Coefficient of Discharge through Flume given Discharge Flow through Channel Solution

STEP 0: Pre-Calculation Summary
Formula Used
Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)))))
Cd = (Q/(Ai*Af)*(sqrt(((Ai^2)-(Af^2))/(2*[g]*(hi-ho)))))
This formula uses 1 Constants, 1 Functions, 6 Variables
Constants Used
[g] - Gravitational acceleration on Earth Value Taken As 9.80665
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Coefficient of Discharge - Coefficient of Discharge is ratio of Actual discharge to theoretical discharge.
Discharge of Channel - (Measured in Cubic Meter per Second) - Discharge of Channel is the rate of flow of a liquid.
Cross Section Area 1 - (Measured in Square Meter) - Cross Section Area 1 is the area of cross section at the inlet of the structure (venturimeter or pipe).
Cross Section Area 2 - (Measured in Square Meter) - Cross Section Area 2 is defined as the area of cross-section at the throat (venturimeter) of the structure.
Loss of Head at Entrance - (Measured in Meter) - The Loss of Head at Entrance of a pipe is the loss that occurs when a liquid flows from a large tank into a pipe.
Loss of Head at Exit - (Measured in Meter) - The Loss of Head at Exit of a pipe is due to the velocity of liquid dissipated in the form of a free jet.
STEP 1: Convert Input(s) to Base Unit
Discharge of Channel: 14 Cubic Meter per Second --> 14 Cubic Meter per Second No Conversion Required
Cross Section Area 1: 7.1 Square Meter --> 7.1 Square Meter No Conversion Required
Cross Section Area 2: 1.8 Square Meter --> 1.8 Square Meter No Conversion Required
Loss of Head at Entrance: 20 Meter --> 20 Meter No Conversion Required
Loss of Head at Exit: 15.1 Meter --> 15.1 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Cd = (Q/(Ai*Af)*(sqrt(((Ai^2)-(Af^2))/(2*[g]*(hi-ho))))) --> (14/(7.1*1.8)*(sqrt(((7.1^2)-(1.8^2))/(2*[g]*(20-15.1)))))
Evaluating ... ...
Cd = 0.767461758351623
STEP 3: Convert Result to Output's Unit
0.767461758351623 --> No Conversion Required
FINAL ANSWER
0.767461758351623 0.767462 <-- Coefficient of Discharge
(Calculation completed in 00.004 seconds)

Credits

Created by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has created this Calculator and 1300+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

10+ Metering Flumes Calculators

Coefficient of Discharge through Flume given Discharge Flow through Rectangular Channel
Go Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)))))
Coefficient of Discharge through Flume given Discharge Flow through Channel
Go Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)))))
Discharge Flow through Rectangular Channel
Go Discharge of Channel = (Coefficient of Discharge*Cross Section Area 1*Cross Section Area 2)*(sqrt(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)/((Cross Section Area 1^2)-(Cross Section Area 2^2))))
Discharge Flow through Channel
Go Discharge of Channel = (Coefficient of Discharge*Cross Section Area 1*Cross Section Area 2)*(sqrt(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)/((Cross Section Area 1^2)-(Cross Section Area 2^2))))
Head at Entrance of Section given Discharge Flow through Channel
Go Loss of Head at Exit = Loss of Head at Entrance-(Discharge of Channel/(Coefficient of Discharge*Cross Section Area 1*Cross Section Area 2*(sqrt(2*[g]/(Cross Section Area 1^2-Cross Section Area 2^2)))))^2
Head at Entrance given Discharge through Channel
Go Loss of Head at Entrance = (Discharge of Channel/(Coefficient of Discharge*Cross Section Area 1*Cross Section Area 2*(sqrt(2*[g]/(Cross Section Area 1^2-Cross Section Area 2^2)))))^2+Loss of Head at Exit
Depth of Flow given Discharge through Critical Depth Flume
Go Depth of Flow = (Discharge of Channel/(Width of Throat*Coefficient of Discharge))^(2/3)
Discharge Coefficient given Discharge through Critical Depth Flume
Go Coefficient of Discharge = Discharge of Channel/(Width of Throat*(Depth of Flow^1.5))
Width of Throat given Discharge through Critical Depth Flume
Go Width of Throat = Discharge of Channel/(Coefficient of Discharge*(Depth of Flow^1.5))
Discharge through Critical Depth Flume
Go Discharge of Channel = Coefficient of Discharge*Width of Throat*(Depth of Flow^1.5)

