Load Current(2-Phase 4-Wire OS) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference))
I = P/(2*sqrt(2)*Vm*cos(Φ))
This formula uses 2 Functions, 4 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Current Overhead AC - (Measured in Ampere) - Current Overhead AC is defined as the current flowing through the overhead ac supply wire.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Maximum Voltage Overhead AC - (Measured in Volt) - Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
STEP 1: Convert Input(s) to Base Unit
Power Transmitted: 890 Watt --> 890 Watt No Conversion Required
Maximum Voltage Overhead AC: 62 Volt --> 62 Volt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
I = P/(2*sqrt(2)*Vm*cos(Φ)) --> 890/(2*sqrt(2)*62*cos(0.5235987755982))
Evaluating ... ...
I = 5.86033836311029
STEP 3: Convert Result to Output's Unit
5.86033836311029 Ampere --> No Conversion Required
FINAL ANSWER
5.86033836311029 5.860338 Ampere <-- Current Overhead AC
(Calculation completed in 00.004 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

10+ Current & Voltage Calculators

Maximum Voltage using Area of X-Section(2-Phase 4-Wire OS)
Go Maximum Voltage Overhead AC = sqrt((Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(2*Area of Overhead AC Wire*Line Losses*((cos(Phase Difference))^2)))
RMS Voltage using Area of X-Section(2-Phase 4-Wire OS)
Go Root Mean Square Voltage = sqrt((Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*Line Losses*((cos(Phase Difference))^2)))
Maximum Voltage using Line Losses (2-Phase 4-Wire OS)
Go Maximum Voltage Overhead AC = Power Transmitted*sqrt(Resistivity*Length of Overhead AC Wire/(Area of Overhead AC Wire*Line Losses*2))/cos(Phase Difference)
RMS Voltage using Line Losses (2-Phase 4-Wire OS)
Go Root Mean Square Voltage = (Power Transmitted/cos(Phase Difference))*sqrt(Resistivity*Length of Overhead AC Wire/(Area of Overhead AC Wire*Line Losses))
Load Current using Area of X-Section(2-Phase 4-Wire OS)
Go Current Overhead AC = sqrt(Line Losses*Area of Overhead AC Wire/((32)*Resistivity*Length of Overhead AC Wire))
Load Current using Line Losses (2-Phase 4-Wire OS)
Go Current Overhead AC = sqrt(Line Losses*Area of Overhead AC Wire/(4*Resistivity*Length of Overhead AC Wire))
Maximum Voltage using Load Current (2-Phase 4-Wire OS)
Go Maximum Voltage Overhead AC = Power Transmitted/(2*(sqrt(2))*Current Overhead AC*(cos(Phase Difference)))
Load Current(2-Phase 4-Wire OS)
Go Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference))
RMS Voltage using Load Current (2-Phase 4-Wire OS)
Go Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC)
Maximum Voltage(2-Phase 4-Wire OS)
Go Maximum Voltage Overhead AC = (2)*Voltage Overhead AC

Load Current(2-Phase 4-Wire OS) Formula

Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference))
I = P/(2*sqrt(2)*Vm*cos(Φ))

What is the value of maximum voltage and volume of conductor material in 2-phase 4-wire system?

The volume of conductor material required in this system is (1/2)cos2θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is 2vm so that r.m.s. value of voltage between them is √2vm.

How to Calculate Load Current(2-Phase 4-Wire OS)?

Load Current(2-Phase 4-Wire OS) calculator uses Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference)) to calculate the Current Overhead AC, The Load Current(2-Phase 4-Wire OS) formula is defined as the current that flows into the load of the single-phase two-wire overhead system. Current Overhead AC is denoted by I symbol.

How to calculate Load Current(2-Phase 4-Wire OS) using this online calculator? To use this online calculator for Load Current(2-Phase 4-Wire OS), enter Power Transmitted (P), Maximum Voltage Overhead AC (Vm) & Phase Difference (Φ) and hit the calculate button. Here is how the Load Current(2-Phase 4-Wire OS) calculation can be explained with given input values -> 5.860338 = 890/(2*sqrt(2)*62*cos(0.5235987755982)).

FAQ

What is Load Current(2-Phase 4-Wire OS)?
The Load Current(2-Phase 4-Wire OS) formula is defined as the current that flows into the load of the single-phase two-wire overhead system and is represented as I = P/(2*sqrt(2)*Vm*cos(Φ)) or Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference)). Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end, Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire & Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
How to calculate Load Current(2-Phase 4-Wire OS)?
The Load Current(2-Phase 4-Wire OS) formula is defined as the current that flows into the load of the single-phase two-wire overhead system is calculated using Current Overhead AC = Power Transmitted/(2*sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference)). To calculate Load Current(2-Phase 4-Wire OS), you need Power Transmitted (P), Maximum Voltage Overhead AC (Vm) & Phase Difference (Φ). With our tool, you need to enter the respective value for Power Transmitted, Maximum Voltage Overhead AC & Phase Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Current Overhead AC?
In this formula, Current Overhead AC uses Power Transmitted, Maximum Voltage Overhead AC & Phase Difference. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Current Overhead AC = sqrt(Line Losses*Area of Overhead AC Wire/((32)*Resistivity*Length of Overhead AC Wire))
  • Current Overhead AC = sqrt(Line Losses*Area of Overhead AC Wire/(4*Resistivity*Length of Overhead AC Wire))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!