Constant Depending upon Soil at Base of Well given Specific Capacity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Constant = Cross-Sectional Area*Specific Capacity
K = Acs*KA
This formula uses 3 Variables
Variables Used
Constant - Constant depending on the soil at the base of the well.
Cross-Sectional Area - (Measured in Square Meter) - Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Specific Capacity - (Measured in Meter per Second) - Specific Capacity of an open well.
STEP 1: Convert Input(s) to Base Unit
Cross-Sectional Area: 13 Square Meter --> 13 Square Meter No Conversion Required
Specific Capacity: 2 Meter per Hour --> 0.000555555555555556 Meter per Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
K = Acs*KA --> 13*0.000555555555555556
Evaluating ... ...
K = 0.00722222222222223
STEP 3: Convert Result to Output's Unit
0.00722222222222223 --> No Conversion Required
FINAL ANSWER
0.00722222222222223 0.007222 <-- Constant
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

8 Constant Depending upon Base Soil Calculators

Constant Depression Head given Discharge and Time in Hours
Go Constant Depression Head = Discharge/((2.303*Cross-Sectional Area*log((Depression Head 1/Depression Head 2),10))/Time)
Constant Depending upon Soil at Base of Well
Go Constant = (Cross-Sectional Area/Time)*log((Depression Head 1/Depression Head 2),e)
Constant Depending upon Soil at Base of Well with Base 10
Go Constant = ((Cross-Sectional Area*2.303)/Time)*log((Depression Head 1/Depression Head 2),10)
Constant Depending upon Soil at Base of Well given Specific Capacity
Go Constant = Cross-Sectional Area*Specific Capacity
Constant Depending upon Soil at Base of Well given Discharge from Well
Go Constant = Discharge/Constant Depression Head
Constant Depression Head given Discharge from Well
Go Constant Depression Head = Discharge/Constant
Constant Depending upon Soil at Base of Well given Clay Soil
Go Constant = 0.25*Cross-Sectional Area
Constant Depending upon Soil at Base of Well given Fine Sand
Go Constant = 0.5*Cross-Sectional Area

Constant Depending upon Soil at Base of Well given Specific Capacity Formula

Constant = Cross-Sectional Area*Specific Capacity
K = Acs*KA

What is specific capacity ?

Specific capacity is a quantity that which a water well can produce per unit of drawdown. It is normally obtained from a step drawdown test.

How to Calculate Constant Depending upon Soil at Base of Well given Specific Capacity?

Constant Depending upon Soil at Base of Well given Specific Capacity calculator uses Constant = Cross-Sectional Area*Specific Capacity to calculate the Constant, Constant Depending upon Soil at Base of Well given Specific Capacity calculates value of constant depending upon soil when we have prior information of other parameters used. Constant is denoted by K symbol.

How to calculate Constant Depending upon Soil at Base of Well given Specific Capacity using this online calculator? To use this online calculator for Constant Depending upon Soil at Base of Well given Specific Capacity, enter Cross-Sectional Area (Acs) & Specific Capacity (KA) and hit the calculate button. Here is how the Constant Depending upon Soil at Base of Well given Specific Capacity calculation can be explained with given input values -> 0.007222 = 13*0.000555555555555556.

FAQ

What is Constant Depending upon Soil at Base of Well given Specific Capacity?
Constant Depending upon Soil at Base of Well given Specific Capacity calculates value of constant depending upon soil when we have prior information of other parameters used and is represented as K = Acs*KA or Constant = Cross-Sectional Area*Specific Capacity. Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Specific Capacity of an open well.
How to calculate Constant Depending upon Soil at Base of Well given Specific Capacity?
Constant Depending upon Soil at Base of Well given Specific Capacity calculates value of constant depending upon soil when we have prior information of other parameters used is calculated using Constant = Cross-Sectional Area*Specific Capacity. To calculate Constant Depending upon Soil at Base of Well given Specific Capacity, you need Cross-Sectional Area (Acs) & Specific Capacity (KA). With our tool, you need to enter the respective value for Cross-Sectional Area & Specific Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Constant?
In this formula, Constant uses Cross-Sectional Area & Specific Capacity. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Constant = (Cross-Sectional Area/Time)*log((Depression Head 1/Depression Head 2),e)
  • Constant = ((Cross-Sectional Area*2.303)/Time)*log((Depression Head 1/Depression Head 2),10)
  • Constant = 0.25*Cross-Sectional Area
  • Constant = 0.5*Cross-Sectional Area
  • Constant = Discharge/Constant Depression Head
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!