Depth at Gauging Station Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2
hG = hcsf+Hc*(Q)+Q2^2
This formula uses 5 Variables
Variables Used
Depth at Gauging Station - (Measured in Meter) - Depth at Gauging Station where the hydraulics of a downstream control and a gauging station are considered.
Cease-to-Flow Depth - (Measured in Meter) - Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered.
Head at Control - (Measured in Meter) - Head at Control shown as a function of discharge Q.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.
Terms of Order - Terms of Order give the head loss between the gauging station and the control.
STEP 1: Convert Input(s) to Base Unit
Cease-to-Flow Depth: 0.1 Meter --> 0.1 Meter No Conversion Required
Head at Control: 0.05 Meter --> 0.05 Meter No Conversion Required
Discharge: 3 Cubic Meter per Second --> 3 Cubic Meter per Second No Conversion Required
Terms of Order: 2.4 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
hG = hcsf+Hc*(Q)+Q2^2 --> 0.1+0.05*(3)+2.4^2
Evaluating ... ...
hG = 6.01
STEP 3: Convert Result to Output's Unit
6.01 Meter --> No Conversion Required
FINAL ANSWER
6.01 Meter <-- Depth at Gauging Station
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

4 Low Flow Calculators

Head at Control given Depth at Gauging Station
Go Head at Control = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/(Discharge)
Cease to Flow Depth given Depth at Gauging Station
Go Cease-to-Flow Depth = Depth at Gauging Station-Head at Control*(Discharge)-Terms of Order^2
Discharge given Depth at Gauging Station
Go Discharge = (Depth at Gauging Station-Cease-to-Flow Depth-Terms of Order^2)/Head at Control
Depth at Gauging Station
Go Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2

Depth at Gauging Station Formula

Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2
hG = hcsf+Hc*(Q)+Q2^2

What is Gauging Station?

A stream gauge, stream gage or gauging station is a location used by hydrologists or environmental scientists to monitor and test terrestrial bodies of water.

How to Calculate Depth at Gauging Station?

Depth at Gauging Station calculator uses Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2 to calculate the Depth at Gauging Station, The Depth at gauging station formula is defined as the hydraulics of a downstream control and a gauging station are considered. Depth at Gauging Station is denoted by hG symbol.

How to calculate Depth at Gauging Station using this online calculator? To use this online calculator for Depth at Gauging Station, enter Cease-to-Flow Depth (hcsf), Head at Control (Hc), Discharge (Q) & Terms of Order (Q2) and hit the calculate button. Here is how the Depth at Gauging Station calculation can be explained with given input values -> 6.01 = 0.1+0.05*(3)+2.4^2.

FAQ

What is Depth at Gauging Station?
The Depth at gauging station formula is defined as the hydraulics of a downstream control and a gauging station are considered and is represented as hG = hcsf+Hc*(Q)+Q2^2 or Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2. Cease-to-Flow Depth when hydraulics of a downstream control and a gauging station are considered, Head at Control shown as a function of discharge Q, Discharge is the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material & Terms of Order give the head loss between the gauging station and the control.
How to calculate Depth at Gauging Station?
The Depth at gauging station formula is defined as the hydraulics of a downstream control and a gauging station are considered is calculated using Depth at Gauging Station = Cease-to-Flow Depth+Head at Control*(Discharge)+Terms of Order^2. To calculate Depth at Gauging Station, you need Cease-to-Flow Depth (hcsf), Head at Control (Hc), Discharge (Q) & Terms of Order (Q2). With our tool, you need to enter the respective value for Cease-to-Flow Depth, Head at Control, Discharge & Terms of Order and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!