Inradius of Rhombus Solution

STEP 0: Pre-Calculation Summary
Formula Used
Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2
ri = (S*sin(Acute))/2
This formula uses 1 Functions, 3 Variables
Functions Used
sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)
Variables Used
Inradius of Rhombus - (Measured in Meter) - The Inradius of Rhombus is defined as the radius of the circle which is inscribed inside the Rhombus.
Side of Rhombus - (Measured in Meter) - The Side of Rhombus is the length of any of the four edges.
Acute Angle of Rhombus - (Measured in Radian) - Acute Angle of Rhombus is the angle inside the Rhombus which is less than 90 degree.
STEP 1: Convert Input(s) to Base Unit
Side of Rhombus: 10 Meter --> 10 Meter No Conversion Required
Acute Angle of Rhombus: 45 Degree --> 0.785398163397301 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ri = (S*sin(∠Acute))/2 --> (10*sin(0.785398163397301))/2
Evaluating ... ...
ri = 3.53553390593222
STEP 3: Convert Result to Output's Unit
3.53553390593222 Meter --> No Conversion Required
FINAL ANSWER
3.53553390593222 3.535534 Meter <-- Inradius of Rhombus
(Calculation completed in 00.004 seconds)

Credits

Created by Mona Gladys
St Joseph's College (SJC), Bengaluru
Mona Gladys has created this Calculator and 2000+ more calculators!
Verified by Shashwati Tidke
Vishwakarma Institute of Technology (VIT), Pune
Shashwati Tidke has verified this Calculator and 50+ more calculators!

10+ Inradius of Rhombus Calculators

Inradius of Rhombus given both Diagonals
Go Inradius of Rhombus = (Long Diagonal of Rhombus*Short Diagonal of Rhombus)/(2*sqrt(Long Diagonal of Rhombus^2+Short Diagonal of Rhombus^2))
Inradius of Rhombus given Short Diagonal and Side
Go Inradius of Rhombus = (Short Diagonal of Rhombus*sqrt(Side of Rhombus^2-Short Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
Inradius of Rhombus given Long Diagonal and Side
Go Inradius of Rhombus = (Long Diagonal of Rhombus*sqrt(Side of Rhombus^2-Long Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
Inradius of Rhombus given Area and Acute Angle
Go Inradius of Rhombus = sqrt(Area of Rhombus*sin(Acute Angle of Rhombus))/2
Inradius of Rhombus given Short Diagonal and Acute Angle
Go Inradius of Rhombus = Short Diagonal of Rhombus/2*cos(Acute Angle of Rhombus/2)
Inradius of Rhombus given Long Diagonal and Acute Angle
Go Inradius of Rhombus = Long Diagonal of Rhombus/2*sin(Acute Angle of Rhombus/2)
Inradius of Rhombus given Perimeter
Go Inradius of Rhombus = Perimeter of Rhombus/8*sin(Acute Angle of Rhombus)
Inradius of Rhombus
Go Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2
Inradius of Rhombus given Area and Side
Go Inradius of Rhombus = Area of Rhombus/(2*Side of Rhombus)
Inradius of Rhombus given Height
Go Inradius of Rhombus = Height of Rhombus/2

6 Inradius of Rhombus Calculators

Inradius of Rhombus given both Diagonals
Go Inradius of Rhombus = (Long Diagonal of Rhombus*Short Diagonal of Rhombus)/(2*sqrt(Long Diagonal of Rhombus^2+Short Diagonal of Rhombus^2))
Inradius of Rhombus given Short Diagonal and Side
Go Inradius of Rhombus = (Short Diagonal of Rhombus*sqrt(Side of Rhombus^2-Short Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
Inradius of Rhombus given Long Diagonal and Side
Go Inradius of Rhombus = (Long Diagonal of Rhombus*sqrt(Side of Rhombus^2-Long Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
Inradius of Rhombus
Go Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2
Inradius of Rhombus given Area and Side
Go Inradius of Rhombus = Area of Rhombus/(2*Side of Rhombus)
Inradius of Rhombus given Height
Go Inradius of Rhombus = Height of Rhombus/2

Inradius of Rhombus Formula

Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2
ri = (S*sin(Acute))/2

What is Rhombus?

