## Initial Reactant Concentration Using Reactant Conversion with Varying Density Solution

STEP 0: Pre-Calculation Summary
Formula Used
Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion)
Co = ((C)*(1+ε*XA))/(1-XA)
This formula uses 4 Variables
Variables Used
Initial Reactant Concentration - (Measured in Mole per Meter³) - The Initial Reactant Concentration refers to the amount of reactant present in the solvent before the considered process.
Reactant Concentration - (Measured in Mole per Meter³) - The Reactant Concentration refers to the amount of reactant present in the solvent at any given point of time during the process.
Fractional Volume Change - Fractional Volume Change is the ratio of the change in volume and the initial volume.
Reactant Conversion - Reactant Conversion gives us the percentage of reactants converted into products. Enter the percentage as a decimal between 0 and 1.
STEP 1: Convert Input(s) to Base Unit
Reactant Concentration: 24 Mole per Meter³ --> 24 Mole per Meter³ No Conversion Required
Fractional Volume Change: 0.2 --> No Conversion Required
Reactant Conversion: 0.7 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Co = ((C)*(1+ε*XA))/(1-XA) --> ((24)*(1+0.2*0.7))/(1-0.7)
Evaluating ... ...
Co = 91.2
STEP 3: Convert Result to Output's Unit
91.2 Mole per Meter³ --> No Conversion Required
91.2 Mole per Meter³ <-- Initial Reactant Concentration
(Calculation completed in 00.000 seconds)
You are here -
Home »

## Credits

Created by akhilesh
K. K. Wagh Institute of Engineering Education and Research (K.K.W.I.E.E.R.), Nashik
akhilesh has created this Calculator and 25+ more calculators!
Verified by Prerana Bakli
National Institute of Technology (NIT), Meghalaya
Prerana Bakli has verified this Calculator and 800+ more calculators!

## < 9 Introduction to Reactor Design Calculators

Key Reactant Conversion with Varying Density,Temperature and Total Pressure
Key-Reactant Conversion = (1-((Key-Reactant Concentration/Initial Key-Reactant Concentration)*((Temperature*Initial Total Pressure)/(Initial Temperature*Total Pressure))))/(1+Fractional Volume Change*((Key-Reactant Concentration/Initial Key-Reactant Concentration)*((Temperature*Initial Total Pressure)/(Initial Temperature*Total Pressure)))) Go
Initial Key Reactant Concentration with Varying Density,Temperature and Total Pressure
Initial Key-Reactant Concentration = Key-Reactant Concentration*((1+Fractional Volume Change*Key-Reactant Conversion)/(1-Key-Reactant Conversion))*((Temperature*Initial Total Pressure)/(Initial Temperature*Total Pressure)) Go
Key Reactant Concentration with Varying Density,Temperature and Total Pressure
Key-Reactant Concentration = Initial Key-Reactant Concentration*((1-Key-Reactant Conversion)/(1+Fractional Volume Change*Key-Reactant Conversion))*((Initial Temperature*Total Pressure)/(Temperature*Initial Total Pressure)) Go
Reactant Conversion using Reactant Concentration with Varying Density
Reactant Conversion = (Initial Reactant Concentration-Reactant Concentration)/(Initial Reactant Concentration+Fractional Volume Change*Reactant Concentration) Go
Initial Reactant Concentration Using Reactant Conversion with Varying Density
Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion) Go
Reactant Concentration using Reactant Conversion with Varying Density
Reactant Concentration = ((1-Reactant Conversion)*(Initial Reactant Concentration))/(1+Fractional Volume Change*Reactant Conversion) Go
Initial Reactant Concentration Using Reactant Conversion
Initial Reactant Concentration = Reactant Concentration/(1-Reactant Conversion) Go
Reactant Concentration using Reactant Conversion
Reactant Concentration = Initial Reactant Concentration*(1-Reactant Conversion) Go
Reactant Conversion using Reactant Concentration
Reactant Conversion = 1-(Reactant Concentration/Initial Reactant Concentration) Go

## Initial Reactant Concentration Using Reactant Conversion with Varying Density Formula

Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion)
Co = ((C)*(1+ε*XA))/(1-XA)

## What are the factors to be considered for reactor design?

The different factors required for reactor design are (i) Size of reactor (ii) Type of reactor (iii) Time or duration of reaction (iv) Temperature & Composition of reacting material in the reactor (v) Heat removal or added and (vi) Flow pattern of fluid in the reactor.

## How to Calculate Initial Reactant Concentration Using Reactant Conversion with Varying Density?

Initial Reactant Concentration Using Reactant Conversion with Varying Density calculator uses Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion) to calculate the Initial Reactant Concentration, The Initial Reactant Concentration Using Reactant Conversion with Varying Density formula is defined as the concentration of reactant initially where density is changing and temperature and total pressure are constant in both batch and flow system. Initial Reactant Concentration is denoted by Co symbol.

How to calculate Initial Reactant Concentration Using Reactant Conversion with Varying Density using this online calculator? To use this online calculator for Initial Reactant Concentration Using Reactant Conversion with Varying Density, enter Reactant Concentration (C), Fractional Volume Change (ε) & Reactant Conversion (XA) and hit the calculate button. Here is how the Initial Reactant Concentration Using Reactant Conversion with Varying Density calculation can be explained with given input values -> 91.2 = ((24)*(1+0.2*0.7))/(1-0.7).

### FAQ

What is Initial Reactant Concentration Using Reactant Conversion with Varying Density?
The Initial Reactant Concentration Using Reactant Conversion with Varying Density formula is defined as the concentration of reactant initially where density is changing and temperature and total pressure are constant in both batch and flow system and is represented as Co = ((C)*(1+ε*XA))/(1-XA) or Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion). The Reactant Concentration refers to the amount of reactant present in the solvent at any given point of time during the process, Fractional Volume Change is the ratio of the change in volume and the initial volume & Reactant Conversion gives us the percentage of reactants converted into products. Enter the percentage as a decimal between 0 and 1.
How to calculate Initial Reactant Concentration Using Reactant Conversion with Varying Density?
The Initial Reactant Concentration Using Reactant Conversion with Varying Density formula is defined as the concentration of reactant initially where density is changing and temperature and total pressure are constant in both batch and flow system is calculated using Initial Reactant Concentration = ((Reactant Concentration)*(1+Fractional Volume Change*Reactant Conversion))/(1-Reactant Conversion). To calculate Initial Reactant Concentration Using Reactant Conversion with Varying Density, you need Reactant Concentration (C), Fractional Volume Change (ε) & Reactant Conversion (XA). With our tool, you need to enter the respective value for Reactant Concentration, Fractional Volume Change & Reactant Conversion and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Initial Reactant Concentration?
In this formula, Initial Reactant Concentration uses Reactant Concentration, Fractional Volume Change & Reactant Conversion. We can use 1 other way(s) to calculate the same, which is/are as follows -
• Initial Reactant Concentration = Reactant Concentration/(1-Reactant Conversion) Let Others Know