Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section Solution

STEP 0: Pre-Calculation Summary
Formula Used
Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel)
Fpkf = PuR/(0.87*As)
This formula uses 3 Variables
Variables Used
Tensile Strength of Prestressed Steel - (Measured in Pascal) - Tensile Strength of Prestressed Steel is the tensile capacity of the prestressed tendons.
Tensile Force - (Measured in Newton) - Tensile Force is the stretching force acted on the section having prestressed tendons within it.
Area of Prestressing Steel - (Measured in Square Meter) - Area of Prestressing Steel is the total cross sectional area of tendons.
STEP 1: Convert Input(s) to Base Unit
Tensile Force: 4.35 Kilonewton --> 4350 Newton (Check conversion here)
Area of Prestressing Steel: 20.2 Square Millimeter --> 2.02E-05 Square Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Fpkf = PuR/(0.87*As) --> 4350/(0.87*2.02E-05)
Evaluating ... ...
Fpkf = 247524752.475248
STEP 3: Convert Result to Output's Unit
247524752.475248 Pascal -->247.524752475248 Megapascal (Check conversion here)
FINAL ANSWER
247.524752475248 247.5248 Megapascal <-- Tensile Strength of Prestressed Steel
(Calculation completed in 00.004 seconds)

Credits

Created by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has created this Calculator and 500+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

4 Analysis of Ultimate Strength Calculators

Ultimate Tensile Strength of Section in Presence of Non-Prestressing Reinforcement
Go Tensile Force = 0.87*Tensile Strength of Prestressed Steel*Area of Prestressing Steel+(0.87*Yield Strength of Steel*Area of Reinforcement)
Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section
Go Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel)
Area of Prestressing Tendon for Known Tensile Strength of Section
Go Area of Prestressing Steel = Tensile Force/(0.87*Tensile Strength of Prestressed Steel)
Ultimate Tensile Force in Absence of Non-Prestressed Reinforcement
Go Tensile Force = 0.87*Tensile Strength of Prestressed Steel*Area of Prestressing Steel

Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section Formula

Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel)
Fpkf = PuR/(0.87*As)

What are the characteristic features of Prestressing Steel?

For prestressed concrete, high strength steel is used to provide high elongation to maintain the steel stress after the prestress loss.
Ideally, it should also:
• Remain elastic up to relatively high stress.
• Show sufficient ductility before failure.
• Have good bonding properties, low relaxation, good resistance to corrosion.
• Be economical and easy to handle

How to Calculate Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section?

Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section calculator uses Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel) to calculate the Tensile Strength of Prestressed Steel, The Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section is defined as the above formula considering IS 1343:1980. Tensile Strength of Prestressed Steel is denoted by Fpkf symbol.

How to calculate Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section using this online calculator? To use this online calculator for Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section, enter Tensile Force (PuR) & Area of Prestressing Steel (As) and hit the calculate button. Here is how the Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section calculation can be explained with given input values -> 0.00025 = 4350/(0.87*2.02E-05).

FAQ

What is Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section?
The Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section is defined as the above formula considering IS 1343:1980 and is represented as Fpkf = PuR/(0.87*As) or Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel). Tensile Force is the stretching force acted on the section having prestressed tendons within it & Area of Prestressing Steel is the total cross sectional area of tendons.
How to calculate Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section?
The Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section is defined as the above formula considering IS 1343:1980 is calculated using Tensile Strength of Prestressed Steel = Tensile Force/(0.87*Area of Prestressing Steel). To calculate Characteristic Tensile Strength of Prestressing Tendons for Known Tensile Strength of Section, you need Tensile Force (PuR) & Area of Prestressing Steel (As). With our tool, you need to enter the respective value for Tensile Force & Area of Prestressing Steel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!