Depth at which Reservoir is Completely Filled up Solution

STEP 0: Pre-Calculation Summary
Formula Used
Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation)
ho = H-((Vs-Vo)/Ao)
This formula uses 5 Variables
Variables Used
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.
Difference in the Elevation (FRL and Original bed) - (Measured in Meter) - Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).
Volume of Sediment to be Distributed - (Measured in Cubic Meter) - Volume of Sediment to be Distributed is the volume of sediment in a reservoir and the volume of sediment filling up the conical portion of the reservoir up to the original filling depth.
Volume of Sediment - (Measured in Cubic Meter) - Volume of Sediment is the transported volume sediment between old zero and new zero bed level.
Area at the New Zero Elevation - (Measured in Square Meter) - Area at the New Zero Elevation of the reservoir.
STEP 1: Convert Input(s) to Base Unit
Difference in the Elevation (FRL and Original bed): 11 Meter --> 11 Meter No Conversion Required
Volume of Sediment to be Distributed: 455 Cubic Meter --> 455 Cubic Meter No Conversion Required
Volume of Sediment: 5 Cubic Meter --> 5 Cubic Meter No Conversion Required
Area at the New Zero Elevation: 50 Square Meter --> 50 Square Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ho = H-((Vs-Vo)/Ao) --> 11-((455-5)/50)
Evaluating ... ...
ho = 2
STEP 3: Convert Result to Output's Unit
2 Meter --> No Conversion Required
FINAL ANSWER
2 Meter <-- Height above Bed
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

5 Area Increment Method Calculators

Sediment Volume between Old Zero and New Zero Bed Level
Go Volume of Sediment = Volume of Sediment to be Distributed-(Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed))
Depth at which Reservoir is Completely Filled up
Go Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation)
Original Reservoir Area at New Zero Level
Go Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the Elevation (FRL and Original bed)-Height above Bed)
Sediment Volume to be Distributed in Reservoir
Go Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment
Incremental Sediment Volume
Go Volume of Sediment = (Area at the New Zero Elevation*Change in Head Between the Points)

Depth at which Reservoir is Completely Filled up Formula

Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation)
ho = H-((Vs-Vo)/Ao)

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Depth at which Reservoir is Completely Filled up?

Depth at which Reservoir is Completely Filled up calculator uses Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation) to calculate the Height above Bed, The Depth at which Reservoir is Completely Filled up formula is defined as the height at which the sediments fill up the reservoir at the bottom, thus forming a new datum line of the reservoir. Height above Bed is denoted by ho symbol.

How to calculate Depth at which Reservoir is Completely Filled up using this online calculator? To use this online calculator for Depth at which Reservoir is Completely Filled up, enter Difference in the Elevation (FRL and Original bed) (H), Volume of Sediment to be Distributed (Vs), Volume of Sediment (Vo) & Area at the New Zero Elevation (Ao) and hit the calculate button. Here is how the Depth at which Reservoir is Completely Filled up calculation can be explained with given input values -> 2 = 11-((455-5)/50).

FAQ

What is Depth at which Reservoir is Completely Filled up?
The Depth at which Reservoir is Completely Filled up formula is defined as the height at which the sediments fill up the reservoir at the bottom, thus forming a new datum line of the reservoir and is represented as ho = H-((Vs-Vo)/Ao) or Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation). Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL), Volume of Sediment to be Distributed is the volume of sediment in a reservoir and the volume of sediment filling up the conical portion of the reservoir up to the original filling depth, Volume of Sediment is the transported volume sediment between old zero and new zero bed level & Area at the New Zero Elevation of the reservoir.
How to calculate Depth at which Reservoir is Completely Filled up?
The Depth at which Reservoir is Completely Filled up formula is defined as the height at which the sediments fill up the reservoir at the bottom, thus forming a new datum line of the reservoir is calculated using Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation). To calculate Depth at which Reservoir is Completely Filled up, you need Difference in the Elevation (FRL and Original bed) (H), Volume of Sediment to be Distributed (Vs), Volume of Sediment (Vo) & Area at the New Zero Elevation (Ao). With our tool, you need to enter the respective value for Difference in the Elevation (FRL and Original bed), Volume of Sediment to be Distributed, Volume of Sediment & Area at the New Zero Elevation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!