Force Exerted by Jet in direction of Flow of Jet Solution

STEP 0: Pre-Calculation Summary
Formula Used
Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta))
Fs = ((γf*AJet*Vabsolute*(Vabsolute-v))/G)*(1+cos(θ))
This formula uses 1 Functions, 7 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Force by Stationary Plate - (Measured in Newton) - Force by Stationary Plate on is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Specific Weight of Liquid - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.
Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Absolute Velocity of Issuing Jet - (Measured in Meter per Second) - Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller.
Velocity of Jet - (Measured in Meter per Second) - Velocity of Jet can be described as the movement of the plate in meters per second.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Theta - (Measured in Radian) - Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
STEP 1: Convert Input(s) to Base Unit
Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Cross Sectional Area of Jet: 1.2 Square Meter --> 1.2 Square Meter No Conversion Required
Absolute Velocity of Issuing Jet: 10.1 Meter per Second --> 10.1 Meter per Second No Conversion Required
Velocity of Jet: 9.69 Meter per Second --> 9.69 Meter per Second No Conversion Required
Specific Gravity of Fluid: 10 --> No Conversion Required
Theta: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Fs = ((γf*AJet*Vabsolute*(Vabsolute-v))/G)*(1+cos(θ)) --> ((9.81*1.2*10.1*(10.1-9.69))/10)*(1+cos(0.5235987755982))
Evaluating ... ...
Fs = 9.09647302119241
STEP 3: Convert Result to Output's Unit
9.09647302119241 Newton --> No Conversion Required
FINAL ANSWER
9.09647302119241 9.096473 Newton <-- Force by Stationary Plate
(Calculation completed in 00.004 seconds)

Credits

Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

4 Force Exerted by Jet Calculators

Force Exerted by jet with relative velocity
Go Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+Numerical Coefficient a*cos(Theta))
Force Exerted by Jet in direction of Flow of Jet
Go Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta))
Force Exerted by Jet in Direction of Flow of Incoming Jet with angle at 90
Go Thrust Force = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet)^2)/Specific Gravity of Fluid)
Force Exerted by Jet in Direction of Flow of Incoming Jet with angle zero
Go Thrust Force = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet)^2)/Specific Gravity of Fluid)

Force Exerted by Jet in direction of Flow of Jet Formula

Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta))
Fs = ((γf*AJet*Vabsolute*(Vabsolute-v))/G)*(1+cos(θ))

What is meant by Velocity?

The Velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time.

How to Calculate Force Exerted by Jet in direction of Flow of Jet?

Force Exerted by Jet in direction of Flow of Jet calculator uses Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta)) to calculate the Force by Stationary Plate, The Force Exerted by Jet in direction of Flow of Jet is defined as the force induced by the fluid on the stationary plate of jet. Force by Stationary Plate is denoted by Fs symbol.

How to calculate Force Exerted by Jet in direction of Flow of Jet using this online calculator? To use this online calculator for Force Exerted by Jet in direction of Flow of Jet, enter Specific Weight of Liquid f), Cross Sectional Area of Jet (AJet), Absolute Velocity of Issuing Jet (Vabsolute), Velocity of Jet (v), Specific Gravity of Fluid (G) & Theta (θ) and hit the calculate button. Here is how the Force Exerted by Jet in direction of Flow of Jet calculation can be explained with given input values -> 6.809724 = ((9810*1.2*10.1*(10.1-9.69))/10)*(1+cos(0.5235987755982)).

FAQ

What is Force Exerted by Jet in direction of Flow of Jet?
The Force Exerted by Jet in direction of Flow of Jet is defined as the force induced by the fluid on the stationary plate of jet and is represented as Fs = ((γf*AJet*Vabsolute*(Vabsolute-v))/G)*(1+cos(θ)) or Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta)). Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid, Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Absolute Velocity of Issuing Jet is actual velocity of jet used in propeller, Velocity of Jet can be described as the movement of the plate in meters per second, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid & Theta is an angle that can be defined as the figure formed by two rays meeting at a common endpoint.
How to calculate Force Exerted by Jet in direction of Flow of Jet?
The Force Exerted by Jet in direction of Flow of Jet is defined as the force induced by the fluid on the stationary plate of jet is calculated using Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+cos(Theta)). To calculate Force Exerted by Jet in direction of Flow of Jet, you need Specific Weight of Liquid f), Cross Sectional Area of Jet (AJet), Absolute Velocity of Issuing Jet (Vabsolute), Velocity of Jet (v), Specific Gravity of Fluid (G) & Theta (θ). With our tool, you need to enter the respective value for Specific Weight of Liquid, Cross Sectional Area of Jet, Absolute Velocity of Issuing Jet, Velocity of Jet, Specific Gravity of Fluid & Theta and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Force by Stationary Plate?
In this formula, Force by Stationary Plate uses Specific Weight of Liquid, Cross Sectional Area of Jet, Absolute Velocity of Issuing Jet, Velocity of Jet, Specific Gravity of Fluid & Theta. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Force by Stationary Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Absolute Velocity of Issuing Jet*(Absolute Velocity of Issuing Jet-Velocity of Jet))/Specific Gravity of Fluid)*(1+Numerical Coefficient a*cos(Theta))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!