
Go Maximum Stress on Column Section = (Direct stress+Bending Stress in Column)
Moment of inertia of column section about neutral axis
Go MOI of Area of Circular Section = (Depth of Column*(Width of column^3))/12
Minimum stress
Go Minimum Stress Value = (Direct Stress-Bending Stress in Column)

Bending Stress using Eccentric Load and Eccentricity Formula

Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2))
ฯƒb = (6*P*eload)/(h*(b^2))

What type of stress is developed due to bending?

In torsion of a circular shaft, the action was all shear; contiguous cross sections sheared over one another in their rotation about the axis of the shaft. Here, the major stresses induced due to bending are normal stresses of tension and compression.

How to Calculate Bending Stress using Eccentric Load and Eccentricity?

Bending Stress using Eccentric Load and Eccentricity calculator uses Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)) to calculate the Bending Stress in Column, The Bending Stress using Eccentric Load and Eccentricity formula is defined as a more specific type of normal stress. Bending Stress in Column is denoted by ฯƒb symbol.

How to calculate Bending Stress using Eccentric Load and Eccentricity using this online calculator? To use this online calculator for Bending Stress using Eccentric Load and Eccentricity, enter Eccentric load on column (P), Eccentricity of Loading (eload), Depth of Column (h) & Width of column (b) and hit the calculate button. Here is how the Bending Stress using Eccentric Load and Eccentricity calculation can be explained with given input values -> 7.8E-9 = (6*7000*0.025)/(3*(0.6^2)).

FAQ

What is Bending Stress using Eccentric Load and Eccentricity?
The Bending Stress using Eccentric Load and Eccentricity formula is defined as a more specific type of normal stress and is represented as ฯƒb = (6*P*eload)/(h*(b^2)) or Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)). Eccentric load on column is the load that causes direct stress as well as bending stress, Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen, Depth of Column is the distance from the top or surface to the bottom of something & Width of column is describing how wide the column is.
How to calculate Bending Stress using Eccentric Load and Eccentricity?
The Bending Stress using Eccentric Load and Eccentricity formula is defined as a more specific type of normal stress is calculated using Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)). To calculate Bending Stress using Eccentric Load and Eccentricity, you need Eccentric load on column (P), Eccentricity of Loading (eload), Depth of Column (h) & Width of column (b). With our tool, you need to enter the respective value for Eccentric load on column, Eccentricity of Loading, Depth of Column & Width of column and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Bending Stress in Column?
In this formula, Bending Stress in Column uses Eccentric load on column, Eccentricity of Loading, Depth of Column & Width of column. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Bending Stress in Column = (6*Moment due to eccentric load)/(Depth of Column*(Width of column^2))
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!