Deflection for I Beam when Load in Middle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2))
δ = (Wp*(L^3))/(58*Acs*(db^2))
This formula uses 5 Variables
Variables Used
Deflection of Beam - (Measured in Meter) - Deflection of Beam is the degree to which a structural element is displaced under a load (due to its deformation). It may refer to an angle or a distance.
Greatest Safe Point Load - (Measured in Newton) - The Greatest Safe Point Load refers to the maximum weight or force that can be applied to a structure without causing failure or damage, ensuring structural integrity and safety.
Length of Beam - (Measured in Meter) - Length of Beam is the center to center distance between the supports or the effective length of the beam.
Cross Sectional Area of Beam - (Measured in Square Meter) - Cross Sectional Area of Beam the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Depth of Beam - (Measured in Meter) - Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.
STEP 1: Convert Input(s) to Base Unit
Greatest Safe Point Load: 1.25 Kilonewton --> 1250 Newton (Check conversion here)
Length of Beam: 10.02 Foot --> 3.05409600001222 Meter (Check conversion here)
Cross Sectional Area of Beam: 13 Square Meter --> 13 Square Meter No Conversion Required
Depth of Beam: 10.01 Inch --> 0.254254000001017 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
δ = (Wp*(L^3))/(58*Acs*(db^2)) --> (1250*(3.05409600001222^3))/(58*13*(0.254254000001017^2))
Evaluating ... ...
δ = 730.551995789753
STEP 3: Convert Result to Output's Unit
730.551995789753 Meter -->28761.8895979067 Inch (Check conversion here)
FINAL ANSWER
28761.8895979067 28761.89 Inch <-- Deflection of Beam
(Calculation completed in 00.020 seconds)

Credits

Created by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has created this Calculator and 100+ more calculators!
Verified by Rudrani Tidke
Cummins College of Engineering for Women (CCEW), Pune
Rudrani Tidke has verified this Calculator and 50+ more calculators!

16 Calculation of Deflection Calculators

Deflection for Hollow Cylinder when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(38*(Cross Sectional Area of Beam*(Depth of Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of Beam^2)))
Deflection for Hollow Rectangle when Load is Distributed
Go Deflection of Beam = Greatest Safe Distributed Load*(Length of Beam^3)/(52*(Cross Sectional Area of Beam*Depth of Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of Beam^2))
Deflection for Hollow Rectangle given Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(32*((Cross Sectional Area of Beam*Depth of Beam^2)-(Interior Cross-Sectional Area of Beam*Interior Depth of Beam^2)))
Deflection for Hollow Cylinder when Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(24*(Cross Sectional Area of Beam*(Depth of Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of Beam^2)))
Deflection for Solid Cylinder when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*Distance between Supports^3)/(38*Cross Sectional Area of Beam*Depth of Beam^2)
Deflection for Solid Cylinder when Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*Distance between Supports^3)/(24*Cross Sectional Area of Beam*Depth of Beam^2)
Deflection for Channel or Z Bar when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(85*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for Deck Beam when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(80*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for I Beam when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(93*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for Even Legged Angle when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(52*Cross Sectional Area of Beam*Depth of Beam^2)
Deflection for Solid Rectangle when Load is Distributed
Go Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(52*Cross Sectional Area of Beam*Depth of Beam^2)
Deflection for Channel or Z Bar when Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(53*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for Deck Beam given Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(50*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for I Beam when Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2))
Deflection for Even Legged Angle when Load in Middle
Go Deflection of Beam = Greatest Safe Point Load*(Length of Beam^3)/(32*Cross Sectional Area of Beam*Depth of Beam^2)
Deflection for Solid Rectangle when Load in Middle
Go Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(32*Cross Sectional Area of Beam*Depth of Beam^2)

Deflection for I Beam when Load in Middle Formula

Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2))
δ = (Wp*(L^3))/(58*Acs*(db^2))

What is Deflection?

