Depth of Water at Point 1 given Discharge from Two Wells with Base 10 Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics))
h1 = sqrt(h2^2-(Q*log((r2/r1),10))/(1.36*KWH))
This formula uses 2 Functions, 6 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
log - Logarithmic function is an inverse function to exponentiation., log(Base, Number)
Variables Used
Depth of Water 1 - (Measured in Meter) - Depth of water 1 is the depth of water in the 1st considered well.
Depth of Water 2 - (Measured in Meter) - Depth of water 2 means the depth of the water in 2nd well.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Radial Distance at Observation Well 2 - (Measured in Meter) - Radial Distance at Observation Well 2 is the value of radial distance from well 2 when we have prior information of other parameters used.
Radial Distance at Observation Well 1 - (Measured in Meter) - Radial Distance at Observation Well 1 is the value of radial distance from well 1 when we have prior information of other parameters used.
Coefficient of Permeability in Well Hydraulics - (Measured in Meter per Second) - Coefficient of Permeability in Well Hydraulics of soil in well hydraulics describes how easily a liquid will move through the soil.
STEP 1: Convert Input(s) to Base Unit
Depth of Water 2: 17.8644 Meter --> 17.8644 Meter No Conversion Required
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Radial Distance at Observation Well 2: 10 Meter --> 10 Meter No Conversion Required
Radial Distance at Observation Well 1: 1.07 Meter --> 1.07 Meter No Conversion Required
Coefficient of Permeability in Well Hydraulics: 10 Centimeter per Second --> 0.1 Meter per Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h1 = sqrt(h2^2-(Q*log((r2/r1),10))/(1.36*KWH)) --> sqrt(17.8644^2-(1.01*log((10/1.07),10))/(1.36*0.1))
Evaluating ... ...
h1 = 17.6489516072321
STEP 3: Convert Result to Output's Unit
17.6489516072321 Meter --> No Conversion Required
FINAL ANSWER
17.6489516072321 17.64895 Meter <-- Depth of Water 1
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

6 Depth ot Water in Well Calculators

Depth of Water at Point 1 given Discharge of Two Wells under Consideration
Go Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),e))/(pi*Coefficient of Permeability in Well Hydraulics))
Depth of Water at Point 2 given Discharge of Two Wells under Consideration
Go Depth of Water 2 = sqrt(Depth of Water 1^2+(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),e))/(pi*Coefficient of Permeability in Well Hydraulics))
Depth of Water in Well given Discharge in Unconfined Aquifer
Go Depth of Water = sqrt(Thickness of Unconfined Aquifer^2-(Discharge*log((Radius of Influence/Radius of well),e))/(pi*Coefficient of Permeability in Well Hydraulics))
Depth of Water at Point 1 given Discharge from Two Wells with Base 10
Go Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics))
Depth of Water at Point 2 given Discharge from Two Wells with Base 10
Go Depth of Water 2 = sqrt(Depth of Water 1^2+(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics))
Depth of Water in Well given Drawdown Value measured at Well
Go Depth of Water = Thickness of Unconfined Aquifer-Total Drawdown in Well

Depth of Water at Point 1 given Discharge from Two Wells with Base 10 Formula

Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics))
h1 = sqrt(h2^2-(Q*log((r2/r1),10))/(1.36*KWH))

What is aquifer ?

An aquifer is an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials (gravel, sand, or silt). Groundwater can be extracted using a water well.

How to Calculate Depth of Water at Point 1 given Discharge from Two Wells with Base 10?

Depth of Water at Point 1 given Discharge from Two Wells with Base 10 calculator uses Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics)) to calculate the Depth of Water 1, Depth of Water at Point 1 given Discharge from Two Wells with Base 10 calculates value of depth of water at point 1 when we have prior information of other parameters used. Depth of Water 1 is denoted by h1 symbol.

How to calculate Depth of Water at Point 1 given Discharge from Two Wells with Base 10 using this online calculator? To use this online calculator for Depth of Water at Point 1 given Discharge from Two Wells with Base 10, enter Depth of Water 2 (h2), Discharge (Q), Radial Distance at Observation Well 2 (r2), Radial Distance at Observation Well 1 (r1) & Coefficient of Permeability in Well Hydraulics (KWH) and hit the calculate button. Here is how the Depth of Water at Point 1 given Discharge from Two Wells with Base 10 calculation can be explained with given input values -> 17.64895 = sqrt(17.8644^2-(1.01*log((10/1.07),10))/(1.36*0.1)).

FAQ

What is Depth of Water at Point 1 given Discharge from Two Wells with Base 10?
Depth of Water at Point 1 given Discharge from Two Wells with Base 10 calculates value of depth of water at point 1 when we have prior information of other parameters used and is represented as h1 = sqrt(h2^2-(Q*log((r2/r1),10))/(1.36*KWH)) or Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics)). Depth of water 2 means the depth of the water in 2nd well, Discharge is the rate of flow of a liquid, Radial Distance at Observation Well 2 is the value of radial distance from well 2 when we have prior information of other parameters used, Radial Distance at Observation Well 1 is the value of radial distance from well 1 when we have prior information of other parameters used & Coefficient of Permeability in Well Hydraulics of soil in well hydraulics describes how easily a liquid will move through the soil.
How to calculate Depth of Water at Point 1 given Discharge from Two Wells with Base 10?
Depth of Water at Point 1 given Discharge from Two Wells with Base 10 calculates value of depth of water at point 1 when we have prior information of other parameters used is calculated using Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics)). To calculate Depth of Water at Point 1 given Discharge from Two Wells with Base 10, you need Depth of Water 2 (h2), Discharge (Q), Radial Distance at Observation Well 2 (r2), Radial Distance at Observation Well 1 (r1) & Coefficient of Permeability in Well Hydraulics (KWH). With our tool, you need to enter the respective value for Depth of Water 2, Discharge, Radial Distance at Observation Well 2, Radial Distance at Observation Well 1 & Coefficient of Permeability in Well Hydraulics and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depth of Water 1?
In this formula, Depth of Water 1 uses Depth of Water 2, Discharge, Radial Distance at Observation Well 2, Radial Distance at Observation Well 1 & Coefficient of Permeability in Well Hydraulics. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),e))/(pi*Coefficient of Permeability in Well Hydraulics))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!