Machining and Operating Rate given Total Machining and Operating Cost Solution

STEP 0: Pre-Calculation Summary
Formula Used
Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time
M = Cm/TPT
This formula uses 3 Variables
Variables Used
Machining and Operating Rate - Machining and Operating Rate is the money charged for processing on and operating machines per unit time, including overheads.
Total Machining And Operating Cost - Total Machining And Operating Cost is the total amount of money required to machine a given batch of product.
Total Production Time - (Measured in Second) - Total Production Time is the net time taken to produce a complete match of products, including overheads.
STEP 1: Convert Input(s) to Base Unit
Total Machining And Operating Cost: 100 --> No Conversion Required
Total Production Time: 10 Minute --> 600 Second (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
M = Cm/TPT --> 100/600
Evaluating ... ...
M = 0.166666666666667
STEP 3: Convert Result to Output's Unit
0.166666666666667 --> No Conversion Required
FINAL ANSWER
0.166666666666667 0.166667 <-- Machining and Operating Rate
(Calculation completed in 00.004 seconds)

Credits

Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verified by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has verified this Calculator and 400+ more calculators!

22 Economics Of Metal-Cutting Operation Calculators

Total Production Time given Time for Individual Operation and Batch Size
Go Total Production Time = (Batch Size*Setup Time+Batch Size*Machining Time+Number of Tools Used*Time to Change One Tool)
Non-Productive Time for Each Component given Average Production Time
Go Setup Time = Average Production Time-(Machining Time+(Number of Tools Used*Time to Change One Tool/Batch Size))
Time for changing one Tool given Average Production Time
Go Time to Change One Tool = (Average Production Time-(Setup Time+Machining Time))*Batch Size/Number of Tools Used
Machining Time of Each Component given Average Production Time
Go Machining Time = Average Production Time-Setup Time-(Number of Tools Used*Time to Change One Tool/Batch Size)
Batch Size given Average Production Time
Go Batch Size = Time to Change One Tool*Number of Tools Used/(Average Production Time-(Setup Time+Machining Time))
Average Production Time of Each Component
Go Average Production Time = Setup Time+Machining Time+(Number of Tools Used*Time to Change One Tool/Batch Size)
Total Production Time
Go Total Production Time = (Total Machining Time+Non-Productive Time+Total Tool Changing Time)
Machining and Operating Rate given Total Machining and Operating Cost
Go Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time
Total Production Time given Total Machining and Operating Cost
Go Total Production Time = Total Machining And Operating Cost/Machining and Operating Rate
Total Machining and Operating Cost
Go Total Machining And Operating Cost = Machining and Operating Rate*Total Production Time
Total Non-Productive Cost
Go Total Production Cost = Non-Productive Time*Machining and Operating Rate
Total Tool-Changing Cost
Go Total Tool Changing Cost = Total Tool Changing Time*Number of Tools Used
Time for Changing one Tool given Total Tool Changing Time
Go Time to Change One Tool = Total Tool Changing Time/Number of Tools Used
Total Tool Changing Time
Go Total Tool Changing Time = Number of Tools Used*Time to Change One Tool
Cost of Tool given Total Cost of Tools
Go Cost of A Tool = Total Cost of Tools Used/Number of Tools Used
Total Cost of Tools Used
Go Total Cost of Tools Used = Number of Tools Used*Cost of A Tool
Machining Time for one Component using Total Machining Time
Go Machining Time = Total Machining Time/Batch Size
Total Machining Time or Total Machine Time
Go Total Machining Time = Batch Size*Machining Time
Size of Batch given Total Machining Time
Go Batch Size = Total Machining Time/Machining Time
Load or Unload or Setup Time given Total Non-Productive Time
Go Setup Time = Non-Productive Time/Batch Size
Size of Batch using Total Non-Productive Time
Go Batch Size = Non-Productive Time/Setup Time
Total Non-Productive Time
Go Non-Productive Time = Batch Size*Setup Time

Machining and Operating Rate given Total Machining and Operating Cost Formula

Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time
M = Cm/TPT

Machining Time Estimation Methods

Commonly used Machining Time Estimation Methods are:
1. By estimation
2. By Timing
3. By Comparison
4. By the sum of elementary pre-defined times

How to Calculate Machining and Operating Rate given Total Machining and Operating Cost?

Machining and Operating Rate given Total Machining and Operating Cost calculator uses Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time to calculate the Machining and Operating Rate, The Machining and Operating Rate given Total Machining and Operating Cost is a method to determine the maximum amount that can be spent on Machining and Operating when the resources to be used are strictly bounded. Machining and Operating Rate is denoted by M symbol.

How to calculate Machining and Operating Rate given Total Machining and Operating Cost using this online calculator? To use this online calculator for Machining and Operating Rate given Total Machining and Operating Cost, enter Total Machining And Operating Cost (Cm) & Total Production Time (TPT) and hit the calculate button. Here is how the Machining and Operating Rate given Total Machining and Operating Cost calculation can be explained with given input values -> 0.166667 = 100/600.

FAQ

What is Machining and Operating Rate given Total Machining and Operating Cost?
The Machining and Operating Rate given Total Machining and Operating Cost is a method to determine the maximum amount that can be spent on Machining and Operating when the resources to be used are strictly bounded and is represented as M = Cm/TPT or Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time. Total Machining And Operating Cost is the total amount of money required to machine a given batch of product & Total Production Time is the net time taken to produce a complete match of products, including overheads.
How to calculate Machining and Operating Rate given Total Machining and Operating Cost?
The Machining and Operating Rate given Total Machining and Operating Cost is a method to determine the maximum amount that can be spent on Machining and Operating when the resources to be used are strictly bounded is calculated using Machining and Operating Rate = Total Machining And Operating Cost/Total Production Time. To calculate Machining and Operating Rate given Total Machining and Operating Cost, you need Total Machining And Operating Cost (Cm) & Total Production Time (TPT). With our tool, you need to enter the respective value for Total Machining And Operating Cost & Total Production Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!