## Luminance for Lambertian Surfaces Solution

STEP 0: Pre-Calculation Summary
Formula Used
Luminance = Illumination Intensity/pi
Lv = Ev/pi
This formula uses 1 Constants, 2 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Luminance - (Measured in Lux) - Luminance describes the amount of light that is emitted from, passed through, or reflected off an object. It is measured using candela per square meter.
Illumination Intensity - (Measured in Lux) - Illumination Intensity is defined as the number of lumens, falling on the surface, per unit area.
STEP 1: Convert Input(s) to Base Unit
Illumination Intensity: 0.8 Lux --> 0.8 Lux No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Lv = Ev/pi --> 0.8/pi
Evaluating ... ...
Lv = 0.254647908947033
STEP 3: Convert Result to Output's Unit
0.254647908947033 Lux -->0.254647908947033 Candela Steradian per Sq Meter (Check conversion here)
0.254647908947033 Candela Steradian per Sq Meter <-- Luminance
(Calculation completed in 00.016 seconds)
You are here -
Home »

## Credits

Created by Aman Dhussawat
GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI
Aman Dhussawat has created this Calculator and 10+ more calculators!
Verified by Parminder Singh
Chandigarh University (CU), Punjab
Parminder Singh has verified this Calculator and 300+ more calculators!

## < 7 Methods of Lighting Calculators

Number of Lamps Required for Illumination
Number of Lamp = (Illumination Intensity*Area of Illumination)/(Luminous Flux*Utilization Factor*Maintenance Factor)
Intensity of Light Transmitted
Intensity of Transmitted Light = Intensity of Light Entering the Material*exp(-Absorption Coefficient*Path Length)
Number of Floodlighting Units
Number of Floodlighting Units = (Area to be Lighted*Illumination Intensity)/(0.7*Lumen Flux)
Spectral Transmission Factor
Spectral Transmission Factor = Transmitted Spectral Emission/Spectral Irradiation
Spectral Reflection Factor
Spectral Reflection Factor = Reflected Spectral Emission/Spectral Irradiation
Spectral Luminous Efficacy
Spectral Luminous Efficacy = Maximum Sensitivity*Photopic Efficiency Value
Luminance for Lambertian Surfaces
Luminance = Illumination Intensity/pi

## Luminance for Lambertian Surfaces Formula

Luminance = Illumination Intensity/pi
Lv = Ev/pi

## What is meant by Lambertian surface?

The Lambertian diffuse model assumes that light reflected from a rough surface is dependent only on the surface normal and light direction, and therefore a Lambertian surface is equally bright in all directions. This model conflicts with the observed behavior for diffuse surfaces such as the moon.
The Lambertian diffuse model assumes that light reflected from a rough surface is dependent only on the surface normal and light direction, and therefore a Lambertian surface is equally bright in all directions. This model conflicts with the observed behavior for diffuse surfaces such as the moon.

## How to Calculate Luminance for Lambertian Surfaces?

Luminance for Lambertian Surfaces calculator uses Luminance = Illumination Intensity/pi to calculate the Luminance, The Luminance for Lambertian Surfaces formula is defined as the brightness of a Lambertian surface appears uniform from any direction of view; in other words, the luminance of the surface is isotropic. Lambertian surfaces are often referred to as ideal diffusion surfaces. Luminance is denoted by Lv symbol.

How to calculate Luminance for Lambertian Surfaces using this online calculator? To use this online calculator for Luminance for Lambertian Surfaces, enter Illumination Intensity (Ev) and hit the calculate button. Here is how the Luminance for Lambertian Surfaces calculation can be explained with given input values -> 0.254648 = 0.8/pi.

### FAQ

What is Luminance for Lambertian Surfaces?
The Luminance for Lambertian Surfaces formula is defined as the brightness of a Lambertian surface appears uniform from any direction of view; in other words, the luminance of the surface is isotropic. Lambertian surfaces are often referred to as ideal diffusion surfaces and is represented as Lv = Ev/pi or Luminance = Illumination Intensity/pi. Illumination Intensity is defined as the number of lumens, falling on the surface, per unit area.
How to calculate Luminance for Lambertian Surfaces?
The Luminance for Lambertian Surfaces formula is defined as the brightness of a Lambertian surface appears uniform from any direction of view; in other words, the luminance of the surface is isotropic. Lambertian surfaces are often referred to as ideal diffusion surfaces is calculated using Luminance = Illumination Intensity/pi. To calculate Luminance for Lambertian Surfaces, you need Illumination Intensity (Ev). With our tool, you need to enter the respective value for Illumination Intensity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well. Let Others Know