Diameter of rivet given margin Solution

STEP 0: Pre-Calculation Summary
Formula Used
Rivet Diameter = Margin of Rivet/1.5
Drivet = m/1.5
This formula uses 2 Variables
Variables Used
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Margin of Rivet - (Measured in Meter) - Margin of Rivet is defined as the distance between the edge of the plate to the centreline of rivets in the nearest row.
STEP 1: Convert Input(s) to Base Unit
Margin of Rivet: 27 Millimeter --> 0.027 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Drivet = m/1.5 --> 0.027/1.5
Evaluating ... ...
Drivet = 0.018
STEP 3: Convert Result to Output's Unit
0.018 Meter -->18 Millimeter (Check conversion here)
FINAL ANSWER
18 Millimeter <-- Rivet Diameter
(Calculation completed in 00.004 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

2 Failure Due To Tearing Of The Plate Between The Rivet Hole And Edge Calculators

Margin given diameter of rivet
Go Margin of Rivet = 1.5*Rivet Diameter
Diameter of rivet given margin
Go Rivet Diameter = Margin of Rivet/1.5

Diameter of rivet given margin Formula

Rivet Diameter = Margin of Rivet/1.5
Drivet = m/1.5

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a top head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Diameter of rivet given margin?

Diameter of rivet given margin calculator uses Rivet Diameter = Margin of Rivet/1.5 to calculate the Rivet Diameter, The Diameter of rivet given margin formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by Drivet symbol.

How to calculate Diameter of rivet given margin using this online calculator? To use this online calculator for Diameter of rivet given margin, enter Margin of Rivet (m) and hit the calculate button. Here is how the Diameter of rivet given margin calculation can be explained with given input values -> 18000 = 0.027/1.5.

FAQ

What is Diameter of rivet given margin?
The Diameter of rivet given margin formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter and is represented as Drivet = m/1.5 or Rivet Diameter = Margin of Rivet/1.5. Margin of Rivet is defined as the distance between the edge of the plate to the centreline of rivets in the nearest row.
How to calculate Diameter of rivet given margin?
The Diameter of rivet given margin formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter is calculated using Rivet Diameter = Margin of Rivet/1.5. To calculate Diameter of rivet given margin, you need Margin of Rivet (m). With our tool, you need to enter the respective value for Margin of Rivet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!