Diameter of rivet given safe load for butt joint with double cover plates and double shear Solution

STEP 0: Pre-Calculation Summary
Formula Used
Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
Drivet = sqrt(Psafe/(2*(pi/4)*Tsafe))
This formula uses 1 Constants, 1 Functions, 3 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Safe load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Safe shear stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.
STEP 1: Convert Input(s) to Base Unit
Safe load Joint: 4.5 Kilonewton --> 4500 Newton (Check conversion here)
Safe shear stress: 0.24 Megapascal --> 240000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Drivet = sqrt(Psafe/(2*(pi/4)*Tsafe)) --> sqrt(4500/(2*(pi/4)*240000))
Evaluating ... ...
Drivet = 0.109254843059208
STEP 3: Convert Result to Output's Unit
0.109254843059208 Meter -->109.254843059208 Millimeter (Check conversion here)
FINAL ANSWER
109.254843059208 109.2548 Millimeter <-- Rivet Diameter
(Calculation completed in 00.020 seconds)

Credits

Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

22 Failure Due To Shearing Of Rivet Calculators

Diameter of rivet given strength of joint for butt joint with double cover plates
Go Rivet Diameter = sqrt(Safe load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe shear stress))
Diameter of rivet given strength of joint for lap joint with single shear
Go Rivet Diameter = sqrt(Safe load Joint/(Number of Rivets Per Pitch*1*(pi/4)*Safe shear stress))
Number of rivets per pitch length given strength of joint for butt joint with double cover plates
Go Number of Rivets Per Pitch = Strength of joint/((2*(pi/4)*(Rivet Diameter^2)*Safe shear stress))
Number of rivets covered per pitch length given strength of joint for single shear lap joint
Go Number of Rivets Per Pitch = Strength of joint/((1*(pi/4)*(Rivet Diameter^2)*Safe shear stress))
Strength of Joint per Pitch Length using Butt Joint with Double Cover Plates
Go Strength of joint = Number of Rivets Per Pitch*(2*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Strength of Joint per Pitch Length using Lap Joint with Single Shear
Go Strength of joint = Number of Rivets Per Pitch*(1*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Diameter of rivet given safe load for butt joint with double cover plates and double shear
Go Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
Diameter of rivets given safe load for triple-rivet butt joint with single cover plates
Go Rivet Diameter = sqrt(Safe load Joint/(3*(pi/4)*Safe shear stress))
Diameter of rivet given safe load for single rivet butt joint with single cover plates
Go Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
Diameter of rivet given safe load for double rivet butt joint with single cover plates
Go Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
Diameter of rivet given safe load per pitch length in single rivet lap joint
Go Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
Diameter of rivet given safe load per pitch length in double rivet lap joint
Go Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
Diameter of rivet given safe load per pitch length in triple-rivet lap joint
Go Rivet Diameter = sqrt(Safe load Joint/(3*(pi/4)*Safe shear stress))
Diameter of rivet given safe load for lap joint for single shear
Go Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear
Go Safe load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe Load per Pitch Length using Single Rivet Butt Joint with Single Cover Plates
Go Safe load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates
Go Safe load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe Load per Pitch Length using Triple-Rivet Butt Joint with Single Cover Plates
Go Safe load Joint = (3*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe load rivet can withstand for lap joint of single shear
Go Safe load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe Load per Pitch Length using Single Rivet Lap Joint
Go Safe load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe Load per Pitch Length using Double Rivet Lap Joint
Go Safe load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe shear stress)
Safe load per pitch length given triple-rivet lap joint
Go Safe load Joint = (3*(pi/4)*(Rivet Diameter^2)*Safe shear stress)

Diameter of rivet given safe load for butt joint with double cover plates and double shear Formula

Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
Drivet = sqrt(Psafe/(2*(pi/4)*Tsafe))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Diameter of rivet given safe load for butt joint with double cover plates and double shear?

Diameter of rivet given safe load for butt joint with double cover plates and double shear calculator uses Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress)) to calculate the Rivet Diameter, The Diameter of rivet given safe load for butt joint with double cover plates and double shear formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter. Rivet Diameter is denoted by Drivet symbol.

How to calculate Diameter of rivet given safe load for butt joint with double cover plates and double shear using this online calculator? To use this online calculator for Diameter of rivet given safe load for butt joint with double cover plates and double shear, enter Safe load Joint (Psafe) & Safe shear stress (Tsafe) and hit the calculate button. Here is how the Diameter of rivet given safe load for butt joint with double cover plates and double shear calculation can be explained with given input values -> 109254.8 = sqrt(4500/(2*(pi/4)*240000)).

FAQ

What is Diameter of rivet given safe load for butt joint with double cover plates and double shear?
The Diameter of rivet given safe load for butt joint with double cover plates and double shear formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter and is represented as Drivet = sqrt(Psafe/(2*(pi/4)*Tsafe)) or Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress)). Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device & Safe shear stress is always less than the yield shear stress.
How to calculate Diameter of rivet given safe load for butt joint with double cover plates and double shear?
The Diameter of rivet given safe load for butt joint with double cover plates and double shear formula is defined as a chord that runs through the center point of the rivet. It is the longest possible chord of any rivet. The center of a rivet is the midpoint of its diameter is calculated using Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress)). To calculate Diameter of rivet given safe load for butt joint with double cover plates and double shear, you need Safe load Joint (Psafe) & Safe shear stress (Tsafe). With our tool, you need to enter the respective value for Safe load Joint & Safe shear stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Rivet Diameter?
In this formula, Rivet Diameter uses Safe load Joint & Safe shear stress. We can use 9 other way(s) to calculate the same, which is/are as follows -
  • Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(3*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(2*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(3*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(Number of Rivets Per Pitch*2*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(1*(pi/4)*Safe shear stress))
  • Rivet Diameter = sqrt(Safe load Joint/(Number of Rivets Per Pitch*1*(pi/4)*Safe shear stress))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!