Force Exerted by Jet Parallel to Direction of Jet Normal to Plate Solution

STEP 0: Pre-Calculation Summary
Formula Used
Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2
FX = ((γf*AJet*vjet^2)/[g])*(sin(∠D))^2
This formula uses 1 Constants, 1 Functions, 5 Variables
Constants Used
[g] - Gravitational acceleration on Earth Value Taken As 9.80665
Functions Used
sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
Variables Used
Force by Jet Normal to Plate in X - (Measured in Newton) - Force by Jet Normal to Plate in X is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Specific Weight of Liquid - (Measured in Newton per Cubic Meter) - Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.
Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Fluid Jet Velocity - (Measured in Meter per Second) - Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.
Angle between Jet and Plate - (Measured in Radian) - Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.
STEP 1: Convert Input(s) to Base Unit
Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9810 Newton per Cubic Meter (Check conversion here)
Cross Sectional Area of Jet: 1.2 Square Meter --> 1.2 Square Meter No Conversion Required
Fluid Jet Velocity: 12 Meter per Second --> 12 Meter per Second No Conversion Required
Angle between Jet and Plate: 11 Degree --> 0.19198621771934 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
FX = ((γf*AJet*vjet^2)/[g])*(sin(∠D))^2 --> ((9810*1.2*12^2)/[g])*(sin(0.19198621771934))^2
Evaluating ... ...
FX = 6293.46410964407
STEP 3: Convert Result to Output's Unit
6293.46410964407 Newton -->6.29346410964407 Kilonewton (Check conversion here)
FINAL ANSWER
6.29346410964407 6.293464 Kilonewton <-- Force by Jet Normal to Plate in X
(Calculation completed in 00.004 seconds)

Credits

Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

12 Flat Plate Inclined at an Angle to the Jet Calculators

Velocity of Fluid given Thrust Normal to Jet
Go Fluid Jet Velocity = sqrt((Force by Jet Normal to Plate in Y*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet*(sin(Angle between Jet and Plate))*cos(Angle between Jet and Plate)))
Force Exerted by Jet Normal to Direction of Jet Normal to Plate
Go Force by Jet Normal to Plate in Y = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*sin(Angle between Jet and Plate)*cos(Angle between Jet and Plate)
Cross Sectional Area of Jet for given Dynamic Thrust Normal to Direction of Jet
Go Cross Sectional Area of Jet = (Force by Jet Normal to Plate in Y*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2*sin(Angle between Jet and Plate)*cos(Angle between Jet and Plate))
Velocity of Fluid given Thrust Exerted Normal to Plate
Go Fluid Jet Velocity = sqrt((Force Exerted by Jet Normal to Plate*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet*(sin(Angle between Jet and Plate))))
Velocity of Fluid given Thrust Parallel to Jet
Go Fluid Jet Velocity = sqrt((Force by Jet Normal to Plate in X*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet*(sin(Angle between Jet and Plate))^2))
Force Exerted by Jet in Direction Normal to Plate
Go Force Exerted by Jet Normal to Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Fluid Jet Velocity^2))/ ([g]))*sin(Angle between Jet and Plate)
Force Exerted by Jet Parallel to Direction of Jet Normal to Plate
Go Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2
Cross Sectional Area of Jet for given Thrust Exerted in Direction of Normal to Plate
Go Cross Sectional Area of Jet = (Force Exerted by Jet Normal to Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2*(sin(Angle between Jet and Plate)))
Cross Sectional Area of Jet for given Dynamic Thrust Parallel to Direction of Jet
Go Cross Sectional Area of Jet = (Force by Jet Normal to Plate in X*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2*(sin(Angle between Jet and Plate))^2)
Discharge Flowing in Direction Parallel to Plate
Go Discharge in any Direction = (Discharge by Jet/2)*(1-cos(Angle between Jet and Plate))
Discharge Flowing in Direction Normal to Plate
Go Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate))
Discharge Flowing by Jet
Go Discharge by Jet = Discharge in any Direction+Discharge in any Direction

Force Exerted by Jet Parallel to Direction of Jet Normal to Plate Formula

Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2
FX = ((γf*AJet*vjet^2)/[g])*(sin(∠D))^2

What is meant by Force by Jet Normal to Plate in X?

Force by Jet Normal to Plate in X is any interaction that, when unopposed, will change the motion of an object in direction Parallel to Direction of Jet Normal to Plate. In other words, a force can cause an object with mass to change its velocity.

What is meant by Velocity?

The Velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time.

How to Calculate Force Exerted by Jet Parallel to Direction of Jet Normal to Plate?

Force Exerted by Jet Parallel to Direction of Jet Normal to Plate calculator uses Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2 to calculate the Force by Jet Normal to Plate in X, Force Exerted by Jet Parallel to Direction of Jet Normal to Plate is defined as the force exerted by the jet in the direction parallel to the plate. Force by Jet Normal to Plate in X is denoted by FX symbol.

How to calculate Force Exerted by Jet Parallel to Direction of Jet Normal to Plate using this online calculator? To use this online calculator for Force Exerted by Jet Parallel to Direction of Jet Normal to Plate, enter Specific Weight of Liquid f), Cross Sectional Area of Jet (AJet), Fluid Jet Velocity (vjet) & Angle between Jet and Plate (∠D) and hit the calculate button. Here is how the Force Exerted by Jet Parallel to Direction of Jet Normal to Plate calculation can be explained with given input values -> 0.0075 = ((9810*1.2*12^2)/[g])*(sin(0.19198621771934))^2.

FAQ

What is Force Exerted by Jet Parallel to Direction of Jet Normal to Plate?
Force Exerted by Jet Parallel to Direction of Jet Normal to Plate is defined as the force exerted by the jet in the direction parallel to the plate and is represented as FX = ((γf*AJet*vjet^2)/[g])*(sin(∠D))^2 or Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2. Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid, Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point, Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area & Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.
How to calculate Force Exerted by Jet Parallel to Direction of Jet Normal to Plate?
Force Exerted by Jet Parallel to Direction of Jet Normal to Plate is defined as the force exerted by the jet in the direction parallel to the plate is calculated using Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2. To calculate Force Exerted by Jet Parallel to Direction of Jet Normal to Plate, you need Specific Weight of Liquid f), Cross Sectional Area of Jet (AJet), Fluid Jet Velocity (vjet) & Angle between Jet and Plate (∠D). With our tool, you need to enter the respective value for Specific Weight of Liquid, Cross Sectional Area of Jet, Fluid Jet Velocity & Angle between Jet and Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!