Capacitance responsible for given overcut Solution

STEP 0: Pre-Calculation Summary
Formula Used
Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333)
Csd = ((O-B)/A)^(1/0.333)
This formula uses 4 Variables
Variables Used
Capacitance in Surface Defect - (Measured in Farad) - Capacitance in Surface Defect is the ability of a component or circuit to store and collect energy in the form of an electrical charge.
Overcut in mm per side - Overcut in mm per side is the overcut produced during EDM.
Overcut Constant B - (Measured in Meter) - Overcut Constant B is an empirical constant used to calculate overcut produced in the EDM process its different for different materials at different voltages passing through it.
Overcut Constant A - (Measured in Meter) - Overcut Constant A is an empirical constant used in overcut calculations of EDM, its different for different materials at different voltages passing through it.
STEP 1: Convert Input(s) to Base Unit
Overcut in mm per side: 5 --> No Conversion Required
Overcut Constant B: 2.5 Meter --> 2.5 Meter No Conversion Required
Overcut Constant A: 1.4 Meter --> 1.4 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Csd = ((O-B)/A)^(1/0.333) --> ((5-2.5)/1.4)^(1/0.333)
Evaluating ... ...
Csd = 5.70416541457262
STEP 3: Convert Result to Output's Unit
5.70416541457262 Farad -->5704165.41457262 Microfarad (Check conversion here)
FINAL ANSWER
5704165.41457262 5.7E+6 Microfarad <-- Capacitance in Surface Defect
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Vaibhav Malani
National Institute of Technology (NIT), Tiruchirapalli
Vaibhav Malani has verified this Calculator and 200+ more calculators!

4 Overcut Calculators

Capacitance responsible for given overcut
Go Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333)
Overcut constant A
Go Overcut Constant A = (Overcut in mm per side-Overcut Constant B)/Capacitance in Surface Defect^0.333
Overcut produced per side
Go Overcut in mm per side = Overcut Constant A*Capacitance in Surface Defect^0.333+Overcut Constant B
Overcut constant B
Go Overcut Constant B = Overcut in mm per side-Overcut Constant A*Capacitance in Surface Defect^0.333

Capacitance responsible for given overcut Formula

Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333)
Csd = ((O-B)/A)^(1/0.333)

What factors affects surface finish during EDM ?

The amount of material removed and the surface finish produced is dependent upon the current in the spark. The material removed by the spark can be assumed to be a crater. The amount removed therefore will depend upon the crater depth, which is directly proportional to the current. Thus as the material removed increases and at the same time, the surface finish also decreases. However, decreasing the current in the spark, but increasing its frequency will improve the surface finish in view of the small crater size, but at the same time, the material removal rate can be maintained by increasing the frequency.

How to Calculate Capacitance responsible for given overcut?

Capacitance responsible for given overcut calculator uses Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333) to calculate the Capacitance in Surface Defect, Capacitance responsible for given overcut formula is defined as the minimum capacitance that will create the given overcut due to side sparks in EDM. Capacitance in Surface Defect is denoted by Csd symbol.

How to calculate Capacitance responsible for given overcut using this online calculator? To use this online calculator for Capacitance responsible for given overcut, enter Overcut in mm per side (O), Overcut Constant B (B) & Overcut Constant A (A) and hit the calculate button. Here is how the Capacitance responsible for given overcut calculation can be explained with given input values -> 5.7E+12 = ((5-2.5)/1.4)^(1/0.333).

FAQ

What is Capacitance responsible for given overcut?
Capacitance responsible for given overcut formula is defined as the minimum capacitance that will create the given overcut due to side sparks in EDM and is represented as Csd = ((O-B)/A)^(1/0.333) or Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333). Overcut in mm per side is the overcut produced during EDM, Overcut Constant B is an empirical constant used to calculate overcut produced in the EDM process its different for different materials at different voltages passing through it & Overcut Constant A is an empirical constant used in overcut calculations of EDM, its different for different materials at different voltages passing through it.
How to calculate Capacitance responsible for given overcut?
Capacitance responsible for given overcut formula is defined as the minimum capacitance that will create the given overcut due to side sparks in EDM is calculated using Capacitance in Surface Defect = ((Overcut in mm per side-Overcut Constant B)/Overcut Constant A)^(1/0.333). To calculate Capacitance responsible for given overcut, you need Overcut in mm per side (O), Overcut Constant B (B) & Overcut Constant A (A). With our tool, you need to enter the respective value for Overcut in mm per side, Overcut Constant B & Overcut Constant A and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!