Bound Moisture Weight based on Free and Equilibrium Moisture Weight Solution

STEP 0: Pre-Calculation Summary
Formula Used
Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture
Mb = MEq+MFree-MUb
This formula uses 4 Variables
Variables Used
Bound Weight of Moisture - (Measured in Kilogram) - The Bound Weight of Moisture is the amount of moisture in kg present in the wet solid which exerts a vapor pressure less than that of pure water for the system.
Equilibrium Weight of Moisture - (Measured in Kilogram) - The Equilibrium Weight of Moisture is the amount of moisture in kg present in the solid that is in equilibrium with the solid for the given drying conditions.
Free Weight of Moisture - (Measured in Kilogram) - The Free Weight of Moisture is the amount of moisture higher than the equilibrium moisture content of the solids that can be removed from the solid by drying at the given conditions.
Unbound Weight of Moisture - (Measured in Kilogram) - The Unbound Weight of Moisture is the amount of moisture in kg present in the wet solid which exerts a vapor pressure equal to that of pure water for the system.
STEP 1: Convert Input(s) to Base Unit
Equilibrium Weight of Moisture: 5 Kilogram --> 5 Kilogram No Conversion Required
Free Weight of Moisture: 34.4 Kilogram --> 34.4 Kilogram No Conversion Required
Unbound Weight of Moisture: 29 Kilogram --> 29 Kilogram No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Mb = MEq+MFree-MUb --> 5+34.4-29
Evaluating ... ...
Mb = 10.4
STEP 3: Convert Result to Output's Unit
10.4 Kilogram --> No Conversion Required
FINAL ANSWER
10.4 Kilogram <-- Bound Weight of Moisture
(Calculation completed in 00.004 seconds)

Credits

Created by Vaibhav Mishra
DJ Sanghvi College of Engineering (DJSCE), Mumbai
Vaibhav Mishra has created this Calculator and 300+ more calculators!
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

10+ Weight of Moisture Calculators

Equilibrium Moisture Weight based on Bound and Unbound Moisture Weight
Go Equilibrium Weight of Moisture = Unbound Weight of Moisture+Bound Weight of Moisture-Free Weight of Moisture
Unbound Moisture Weight based on Free and Equilibrium Moisture Weight
Go Unbound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Bound Weight of Moisture
Bound Moisture Weight based on Free and Equilibrium Moisture Weight
Go Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture
Free Moisture Weight based on Bound and Unbound Moisture Weight
Go Free Weight of Moisture = Unbound Weight of Moisture+Bound Weight of Moisture-Equilibrium Weight of Moisture
Initial Moisture based on Free and Equlibrium Moisture Weight
Go Initial Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture
Free Moisture Weight based on Equilibrium Moisture Weight
Go Free Weight of Moisture = Initial Weight of Moisture-Equilibrium Weight of Moisture
Equilibrium Moisture Weight based on Free Moisture Weight
Go Equilibrium Weight of Moisture = Initial Weight of Moisture-Free Weight of Moisture
Initial Moisture Weight based on Bound and Unbound Moisture Weight
Go Initial Weight of Moisture = Bound Weight of Moisture+Unbound Weight of Moisture
Unbound Moisture Weight based on Bound Moisture Weight
Go Unbound Weight of Moisture = Initial Weight of Moisture-Bound Weight of Moisture
Bound Moisture Weight based on Unbound Moisture Weight
Go Bound Weight of Moisture = Initial Weight of Moisture-Unbound Weight of Moisture

Bound Moisture Weight based on Free and Equilibrium Moisture Weight Formula

Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture
Mb = MEq+MFree-MUb

What is Bound Moisture?

Bound moisture, on the other hand, is the moisture that is physically or chemically bound to the material and cannot be easily removed by evaporation. Bound moisture is located within the material and is not accessible to the drying medium, such as air. This type of moisture is also known as "structural" or "interstitial" moisture, and can only be removed during the falling rate drying period, when the internal moisture content of the material is reduced.

What is Drying Mass Transfer Operation?

Drying is a mass transfer operation that involves the removal of moisture or other volatile solvents from a solid material. The process of drying is used in a variety of industries, including food processing, pharmaceuticals, chemicals, and textiles. In drying, heat is applied to the material to increase its temperature, which causes the moisture or solvent to evaporate. The evaporated moisture is then removed from the material using a drying medium, such as air, which carries away the moisture as it flows over the surface of the material. There are several types of drying techniques, including convection drying, which uses hot air to remove moisture; radiation drying, which uses infrared radiation to heat the material and remove moisture; and vacuum drying, which removes moisture by creating a low-pressure environment.

How to Calculate Bound Moisture Weight based on Free and Equilibrium Moisture Weight?

Bound Moisture Weight based on Free and Equilibrium Moisture Weight calculator uses Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture to calculate the Bound Weight of Moisture, The Bound Moisture Weight based on Free and Equilibrium Moisture Weight formula is defined as the weight of moisture that is bound to the solid as the difference between initial and unbound moisture where initial moisture is represented as a sum of free and equilibrium moisture. Bound Weight of Moisture is denoted by Mb symbol.

How to calculate Bound Moisture Weight based on Free and Equilibrium Moisture Weight using this online calculator? To use this online calculator for Bound Moisture Weight based on Free and Equilibrium Moisture Weight, enter Equilibrium Weight of Moisture (MEq), Free Weight of Moisture (MFree) & Unbound Weight of Moisture (MUb) and hit the calculate button. Here is how the Bound Moisture Weight based on Free and Equilibrium Moisture Weight calculation can be explained with given input values -> 10.4 = 5+34.4-29.

FAQ

What is Bound Moisture Weight based on Free and Equilibrium Moisture Weight?
The Bound Moisture Weight based on Free and Equilibrium Moisture Weight formula is defined as the weight of moisture that is bound to the solid as the difference between initial and unbound moisture where initial moisture is represented as a sum of free and equilibrium moisture and is represented as Mb = MEq+MFree-MUb or Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture. The Equilibrium Weight of Moisture is the amount of moisture in kg present in the solid that is in equilibrium with the solid for the given drying conditions, The Free Weight of Moisture is the amount of moisture higher than the equilibrium moisture content of the solids that can be removed from the solid by drying at the given conditions & The Unbound Weight of Moisture is the amount of moisture in kg present in the wet solid which exerts a vapor pressure equal to that of pure water for the system.
How to calculate Bound Moisture Weight based on Free and Equilibrium Moisture Weight?
The Bound Moisture Weight based on Free and Equilibrium Moisture Weight formula is defined as the weight of moisture that is bound to the solid as the difference between initial and unbound moisture where initial moisture is represented as a sum of free and equilibrium moisture is calculated using Bound Weight of Moisture = Equilibrium Weight of Moisture+Free Weight of Moisture-Unbound Weight of Moisture. To calculate Bound Moisture Weight based on Free and Equilibrium Moisture Weight, you need Equilibrium Weight of Moisture (MEq), Free Weight of Moisture (MFree) & Unbound Weight of Moisture (MUb). With our tool, you need to enter the respective value for Equilibrium Weight of Moisture, Free Weight of Moisture & Unbound Weight of Moisture and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Bound Weight of Moisture?
In this formula, Bound Weight of Moisture uses Equilibrium Weight of Moisture, Free Weight of Moisture & Unbound Weight of Moisture. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Bound Weight of Moisture = Initial Weight of Moisture-Unbound Weight of Moisture
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!