Depression Head in Well at Time T after Pumping Stopped with Base 10 Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depression head = Depression head/10^((Specific Capacity*Time)/2.303)
h2 = h1/10^((KA*t)/2.303)
This formula uses 4 Variables
Variables Used
Depression head - (Measured in Meter) - Depression head in the well at a time T after the pumping stopped.
Depression head - (Measured in Meter) - Depression head in the well when pumping stopped.
Specific Capacity - (Measured in Meter per Hour) - Specific Capacity of an open well.
Time - (Measured in Hour) - Time can be defined as the ongoing and continuous sequence of events that occur in succession, from the past through the present to the future.
STEP 1: Convert Input(s) to Base Unit
Depression head: 3 Meter --> 3 Meter No Conversion Required
Specific Capacity: 2 Meter per Hour --> 2 Meter per Hour No Conversion Required
Time: 4 Hour --> 4 Hour No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h2 = h1/10^((KA*t)/2.303) --> 3/10^((2*4)/2.303)
Evaluating ... ...
h2 = 0.0010078394110571
STEP 3: Convert Result to Output's Unit
0.0010078394110571 Meter --> No Conversion Required
FINAL ANSWER
0.0010078394110571 0.001008 Meter <-- Depression head
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

11 Depression Head after Pumping Stopped Calculators

Depression Head in Well at Time T after Pumping Stopped with known Discharge and Time
Go Depression head = Depression head/(10^((Discharge*Time/3600)/(Cross-Sectional Area*Constant Depression Head*2.303)))
Depression Head in Well at Time T given Pumping Stopped and Constant
Go Depression head = Depression head/(exp((Constant*Time)/Cross-Sectional Area))
Depression Head in Well at Time T given Pumping Stopped and Constant with Base 10
Go Depression head = Depression head/(10^((Constant*Time)/(Cross-Sectional Area*2.303)))
Depression Head in Well at Time T after Pumping Stopped
Go Depression head = Depression head/exp(Specific Capacity*Time)
Depression Head in Well at Time T after Pumping Stopped with Base 10
Go Depression head = Depression head/10^((Specific Capacity*Time)/2.303)
Depression Head in Well at Time T after Pumping Stopped with Base 10 and Fine Sand is Present
Go Depression head = (Depression head/10^(((0.5)*(Time/3600)/2.303)))
Depression Head in Well at Time T after Pumping Stopped and Coarse Sand is Present
Go Depression head = (Depression head/10^((1/2.303)*(Time/3600)))
Depression Head in Well at Time T after Pumping Stopped with Base 10 and Clay soil is Present
Go Depression head = Depression head/10^((0.25*Time/3600)/2.303)
Depression Head in Well at Time T after Pumping Stopped and Fine Sand is Present
Go Depression head = Depression head/10^((0.5/2.303)*Time/3600)
Depression Head in Well at Time T after Pumping Stopped with Base 10 in Coarse Sand
Go Depression head = Depression head/10^((1*Time/3600)/2.303)
Depression Head in Well at Time T after Pumping Stopped and Clay Soil is Present
Go Depression head = Depression head/10^((0.25*Time/3600))

Depression Head in Well at Time T after Pumping Stopped with Base 10 Formula

Depression head = Depression head/10^((Specific Capacity*Time)/2.303)
h2 = h1/10^((KA*t)/2.303)

What is yield of well ?

Yield of well is the rate at which water percolates into the well under the safe maximum working head or critical depression head. It is expressed in m3/hr or It/min.

How to Calculate Depression Head in Well at Time T after Pumping Stopped with Base 10?

Depression Head in Well at Time T after Pumping Stopped with Base 10 calculator uses Depression head = Depression head/10^((Specific Capacity*Time)/2.303) to calculate the Depression head, The Depression Head in Well at Time T after Pumping Stopped with Base 10 calculates value of depression head in well at time T when we have prior information of other parameters used. Depression head is denoted by h2 symbol.

How to calculate Depression Head in Well at Time T after Pumping Stopped with Base 10 using this online calculator? To use this online calculator for Depression Head in Well at Time T after Pumping Stopped with Base 10, enter Depression head (h1), Specific Capacity (KA) & Time (t) and hit the calculate button. Here is how the Depression Head in Well at Time T after Pumping Stopped with Base 10 calculation can be explained with given input values -> 0.001008 = 3/10^((0.000555555555555556*14400)/2.303).

FAQ

What is Depression Head in Well at Time T after Pumping Stopped with Base 10?
The Depression Head in Well at Time T after Pumping Stopped with Base 10 calculates value of depression head in well at time T when we have prior information of other parameters used and is represented as h2 = h1/10^((KA*t)/2.303) or Depression head = Depression head/10^((Specific Capacity*Time)/2.303). Depression head in the well when pumping stopped, Specific Capacity of an open well & Time can be defined as the ongoing and continuous sequence of events that occur in succession, from the past through the present to the future.
How to calculate Depression Head in Well at Time T after Pumping Stopped with Base 10?
The Depression Head in Well at Time T after Pumping Stopped with Base 10 calculates value of depression head in well at time T when we have prior information of other parameters used is calculated using Depression head = Depression head/10^((Specific Capacity*Time)/2.303). To calculate Depression Head in Well at Time T after Pumping Stopped with Base 10, you need Depression head (h1), Specific Capacity (KA) & Time (t). With our tool, you need to enter the respective value for Depression head, Specific Capacity & Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depression head?
In this formula, Depression head uses Depression head, Specific Capacity & Time. We can use 10 other way(s) to calculate the same, which is/are as follows -
  • Depression head = Depression head/exp(Specific Capacity*Time)
  • Depression head = Depression head/10^((0.25*Time/3600))
  • Depression head = Depression head/10^((0.25*Time/3600)/2.303)
  • Depression head = Depression head/10^((0.5/2.303)*Time/3600)
  • Depression head = (Depression head/10^(((0.5)*(Time/3600)/2.303)))
  • Depression head = (Depression head/10^((1/2.303)*(Time/3600)))
  • Depression head = Depression head/10^((1*Time/3600)/2.303)
  • Depression head = Depression head/(exp((Constant*Time)/Cross-Sectional Area))
  • Depression head = Depression head/(10^((Constant*Time)/(Cross-Sectional Area*2.303)))
  • Depression head = Depression head/(10^((Discharge*Time/3600)/(Cross-Sectional Area*Constant Depression Head*2.303)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!