Coefficient of Discharge through Flume given Discharge Flow through Channel Formula

Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)))))
Cd = (Q/(Ai*Af)*(sqrt(((Ai^2)-(Af^2))/(2*[g]*(hi-ho)))))

What is Rate of Flow?

In physics and engineering, in particular fluid dynamics, the volumetric flow rate is the volume of fluid which passes per unit time; usually it is represented by the symbol Q. The SI unit is cubic metres per second. Another unit used is standard cubic centimetres per minute. In hydrometry, it is known as discharge.

How to Calculate Coefficient of Discharge through Flume given Discharge Flow through Channel?

Coefficient of Discharge through Flume given Discharge Flow through Channel calculator uses Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit))))) to calculate the Coefficient of Discharge, The Coefficient of Discharge through Flume given Discharge Flow through Channel is defined as ratio of actual to theoritical discharge. Coefficient of Discharge is denoted by Cd symbol.

How to calculate Coefficient of Discharge through Flume given Discharge Flow through Channel using this online calculator? To use this online calculator for Coefficient of Discharge through Flume given Discharge Flow through Channel, enter Discharge of Channel (Q), Cross Section Area 1 (Ai), Cross Section Area 2 (Af), Loss of Head at Entrance (hi) & Loss of Head at Exit (ho) and hit the calculate button. Here is how the Coefficient of Discharge through Flume given Discharge Flow through Channel calculation can be explained with given input values -> 0.759748 = (14/(7.1*1.8)*(sqrt(((7.1^2)-(1.8^2))/(2*[g]*(20-15.1))))).

FAQ

What is Coefficient of Discharge through Flume given Discharge Flow through Channel?
The Coefficient of Discharge through Flume given Discharge Flow through Channel is defined as ratio of actual to theoritical discharge and is represented as Cd = (Q/(Ai*Af)*(sqrt(((Ai^2)-(Af^2))/(2*[g]*(hi-ho))))) or Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit))))). Discharge of Channel is the rate of flow of a liquid, Cross Section Area 1 is the area of cross section at the inlet of the structure (venturimeter or pipe), Cross Section Area 2 is defined as the area of cross-section at the throat (venturimeter) of the structure, The Loss of Head at Entrance of a pipe is the loss that occurs when a liquid flows from a large tank into a pipe & The Loss of Head at Exit of a pipe is due to the velocity of liquid dissipated in the form of a free jet.
How to calculate Coefficient of Discharge through Flume given Discharge Flow through Channel?
The Coefficient of Discharge through Flume given Discharge Flow through Channel is defined as ratio of actual to theoritical discharge is calculated using Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit))))). To calculate Coefficient of Discharge through Flume given Discharge Flow through Channel, you need Discharge of Channel (Q), Cross Section Area 1 (Ai), Cross Section Area 2 (Af), Loss of Head at Entrance (hi) & Loss of Head at Exit (ho). With our tool, you need to enter the respective value for Discharge of Channel, Cross Section Area 1, Cross Section Area 2, Loss of Head at Entrance & Loss of Head at Exit and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Coefficient of Discharge?
In this formula, Coefficient of Discharge uses Discharge of Channel, Cross Section Area 1, Cross Section Area 2, Loss of Head at Entrance & Loss of Head at Exit. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Coefficient of Discharge = (Discharge of Channel/(Cross Section Area 1*Cross Section Area 2)*(sqrt(((Cross Section Area 1^2)-(Cross Section Area 2^2))/(2*[g]*(Loss of Head at Entrance-Loss of Head at Exit)))))
  • Coefficient of Discharge = Discharge of Channel/(Width of Throat*(Depth of Flow^1.5))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!