Cutting Velocity using Taylor's Tool Life and Intercept Solution

STEP 0: Pre-Calculation Summary
Formula Used
Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent)
Vcutting = C/(T^n)
This formula uses 4 Variables
Variables Used
Taylor Cutting Velocity - (Measured in Meter per Second) - Taylor Cutting Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Taylor's Intercept or Taylor's Constant - Taylor's Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment.
Tool Life - (Measured in Second) - Tool Life is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylor's Tool Life Exponent - Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of Tool Wear.
STEP 1: Convert Input(s) to Base Unit
Taylor's Intercept or Taylor's Constant: 85.13059 --> No Conversion Required
Tool Life: 75 Minute --> 4500 Second (Check conversion here)
Taylor's Tool Life Exponent: 0.846625 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vcutting = C/(T^n) --> 85.13059/(4500^0.846625)
Evaluating ... ...
Vcutting = 0.0687360543612991
STEP 3: Convert Result to Output's Unit
0.0687360543612991 Meter per Second -->4.12416326167794 Meter per Minute (Check conversion here)
FINAL ANSWER
4.12416326167794 4.124163 Meter per Minute <-- Taylor Cutting Velocity
(Calculation completed in 00.004 seconds)

Credits

Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verified by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has verified this Calculator and 400+ more calculators!

9 Cutting Velocity Calculators

Cutting Velocity for given Taylor's Tool Life
Go Cutting Velocity = Taylor's Intercept or Taylor's Constant/((Tool Life^Taylor's Tool Life Exponent)*(Feed Rate^Taylor's exponent for Feed Rate)*(Depth of Cut^Taylor's exponent for Depth of Cut))
Taylor's Exponent given Cutting Velocities, Tool Lives for two Machining Conditions
Go Taylor's Tool Life Exponent = (-1)*ln(Cutting Velocity/Reference Cutting Velocity)/ln(Tool Life/Reference Tool Life)
Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition
Go Reference Cutting Velocity = Cutting Velocity/((Reference Tool Life/Tool Life)^Taylor's Tool Life Exponent)
Cutting Velocity given Tool Lives and Cutting Velocity for Reference Machining Condition
Go Cutting Velocity = Reference Cutting Velocity*(Reference Tool Life/Tool Life)^Taylor's Tool Life Exponent
Cutting Velocity for given Tool Life and Volume of Metal Removed
Go Cutting Velocity = Volume of Metal Removed/(Tool Life*Feed Rate*Depth of Cut)
Taylor's Intercept given Cutting Velocity and Taylor's Tool Life
Go Taylor's Intercept or Taylor's Constant = Taylor Cutting Velocity*(Tool Life^Taylor's Tool Life Exponent)
Cutting Velocity using Taylor's Tool Life and Intercept
Go Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent)
Cutting Speed of Free-Cutting Steel given Cutting Velocity of Tool and Machinability Index
Go Cutting Speed of Free-Cutting Steel = Cutting Velocity*100/Machinability Index of a Material
Cutting Velocity using Machinability Index
Go Cutting Velocity = Machinability Index of a Material*Cutting Speed of Free-Cutting Steel/100

Cutting Velocity using Taylor's Tool Life and Intercept Formula

Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent)
Vcutting = C/(T^n)

Taylor's Tool Life Equation

This relationship is credited to F. W. Taylor (~1900). It gives the relation between cutting speed and tool life.
VTn = C
where V= Cutting Velocity, T= Tool Life, n and C are Taylor's Constant.

How to Calculate Cutting Velocity using Taylor's Tool Life and Intercept?

Cutting Velocity using Taylor's Tool Life and Intercept calculator uses Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent) to calculate the Taylor Cutting Velocity, The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed. Taylor Cutting Velocity is denoted by Vcutting symbol.

How to calculate Cutting Velocity using Taylor's Tool Life and Intercept using this online calculator? To use this online calculator for Cutting Velocity using Taylor's Tool Life and Intercept, enter Taylor's Intercept or Taylor's Constant (C), Tool Life (T) & Taylor's Tool Life Exponent (n) and hit the calculate button. Here is how the Cutting Velocity using Taylor's Tool Life and Intercept calculation can be explained with given input values -> 247.4498 = 85.13059/(4500^0.846625).

FAQ

What is Cutting Velocity using Taylor's Tool Life and Intercept?
The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed and is represented as Vcutting = C/(T^n) or Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent). Taylor's Intercept or Taylor's Constant is an experimental constant that depends mainly upon the tool-work materials and the cutting environment, Tool Life is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations & Taylor's Tool Life Exponent is an experimental exponent that helps in quantifying the rate of Tool Wear.
How to calculate Cutting Velocity using Taylor's Tool Life and Intercept?
The Cutting Velocity using Taylor's Tool Life and Intercept is a method to find the maximum Cutting Velocity with which the Workpiece can be machined when the time interval of Tool Sharpening is fixed is calculated using Taylor Cutting Velocity = Taylor's Intercept or Taylor's Constant/(Tool Life^Taylor's Tool Life Exponent). To calculate Cutting Velocity using Taylor's Tool Life and Intercept, you need Taylor's Intercept or Taylor's Constant (C), Tool Life (T) & Taylor's Tool Life Exponent (n). With our tool, you need to enter the respective value for Taylor's Intercept or Taylor's Constant, Tool Life & Taylor's Tool Life Exponent and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!