Deflection is the degree to which a structural element is displaced under a load. It may refer to an angle or a distance. The deflection distance of a member under a load can be calculated by integrating the function that mathematically describes the slope of the deflected shape of the member under that load. Standard formulas exist for the deflection of common beam configurations and load cases at discrete locations. Otherwise methods such as virtual work, direct integration, Castigliano's method, Macaulay's method or the direct stiffness method are used.

How to Calculate Deflection for I Beam when Load in Middle?

Deflection for I Beam when Load in Middle calculator uses Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2)) to calculate the Deflection of Beam, The Deflection for I Beam when Load in Middle formula is defined as the vertical displacement or bending experienced by the beam under the load. Deflection of Beam is denoted by δ symbol.

How to calculate Deflection for I Beam when Load in Middle using this online calculator? To use this online calculator for Deflection for I Beam when Load in Middle, enter Greatest Safe Point Load (Wp), Length of Beam (L), Cross Sectional Area of Beam (Acs) & Depth of Beam (db) and hit the calculate button. Here is how the Deflection for I Beam when Load in Middle calculation can be explained with given input values -> 1.1E+6 = (1250*(3.05409600001222^3))/(58*13*(0.254254000001017^2)).

FAQ

What is Deflection for I Beam when Load in Middle?
The Deflection for I Beam when Load in Middle formula is defined as the vertical displacement or bending experienced by the beam under the load and is represented as δ = (Wp*(L^3))/(58*Acs*(db^2)) or Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2)). The Greatest Safe Point Load refers to the maximum weight or force that can be applied to a structure without causing failure or damage, ensuring structural integrity and safety, Length of Beam is the center to center distance between the supports or the effective length of the beam, Cross Sectional Area of Beam the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.
How to calculate Deflection for I Beam when Load in Middle?
The Deflection for I Beam when Load in Middle formula is defined as the vertical displacement or bending experienced by the beam under the load is calculated using Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(58*Cross Sectional Area of Beam*(Depth of Beam^2)). To calculate Deflection for I Beam when Load in Middle, you need Greatest Safe Point Load (Wp), Length of Beam (L), Cross Sectional Area of Beam (Acs) & Depth of Beam (db). With our tool, you need to enter the respective value for Greatest Safe Point Load, Length of Beam, Cross Sectional Area of Beam & Depth of Beam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Deflection of Beam?
In this formula, Deflection of Beam uses Greatest Safe Point Load, Length of Beam, Cross Sectional Area of Beam & Depth of Beam. We can use 15 other way(s) to calculate the same, which is/are as follows -
  • Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(32*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(52*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(32*((Cross Sectional Area of Beam*Depth of Beam^2)-(Interior Cross-Sectional Area of Beam*Interior Depth of Beam^2)))
  • Deflection of Beam = Greatest Safe Distributed Load*(Length of Beam^3)/(52*(Cross Sectional Area of Beam*Depth of Beam^-Interior Cross-Sectional Area of Beam*Interior Depth of Beam^2))
  • Deflection of Beam = (Greatest Safe Point Load*Distance between Supports^3)/(24*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Distributed Load*Distance between Supports^3)/(38*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Point Load*Length of Beam^3)/(24*(Cross Sectional Area of Beam*(Depth of Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of Beam^2)))
  • Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(38*(Cross Sectional Area of Beam*(Depth of Beam^2)-Interior Cross-Sectional Area of Beam*(Interior Depth of Beam^2)))
  • Deflection of Beam = Greatest Safe Point Load*(Length of Beam^3)/(32*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Distributed Load*Length of Beam^3)/(52*Cross Sectional Area of Beam*Depth of Beam^2)
  • Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(53*Cross Sectional Area of Beam*(Depth of Beam^2))
  • Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(85*Cross Sectional Area of Beam*(Depth of Beam^2))
  • Deflection of Beam = (Greatest Safe Point Load*(Length of Beam^3))/(50*Cross Sectional Area of Beam*(Depth of Beam^2))
  • Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(80*Cross Sectional Area of Beam*(Depth of Beam^2))
  • Deflection of Beam = (Greatest Safe Distributed Load*(Length of Beam^3))/(93*Cross Sectional Area of Beam*(Depth of Beam^2))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!