Kirpich Adjustment Factor Solution

STEP 0: Pre-Calculation Summary
Formula Used
Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation)
K1 = sqrt(L^3/ΔH)
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Kirpich Adjustment Factor - Kirpich Adjustment Factor for a region under study.
Maximum Length of Travel of Water - (Measured in Meter) - Maximum Length of Travel of Water in the watershed.
Difference in Elevation - (Measured in Meter) - The Difference in Elevation between the most remote point on the catchment and the outlet.
STEP 1: Convert Input(s) to Base Unit
Maximum Length of Travel of Water: 3 Kilometer --> 3000 Meter (Check conversion here)
Difference in Elevation: 9 Meter --> 9 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
K1 = sqrt(L^3/ΔH) --> sqrt(3000^3/9)
Evaluating ... ...
K1 = 54772.2557505166
STEP 3: Convert Result to Output's Unit
54772.2557505166 --> No Conversion Required
FINAL ANSWER
54772.2557505166 54772.26 <-- Kirpich Adjustment Factor
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

6 Kirpich Equation(1940) Calculators

Kirpich Adjustment Factor
Go Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation)
Maximum Length of Travel of Water
Go Maximum Length of Travel of Water = (Time of Concentration/(0.01947*Slope of Catchment^(-0.385)))^(1/0.77)
Slope of Catchment about given Time of Concentration
Go Slope of Catchment = (Time of Concentration/(0.01947*Maximum Length of Travel of Water^0.77))^(-1/0.385)
Kirpich equation for Time of Concentration
Go Time of Concentration = 0.01947*(Maximum Length of Travel of Water^0.77)*Slope of Catchment^(-0.385)
Kirpich Equation
Go Time of Concentration = 0.01947*Maximum Length of Travel of Water^(0.77)*Slope of Catchment^(-0.385)
Time of Concentration from Kirpich Adjustment Factor
Go Time of Concentration = 0.01947*Kirpich Adjustment Factor^0.77

Kirpich Adjustment Factor Formula

Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation)
K1 = sqrt(L^3/ΔH)

What is Time of Concentration?

Time of concentration is a concept used in hydrology to measure the response of a watershed to a rain event. It is defined as the time needed for water to flow from the most remote point in a watershed to the watershed outlet. It is a function of the topography, geology, and land use within the watershed.

What is the Catchment Area of a river?

A water catchment (commonly referred to as a “watershed”) is an area of land where all water flows to a single stream, river, lake or even ocean. Natural boundaries of water catchments can be very small for a single creek or stream or quite large.

How to Calculate Kirpich Adjustment Factor?

Kirpich Adjustment Factor calculator uses Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation) to calculate the Kirpich Adjustment Factor, The Kirpich Adjustment Factor formula is defined as a coefficient to establish the time of concentration for small basins. Kirpich Adjustment Factor is denoted by K1 symbol.

How to calculate Kirpich Adjustment Factor using this online calculator? To use this online calculator for Kirpich Adjustment Factor, enter Maximum Length of Travel of Water (L) & Difference in Elevation (ΔH) and hit the calculate button. Here is how the Kirpich Adjustment Factor calculation can be explained with given input values -> 1.732051 = sqrt(3^3/9).

FAQ

What is Kirpich Adjustment Factor?
The Kirpich Adjustment Factor formula is defined as a coefficient to establish the time of concentration for small basins and is represented as K1 = sqrt(L^3/ΔH) or Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation). Maximum Length of Travel of Water in the watershed & The Difference in Elevation between the most remote point on the catchment and the outlet.
How to calculate Kirpich Adjustment Factor?
The Kirpich Adjustment Factor formula is defined as a coefficient to establish the time of concentration for small basins is calculated using Kirpich Adjustment Factor = sqrt(Maximum Length of Travel of Water^3/Difference in Elevation). To calculate Kirpich Adjustment Factor, you need Maximum Length of Travel of Water (L) & Difference in Elevation (ΔH). With our tool, you need to enter the respective value for Maximum Length of Travel of Water & Difference in Elevation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!