Length using Line Losses (2 Phase 4 Wire US) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity)
L = Ploss*A/(2*(I^2)*ρ)
This formula uses 5 Variables
Variables Used
Length of Underground AC Wire - (Measured in Meter) - Length of Underground AC Wire is the total length of the wire from one end to other end.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Underground AC line when in use.
Area of Underground AC Wire - (Measured in Square Meter) - Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system.
Current Underground AC - (Measured in Ampere) - Current Underground AC is defined as the current flowing through the overhead ac supply wire.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
STEP 1: Convert Input(s) to Base Unit
Line Losses: 2.67 Watt --> 2.67 Watt No Conversion Required
Area of Underground AC Wire: 1.28 Square Meter --> 1.28 Square Meter No Conversion Required
Current Underground AC: 9 Ampere --> 9 Ampere No Conversion Required
Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
L = Ploss*A/(2*(I^2)*ρ) --> 2.67*1.28/(2*(9^2)*1.7E-05)
Evaluating ... ...
L = 1240.95860566449
STEP 3: Convert Result to Output's Unit
1240.95860566449 Meter --> No Conversion Required
FINAL ANSWER
1240.95860566449 1240.959 Meter <-- Length of Underground AC Wire
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

14 Wire Parameters Calculators

Length using Area of X-Section (2 Phase 4 Wire US)
Go Length of Underground AC Wire = (Area of Underground AC Wire*Line Losses*(Maximum Voltage Underground AC^2)*(cos(Phase Difference))^2)/(4*Resistivity*(Power Transmitted^2))
Line Losses using Area of X-Section (2 Phase 4 Wire US)
Go Line Losses = 4*Resistivity*Length of Underground AC Wire*(Power Transmitted^2)/(Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*(cos(Phase Difference)^2))
Volume of Conductor Material Main(2 Phase 4 Wire US)
Go Volume Of Conductor = 8*(Power Transmitted^2)*Resistivity*(Length of Underground AC Wire^2)/(Line Losses*(Maximum Voltage Underground AC^2)*(cos(Phase Difference)^2))
Length using Line Losses (2 Phase 4 Wire US)
Go Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity)
Area using Line Losses (2 Phase 4 Wire US)
Go Area of Underground AC Wire = (Current Underground AC^2)*2*Resistivity*Length of Underground AC Wire/Line Losses
Line Losses using Load Current (2 Phase 4 Wire US)
Go Line Losses = Current Underground AC^2*2*Resistivity*Length of Underground AC Wire/Area of Underground AC Wire
Volume of Conductor Material using Load Current(2 Phase 4 Wire US)
Go Volume Of Conductor = 16*Resistivity*(Length of Underground AC Wire^2)*(Current Underground AC^2)/Line Losses
Volume of Conductor Material using Load Current (2 Phase 4 Wire US)
Go Volume Of Conductor = (Current Underground AC*Length of Underground AC Wire)^2*4*Resistivity/Line Losses
Line Losses using Volume of Conductor Material (2 Phase 4 Wire US)
Go Line Losses = (Current Underground AC*Length of Underground AC Wire)^2*4*Resistivity/Volume Of Conductor
Volume of Conductor Material using Constant(2 Phase 4 Wire US)
Go Volume Of Conductor = 2*Constant Underground AC/(cos(Phase Difference)^2)
Length using Volume of Conductor Material (2 Phase 4 Wire US)
Go Length of Underground AC Wire = Volume Of Conductor/(2*Area of Underground AC Wire)
Area using Volume of Conductor Material (2 Phase 4 Wire US)
Go Area of Underground AC Wire = Volume Of Conductor/(2*Length of Underground AC Wire)
Volume of Conductor Material (2 Phase 4 Wire US)
Go Volume Of Conductor = 2*Area of Underground AC Wire*Length of Underground AC Wire
Line Losses (2 Phase 4 Wire US)
Go Line Losses = 2*(Current Underground AC^2)*Resistance Underground AC

Length using Line Losses (2 Phase 4 Wire US) Formula

Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity)
L = Ploss*A/(2*(I^2)*ρ)

Does resistivity change with length?

Resistivity is an intrinsic property of any material. It stays the same, no matter how long or thick your conductor is. Temperature coefficient*original resistivity*change in temperature. So there is no change with length in resistivity but resistance changes in direct proportion with the length of the conductor.

How to Calculate Length using Line Losses (2 Phase 4 Wire US)?

Length using Line Losses (2 Phase 4 Wire US) calculator uses Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity) to calculate the Length of Underground AC Wire, The Length using Line Losses (2 phase 4 wire US) formula is defined as the total length of the wire that used in the two-phase four-wire system. Length of Underground AC Wire is denoted by L symbol.

How to calculate Length using Line Losses (2 Phase 4 Wire US) using this online calculator? To use this online calculator for Length using Line Losses (2 Phase 4 Wire US), enter Line Losses (Ploss), Area of Underground AC Wire (A), Current Underground AC (I) & Resistivity (ρ) and hit the calculate button. Here is how the Length using Line Losses (2 Phase 4 Wire US) calculation can be explained with given input values -> 1240.959 = 2.67*1.28/(2*(9^2)*1.7E-05).

FAQ

What is Length using Line Losses (2 Phase 4 Wire US)?
The Length using Line Losses (2 phase 4 wire US) formula is defined as the total length of the wire that used in the two-phase four-wire system and is represented as L = Ploss*A/(2*(I^2)*ρ) or Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity). Line Losses is defined as the total losses occurring in an Underground AC line when in use, Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system, Current Underground AC is defined as the current flowing through the overhead ac supply wire & Resistivity is the measure of how strongly a material opposes the flow of current through them.
How to calculate Length using Line Losses (2 Phase 4 Wire US)?
The Length using Line Losses (2 phase 4 wire US) formula is defined as the total length of the wire that used in the two-phase four-wire system is calculated using Length of Underground AC Wire = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC^2)*Resistivity). To calculate Length using Line Losses (2 Phase 4 Wire US), you need Line Losses (Ploss), Area of Underground AC Wire (A), Current Underground AC (I) & Resistivity (ρ). With our tool, you need to enter the respective value for Line Losses, Area of Underground AC Wire, Current Underground AC & Resistivity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Length of Underground AC Wire?
In this formula, Length of Underground AC Wire uses Line Losses, Area of Underground AC Wire, Current Underground AC & Resistivity. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Length of Underground AC Wire = (Area of Underground AC Wire*Line Losses*(Maximum Voltage Underground AC^2)*(cos(Phase Difference))^2)/(4*Resistivity*(Power Transmitted^2))
  • Length of Underground AC Wire = Volume Of Conductor/(2*Area of Underground AC Wire)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!