Born Exponent using Repulsive Interaction Solution

STEP 0: Pre-Calculation Summary
Formula Used
Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach)
nborn = (log10(B/ER))/log10(r0)
This formula uses 1 Functions, 4 Variables
Functions Used
log10 - The common logarithm, also known as the base-10 logarithm or the decimal logarithm, is a mathematical function that is the inverse of the exponential function., log10(Number)
Variables Used
Born Exponent - The Born Exponent is a number between 5 and 12, determined experimentally by measuring the compressibility of the solid, or derived theoretically.
Repulsive Interaction Constant - The Repulsive Interaction Constant is the constant scaling the strength of the repulsive interaction.
Repulsive Interaction - (Measured in Joule) - The Repulsive Interaction is between atoms acts over a very short range, but is very large when distances are short.
Distance of Closest Approach - (Measured in Meter) - Distance of Closest Approach is the distance to which an alpha particle comes closer to the nucleus.
STEP 1: Convert Input(s) to Base Unit
Repulsive Interaction Constant: 40000 --> No Conversion Required
Repulsive Interaction: 5800000000000 Joule --> 5800000000000 Joule No Conversion Required
Distance of Closest Approach: 60 Angstrom --> 6E-09 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
nborn = (log10(B/ER))/log10(r0) --> (log10(40000/5800000000000))/log10(6E-09)
Evaluating ... ...
nborn = 0.992643899295252
STEP 3: Convert Result to Output's Unit
0.992643899295252 --> No Conversion Required
FINAL ANSWER
0.992643899295252 0.992644 <-- Born Exponent
(Calculation completed in 00.004 seconds)

Credits

Created by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has created this Calculator and 800+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

25 Lattice Energy Calculators

Lattice Energy using Born-Mayer equation
Go Lattice Energy = (-[Avaga-no]*Madelung Constant*Charge of Cation*Charge of Anion*([Charge-e]^2)*(1-(Constant Depending on Compressibility/Distance of Closest Approach)))/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)
Constant depending on compressibility using Born-Mayer equation
Go Constant Depending on Compressibility = (((Lattice Energy*4*pi*[Permitivity-vacuum]*Distance of Closest Approach)/([Avaga-no]*Madelung Constant*Charge of Cation*Charge of Anion*([Charge-e]^2)))+1)*Distance of Closest Approach
Minimum Potential Energy of Ion
Go Minimum Potential Energy of Ion = ((-(Charge^2)*([Charge-e]^2)*Madelung Constant)/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach))+(Repulsive Interaction Constant/(Distance of Closest Approach^Born Exponent))
Repulsive Interaction Constant using Total Energy of Ion
Go Repulsive Interaction Constant = (Total Energy of Ion-(-(Madelung Constant*(Charge^2)*([Charge-e]^2))/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)))*(Distance of Closest Approach^Born Exponent)
Total Energy of Ion given Charges and Distances
Go Total Energy of Ion = ((-(Charge^2)*([Charge-e]^2)*Madelung Constant)/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach))+(Repulsive Interaction Constant/(Distance of Closest Approach^Born Exponent))
Lattice Energy using Born-Lande equation using Kapustinskii Approximation
Go Lattice Energy = -([Avaga-no]*Number of Ions*0.88 *Charge of Cation*Charge of Anion*([Charge-e]^2)*(1-(1/Born Exponent)))/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)
Born Exponent using Born-Lande equation without Madelung Constant
Go Born Exponent = 1/(1-(-Lattice Energy*4*pi*[Permitivity-vacuum]*Distance of Closest Approach)/([Avaga-no]*Number of Ions*0.88*([Charge-e]^2)*Charge of Cation*Charge of Anion))
Lattice Energy using Born Lande Equation
Go Lattice Energy = -([Avaga-no]*Madelung Constant*Charge of Cation*Charge of Anion*([Charge-e]^2)*(1-(1/Born Exponent)))/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)
Born Exponent using Born Lande Equation
Go Born Exponent = 1/(1-(-Lattice Energy*4*pi*[Permitivity-vacuum]*Distance of Closest Approach)/([Avaga-no]*Madelung Constant*([Charge-e]^2)*Charge of Cation*Charge of Anion))
Lattice Energy using Kapustinskii equation
Go Lattice Energy for Kapustinskii Equation = (1.20200*(10^(-4))*Number of Ions*Charge of Cation*Charge of Anion*(1-((3.45*(10^(-11)))/(Radius of Cation+Radius of Anion))))/(Radius of Cation+Radius of Anion)
Repulsive Interaction Constant given Madelung constant
Go Repulsive Interaction Constant given M = (Madelung Constant*(Charge^2)*([Charge-e]^2)*(Distance of Closest Approach^(Born Exponent-1)))/(4*pi*[Permitivity-vacuum]*Born Exponent)
Lattice Energy using Original Kapustinskii equation
Go Lattice Energy for Kapustinskii Equation = ((([Kapustinskii_C]/1.20200)*1.079) *Number of Ions*Charge of Cation*Charge of Anion)/(Radius of Cation+Radius of Anion)
Repulsive Interaction using Total Energy of ion given charges and distances
Go Repulsive Interaction = Total Energy of Ion-(-(Charge^2)*([Charge-e]^2)*Madelung Constant)/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)
Born Exponent using Repulsive Interaction
Go Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach)
Electrostatic Potential Energy between pair of Ions
Go Electrostatic Potential Energy between Ion Pair = (-(Charge^2)*([Charge-e]^2))/(4*pi*[Permitivity-vacuum]*Distance of Closest Approach)
Repulsive Interaction Constant given Total Energy of Ion and Madelung Energy
Go Repulsive Interaction Constant = (Total Energy of Ion-(Madelung Energy))*(Distance of Closest Approach^Born Exponent)
Repulsive Interaction Constant
Go Repulsive Interaction Constant = Repulsive Interaction*(Distance of Closest Approach^Born Exponent)
Repulsive Interaction
Go Repulsive Interaction = Repulsive Interaction Constant/(Distance of Closest Approach^Born Exponent)
Lattice Energy using Lattice Enthalpy
Go Lattice Energy = Lattice Enthalpy-(Pressure Lattice Energy*Molar Volume Lattice Energy)
Lattice Enthalpy using Lattice Energy
Go Lattice Enthalpy = Lattice Energy+(Pressure Lattice Energy*Molar Volume Lattice Energy)
Outer Pressure of Lattice
Go Pressure Lattice Energy = (Lattice Enthalpy-Lattice Energy)/Molar Volume Lattice Energy
Volume change of lattice
Go Molar Volume Lattice Energy = (Lattice Enthalpy-Lattice Energy)/Pressure Lattice Energy
Repulsive Interaction using Total Energy of Ion
Go Repulsive Interaction = Total Energy of Ion-(Madelung Energy)
Total Energy of Ion in Lattice
Go Total Energy of Ion = Madelung Energy+Repulsive Interaction
Number of Ions using Kapustinskii Approximation
Go Number of Ions = Madelung Constant/0.88

