Load Current (2-Wire Mid-Point DC US) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Current underground DC = Power Transmitted/Maximum Voltage
C1 = P/Vm
This formula uses 3 Variables
Variables Used
Current underground DC - (Measured in Ampere) - Current underground DC is defined as the current flowing through the overhead ac supply wire.
Power Transmitted - (Measured in Watt) - Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.
Maximum Voltage - (Measured in Volt) - Maximum Voltage the highest voltage rating for electrical devices.
STEP 1: Convert Input(s) to Base Unit
Power Transmitted: 300 Watt --> 300 Watt No Conversion Required
Maximum Voltage: 60 Volt --> 60 Volt No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
C1 = P/Vm --> 300/60
Evaluating ... ...
C1 = 5
STEP 3: Convert Result to Output's Unit
5 Ampere --> No Conversion Required
FINAL ANSWER
5 Ampere <-- Current underground DC
(Calculation completed in 00.020 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

5 Current & Voltage Calculators

RMS Voltage using Area of X-Section (2-Wire Mid-Point Earthed DC US)
Go Root Mean Square Voltage = (Power Transmitted)*sqrt(Resistivity*Length of Wire DC/(Line Losses*Area of underground dc wire))
Maximum Voltage using Area of X-Section (2-Wire Mid-Point Earthed DC US)
Go Maximum Voltage = (Power Transmitted)*sqrt(Resistivity*Length of Wire DC*2/(Line Losses*Area of underground dc wire))
Maximum Voltage using Volume of Conductor Material (2-Wire Mid-Point DC US)
Go Maximum Voltage = (2*Power Transmitted*Length of Wire DC)*sqrt(Resistivity/(Line Losses*Volume Of Conductor))
Maximum Voltage using Load Current (2-Wire Mid-Point DC US)
Go Maximum Voltage = (Power Transmitted)/Current underground DC
Load Current (2-Wire Mid-Point DC US)
Go Current underground DC = Power Transmitted/Maximum Voltage

Load Current (2-Wire Mid-Point DC US) Formula

Current underground DC = Power Transmitted/Maximum Voltage
C1 = P/Vm

Define Transmitted Power.

Transmitted Power is the bulk movement of electrical energy from a generating site, such as a power station or power plant, to an electrical substation where voltage is transformed and distributed to consumers or other substations.

How to Calculate Load Current (2-Wire Mid-Point DC US)?

Load Current (2-Wire Mid-Point DC US) calculator uses Current underground DC = Power Transmitted/Maximum Voltage to calculate the Current underground DC, The Load Current (2-wire Mid-point DC US) formula is defined as the current that flows into the load of the single-phase two-wire underground system. Current underground DC is denoted by C1 symbol.

How to calculate Load Current (2-Wire Mid-Point DC US) using this online calculator? To use this online calculator for Load Current (2-Wire Mid-Point DC US), enter Power Transmitted (P) & Maximum Voltage (Vm) and hit the calculate button. Here is how the Load Current (2-Wire Mid-Point DC US) calculation can be explained with given input values -> 5 = 300/60.

FAQ

What is Load Current (2-Wire Mid-Point DC US)?
The Load Current (2-wire Mid-point DC US) formula is defined as the current that flows into the load of the single-phase two-wire underground system and is represented as C1 = P/Vm or Current underground DC = Power Transmitted/Maximum Voltage. Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work & Maximum Voltage the highest voltage rating for electrical devices.
How to calculate Load Current (2-Wire Mid-Point DC US)?
The Load Current (2-wire Mid-point DC US) formula is defined as the current that flows into the load of the single-phase two-wire underground system is calculated using Current underground DC = Power Transmitted/Maximum Voltage. To calculate Load Current (2-Wire Mid-Point DC US), you need Power Transmitted (P) & Maximum Voltage (Vm). With our tool, you need to enter the respective value for Power Transmitted & Maximum Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!