Machining Time for Horizontal and Vertical Spindle Surface-Grinder Solution

STEP 0: Pre-Calculation Summary
Formula Used
Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time
tm = dcut/(2*f*nr)+ts
This formula uses 5 Variables
Variables Used
Machining Time - (Measured in Second) - Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.
Depth of Cut - (Measured in Meter) - Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Feed Rate - (Measured in Meter Per Revolution) - Feed Rate is defined as the tool's distance travelled during one spindle revolution.
Frequency of Reciprocating Strokes - (Measured in Hertz) - The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.
Spark Out Time - (Measured in Second) - Spark Out Time is the time required in passing the workpiece under the wheel, without resetting the depth of cut.
STEP 1: Convert Input(s) to Base Unit
Depth of Cut: 13 Millimeter --> 0.013 Meter (Check conversion here)
Feed Rate: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Frequency of Reciprocating Strokes: 1.2 Hertz --> 1.2 Hertz No Conversion Required
Spark Out Time: 7 Second --> 7 Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tm = dcut/(2*f*nr)+ts --> 0.013/(2*0.0007*1.2)+7
Evaluating ... ...
tm = 14.7380952380952
STEP 3: Convert Result to Output's Unit
14.7380952380952 Second --> No Conversion Required
FINAL ANSWER
14.7380952380952 14.7381 Second <-- Machining Time
(Calculation completed in 00.004 seconds)

Credits

Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verified by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has verified this Calculator and 400+ more calculators!

10+ Grinding Operation Calculators

Spark Out time for Horizontal and Vertical Spindle Surface Grinder given Machining Time
Go Spark Out Time = Machining Time-(Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes))
Machining Time for Horizontal and Vertical Spindle Surface-Grinder
Go Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time
Material Removal Rate in Cylindrical and Internal Grinder
Go Material Removal Rate in Drilling = pi*Feed Rate*Work Surface Diameter*Traverse Speed
Material Removal Rate in Plunge-Grinder
Go Material Removal Rate in Drilling = pi*Feed Rate*Work Surface Diameter*Feed Speed
Machining Time for Plunge Grinder
Go Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
Traverse Speed for Cylindrical and Internal Grinder given MRR
Go Traverse Speed = pi*Feed Rate*Work Surface Diameter/Metal removal rate
Material Removal Rate in Horizontal and Vertical Spindle Surface-Grinder
Go Material Removal Rate in Drilling = Feed Rate*Depth of Cut*Traverse Speed
Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR
Go Traverse Speed = Feed Rate*Depth of Cut/Metal removal rate
Spark Out time for Cylindrical and Internal Grinder using Machining Time
Go Spark Out Time = Machining Time-(Depth of Cut/Feed Speed)
Machining Time for Cylindrical and Internal Grinder
Go Machining Time = Spark Out Time+Depth of Cut/Feed Speed

7 Machining Time Calculators

Machining Time for Horizontal and Vertical Spindle Surface-Grinder
Go Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time
Machining Time for Drilling Operation
Go Machining Time = (Length of Cut+Length of Approach)/(Feed Rate*Rotational Frequency)
Machining Time for Plunge Grinder
Go Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
Machining Time for Shaping Operation
Go Machining Time = Width of Workpiece/(Feed Rate*Frequency of Reciprocating Strokes)
Machining Time for Turning Operation
Go Machining Time = Length of Cut/(Feed Rate*Angular Velocity of Job or Workpiece)
Machining Time for Milling Operation
Go Machining Time = (Length of Workpiece+Length of Approach)/Feed Speed
Machining Time for Cylindrical and Internal Grinder
Go Machining Time = Spark Out Time+Depth of Cut/Feed Speed

Machining Time for Horizontal and Vertical Spindle Surface-Grinder Formula

Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time
tm = dcut/(2*f*nr)+ts

what is Sparking Out?

On completion of the theoretical number of cutting strokes required, some work material will still have to be removed from the Work Surface to obtain a better finish. The phenomenon of removing these unwanted chips is called Sparking Out.

How to Calculate Machining Time for Horizontal and Vertical Spindle Surface-Grinder?

Machining Time for Horizontal and Vertical Spindle Surface-Grinder calculator uses Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time to calculate the Machining Time, Machining Time for Horizontal and Vertical Spindle Surface-Grinder is the time required to Operate on a Workpiece when grinding operation is down using a Horizontal or Vertical Spindle Surface-Grinder. Machining Time is denoted by tm symbol.

How to calculate Machining Time for Horizontal and Vertical Spindle Surface-Grinder using this online calculator? To use this online calculator for Machining Time for Horizontal and Vertical Spindle Surface-Grinder, enter Depth of Cut (dcut), Feed Rate (f), Frequency of Reciprocating Strokes (nr) & Spark Out Time (ts) and hit the calculate button. Here is how the Machining Time for Horizontal and Vertical Spindle Surface-Grinder calculation can be explained with given input values -> 14.7381 = 0.013/(2*0.0007*1.2)+7.

FAQ

What is Machining Time for Horizontal and Vertical Spindle Surface-Grinder?
Machining Time for Horizontal and Vertical Spindle Surface-Grinder is the time required to Operate on a Workpiece when grinding operation is down using a Horizontal or Vertical Spindle Surface-Grinder and is represented as tm = dcut/(2*f*nr)+ts or Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time. Depth of Cut is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction, Feed Rate is defined as the tool's distance travelled during one spindle revolution, The Frequency of Reciprocating Strokes is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time & Spark Out Time is the time required in passing the workpiece under the wheel, without resetting the depth of cut.
How to calculate Machining Time for Horizontal and Vertical Spindle Surface-Grinder?
Machining Time for Horizontal and Vertical Spindle Surface-Grinder is the time required to Operate on a Workpiece when grinding operation is down using a Horizontal or Vertical Spindle Surface-Grinder is calculated using Machining Time = Depth of Cut/(2*Feed Rate*Frequency of Reciprocating Strokes)+Spark Out Time. To calculate Machining Time for Horizontal and Vertical Spindle Surface-Grinder, you need Depth of Cut (dcut), Feed Rate (f), Frequency of Reciprocating Strokes (nr) & Spark Out Time (ts). With our tool, you need to enter the respective value for Depth of Cut, Feed Rate, Frequency of Reciprocating Strokes & Spark Out Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Machining Time?
In this formula, Machining Time uses Depth of Cut, Feed Rate, Frequency of Reciprocating Strokes & Spark Out Time. We can use 8 other way(s) to calculate the same, which is/are as follows -
  • Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
  • Machining Time = Spark Out Time+Depth of Cut/Feed Speed
  • Machining Time = (Length of Cut+Length of Approach)/(Feed Rate*Rotational Frequency)
  • Machining Time = (Length of Workpiece+Length of Approach)/Feed Speed
  • Machining Time = Width of Workpiece/(Feed Rate*Frequency of Reciprocating Strokes)
  • Machining Time = Length of Cut/(Feed Rate*Angular Velocity of Job or Workpiece)
  • Machining Time = Depth of Cut/(Feed Rate*Rotational Frequency)+Spark Out Time
  • Machining Time = Spark Out Time+Depth of Cut/Feed Speed
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!