Born Exponent using Repulsive Interaction Formula

Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach)
nborn = (log10(B/ER))/log10(r0)

What is Born–Landé equation?

The Born–Landé equation is a means of calculating the lattice energy of a crystalline ionic compound. In 1918 Max Born and Alfred Landé proposed that the lattice energy could be derived from the electrostatic potential of the ionic lattice and a repulsive potential energy term. The ionic lattice is modeled as an assembly of hard elastic spheres which are compressed together by the mutual attraction of the electrostatic charges on the ions. They achieve the observed equilibrium distance apart due to a balancing short range repulsion.

How to Calculate Born Exponent using Repulsive Interaction?

Born Exponent using Repulsive Interaction calculator uses Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach) to calculate the Born Exponent, The Born exponent using Repulsive Interaction is typically a number between 5 and 12, determined experimentally by measuring the compressibility of the solid, or derived theoretically. Born Exponent is denoted by nborn symbol.

How to calculate Born Exponent using Repulsive Interaction using this online calculator? To use this online calculator for Born Exponent using Repulsive Interaction, enter Repulsive Interaction Constant (B), Repulsive Interaction (ER) & Distance of Closest Approach (r0) and hit the calculate button. Here is how the Born Exponent using Repulsive Interaction calculation can be explained with given input values -> 0.992644 = (log10(40000/5800000000000))/log10(6E-09).

FAQ

What is Born Exponent using Repulsive Interaction?
The Born exponent using Repulsive Interaction is typically a number between 5 and 12, determined experimentally by measuring the compressibility of the solid, or derived theoretically and is represented as nborn = (log10(B/ER))/log10(r0) or Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach). The Repulsive Interaction Constant is the constant scaling the strength of the repulsive interaction, The Repulsive Interaction is between atoms acts over a very short range, but is very large when distances are short & Distance of Closest Approach is the distance to which an alpha particle comes closer to the nucleus.
How to calculate Born Exponent using Repulsive Interaction?
The Born exponent using Repulsive Interaction is typically a number between 5 and 12, determined experimentally by measuring the compressibility of the solid, or derived theoretically is calculated using Born Exponent = (log10(Repulsive Interaction Constant/Repulsive Interaction))/log10(Distance of Closest Approach). To calculate Born Exponent using Repulsive Interaction, you need Repulsive Interaction Constant (B), Repulsive Interaction (ER) & Distance of Closest Approach (r0). With our tool, you need to enter the respective value for Repulsive Interaction Constant, Repulsive Interaction & Distance of Closest Approach and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Born Exponent?
In this formula, Born Exponent uses Repulsive Interaction Constant, Repulsive Interaction & Distance of Closest Approach. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Born Exponent = 1/(1-(-Lattice Energy*4*pi*[Permitivity-vacuum]*Distance of Closest Approach)/([Avaga-no]*Madelung Constant*([Charge-e]^2)*Charge of Cation*Charge of Anion))
  • Born Exponent = 1/(1-(-Lattice Energy*4*pi*[Permitivity-vacuum]*Distance of Closest Approach)/([Avaga-no]*Number of Ions*0.88*([Charge-e]^2)*Charge of Cation*Charge of Anion))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!