A Rhombus is a special case of a parallelogram. In a Rhombus, opposite sides are parallel and the opposite angles are equal. Moreover, all the sides of a Rhombus are equal in length, and the diagonals bisect each other at right angles. The rhombus is also called a diamond or Rhombus diamond. The plural form of a Rhombus is Rhombi or Rhombuses.

What is an Inscribed Circle?

In geometry, the incircle or inscribed circle of a polygon is the largest circle contained in the polygon; it touches (is tangent to) the many sides. The center of the incircle is called the polygon's incenter.The center of the incircle can be found as the intersection of the many internal angle bisectors.

How to Calculate Inradius of Rhombus?

Inradius of Rhombus calculator uses Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2 to calculate the Inradius of Rhombus, Inradius of Rhombus is defined as the radius of the circle inscribed inside the Rhombus. Inradius of Rhombus is denoted by ri symbol.

How to calculate Inradius of Rhombus using this online calculator? To use this online calculator for Inradius of Rhombus, enter Side of Rhombus (S) & Acute Angle of Rhombus (∠Acute) and hit the calculate button. Here is how the Inradius of Rhombus calculation can be explained with given input values -> 3.535534 = (10*sin(0.785398163397301))/2.

FAQ

What is Inradius of Rhombus?
Inradius of Rhombus is defined as the radius of the circle inscribed inside the Rhombus and is represented as ri = (S*sin(∠Acute))/2 or Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2. The Side of Rhombus is the length of any of the four edges & Acute Angle of Rhombus is the angle inside the Rhombus which is less than 90 degree.
How to calculate Inradius of Rhombus?
Inradius of Rhombus is defined as the radius of the circle inscribed inside the Rhombus is calculated using Inradius of Rhombus = (Side of Rhombus*sin(Acute Angle of Rhombus))/2. To calculate Inradius of Rhombus, you need Side of Rhombus (S) & Acute Angle of Rhombus (∠Acute). With our tool, you need to enter the respective value for Side of Rhombus & Acute Angle of Rhombus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Inradius of Rhombus?
In this formula, Inradius of Rhombus uses Side of Rhombus & Acute Angle of Rhombus. We can use 14 other way(s) to calculate the same, which is/are as follows -
  • Inradius of Rhombus = Area of Rhombus/(2*Side of Rhombus)
  • Inradius of Rhombus = sqrt(Area of Rhombus*sin(Acute Angle of Rhombus))/2
  • Inradius of Rhombus = (Long Diagonal of Rhombus*Short Diagonal of Rhombus)/(2*sqrt(Long Diagonal of Rhombus^2+Short Diagonal of Rhombus^2))
  • Inradius of Rhombus = Long Diagonal of Rhombus/2*sin(Acute Angle of Rhombus/2)
  • Inradius of Rhombus = Short Diagonal of Rhombus/2*cos(Acute Angle of Rhombus/2)
  • Inradius of Rhombus = (Long Diagonal of Rhombus*sqrt(Side of Rhombus^2-Long Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
  • Inradius of Rhombus = (Short Diagonal of Rhombus*sqrt(Side of Rhombus^2-Short Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
  • Inradius of Rhombus = Height of Rhombus/2
  • Inradius of Rhombus = Perimeter of Rhombus/8*sin(Acute Angle of Rhombus)
  • Inradius of Rhombus = Area of Rhombus/(2*Side of Rhombus)
  • Inradius of Rhombus = (Long Diagonal of Rhombus*Short Diagonal of Rhombus)/(2*sqrt(Long Diagonal of Rhombus^2+Short Diagonal of Rhombus^2))
  • Inradius of Rhombus = Height of Rhombus/2
  • Inradius of Rhombus = (Long Diagonal of Rhombus*sqrt(Side of Rhombus^2-Long Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
  • Inradius of Rhombus = (Short Diagonal of Rhombus*sqrt(Side of Rhombus^2-Short Diagonal of Rhombus^2/4))/(2*Side of Rhombus)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!