## Fundamental Output Phase Voltage of Cyclo Converter Solution

STEP 0: Pre-Calculation Summary
Formula Used
Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width)
Vout = Vph*(m/pi)*sin(pi/m)
This formula uses 1 Constants, 1 Functions, 3 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Functions Used
sin - Trigonometric sine function, sin(Angle)
Variables Used
Output Voltage - (Measured in Volt) - Output Voltage of a cycloconverter is a variable-frequency, variable-amplitude waveform that is controlled by the firing angles of the thyristors in the converter circuit.
Phase Voltage - (Measured in Volt) - Phase Voltage of a cycloconverter is the voltage between any two of the three output terminals of a three-phase cycloconverter.
Pulse Width - Pulse Width control (PWM) cycloconverters are a type of cycloconverter that uses pulse-width modulation (PWM) to control the output voltage and frequency of the AC motor.
STEP 1: Convert Input(s) to Base Unit
Phase Voltage: 5.65 Volt --> 5.65 Volt No Conversion Required
Pulse Width: 3 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vout = Vph*(m/pi)*sin(pi/m) --> 5.65*(3/pi)*sin(pi/3)
Evaluating ... ...
Vout = 4.67251238869969
STEP 3: Convert Result to Output's Unit
4.67251238869969 Volt --> No Conversion Required
4.67251238869969 4.672512 Volt <-- Output Voltage
(Calculation completed in 00.004 seconds)
You are here -
Home »

## Credits

Created by Mohamed Fazil V
Acharya institute of technology (AIT), Banglore
Mohamed Fazil V has created this Calculator and 50+ more calculators!
Verified by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has verified this Calculator and 500+ more calculators!

## < 5 Cyclo Converters Calculators

RMS Value of Output Voltage of Cyclo Converter
Output Voltage = Maximum Output/sqrt(2)*(1/pi*(pi-Firing Angle+sin(2*Firing Angle)/2))^(1/2)
Fundamental Output Phase Voltage of Cyclo Converter
Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width)
Instantaneous Phase Voltage of Cyclo Converter
Instantaneous Voltage = sqrt(2)*Phase Voltage*cos(Angular Frequency*Time period)
Maximum Output DC Voltage in Cyclo Converter
Maximum Output = Voltage Reduction Factor*Output Voltage
Output Frequency in Cyclo Converter
Output Frequency = 1/4*Supply Frequency

## Fundamental Output Phase Voltage of Cyclo Converter Formula

Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width)
Vout = Vph*(m/pi)*sin(pi/m)

## What Fundamental Output Phase voltage of Cyclo Converter ?

A cycloconverter is a type of power electronic converter that converts AC power at one frequency to AC power at another frequency. The output waveform of a cycloconverter is typically characterized by a series of controlled, variable-width output pulses. The fundamental output frequency of a cycloconverter is determined by the firing angle and the input frequency. In a cycloconverter, the output voltage waveform is not a simple sinusoidal waveform like the input AC waveform. It generally consists of a series of harmonics. The fundamental frequency of the output waveform is the frequency at which the major component of the output voltage exists.

## How to Calculate Fundamental Output Phase Voltage of Cyclo Converter?

Fundamental Output Phase Voltage of Cyclo Converter calculator uses Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width) to calculate the Output Voltage, Fundamental Output Phase voltage of Cyclo Converter of the positive half-cycle of the output voltage waveform. It is a crucial parameter that determines the effective voltage delivered to the load and influences the overall performance of the cycloconverter system. the fundamental output phase voltage is the same for all three phases. However, the output voltage waveform may not be perfectly sinusoidal due to the inherent nature of the cycloconverter operation. This can lead to the presence of harmonics in the output voltage, which can affect the performance of the load. Output Voltage is denoted by Vout symbol.

How to calculate Fundamental Output Phase Voltage of Cyclo Converter using this online calculator? To use this online calculator for Fundamental Output Phase Voltage of Cyclo Converter, enter Phase Voltage (Vph) & Pulse Width (m) and hit the calculate button. Here is how the Fundamental Output Phase Voltage of Cyclo Converter calculation can be explained with given input values -> 4.672512 = 5.65*(3/pi)*sin(pi/3).

### FAQ

What is Fundamental Output Phase Voltage of Cyclo Converter?
Fundamental Output Phase voltage of Cyclo Converter of the positive half-cycle of the output voltage waveform. It is a crucial parameter that determines the effective voltage delivered to the load and influences the overall performance of the cycloconverter system. the fundamental output phase voltage is the same for all three phases. However, the output voltage waveform may not be perfectly sinusoidal due to the inherent nature of the cycloconverter operation. This can lead to the presence of harmonics in the output voltage, which can affect the performance of the load and is represented as Vout = Vph*(m/pi)*sin(pi/m) or Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width). Phase Voltage of a cycloconverter is the voltage between any two of the three output terminals of a three-phase cycloconverter & Pulse Width control (PWM) cycloconverters are a type of cycloconverter that uses pulse-width modulation (PWM) to control the output voltage and frequency of the AC motor.
How to calculate Fundamental Output Phase Voltage of Cyclo Converter?
Fundamental Output Phase voltage of Cyclo Converter of the positive half-cycle of the output voltage waveform. It is a crucial parameter that determines the effective voltage delivered to the load and influences the overall performance of the cycloconverter system. the fundamental output phase voltage is the same for all three phases. However, the output voltage waveform may not be perfectly sinusoidal due to the inherent nature of the cycloconverter operation. This can lead to the presence of harmonics in the output voltage, which can affect the performance of the load is calculated using Output Voltage = Phase Voltage*(Pulse Width/pi)*sin(pi/Pulse Width). To calculate Fundamental Output Phase Voltage of Cyclo Converter, you need Phase Voltage (Vph) & Pulse Width (m). With our tool, you need to enter the respective value for Phase Voltage & Pulse Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Output Voltage?
In this formula, Output Voltage uses Phase Voltage & Pulse Width. We can use 1 other way(s) to calculate the same, which is/are as follows -
• Output Voltage = Maximum Output/sqrt(2)*(1/pi*(pi-Firing Angle+sin(2*Firing Angle)/2))^(1/2)
Let Others Know