Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support Solution

STEP 0: Pre-Calculation Summary
Formula Used
Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
δ = (0.00652*(q*(l^4))/(E*I))
This formula uses 5 Variables
Variables Used
Deflection of Beam - (Measured in Meter) - Deflection of Beam Deflection is the movement of a beam or node from its original position. It happens due to the forces and loads being applied to the body.
Uniformly Varying Load - (Measured in Newton per Meter) - Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
Elasticity Modulus of Concrete - (Measured in Pascal) - Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain.
Area Moment of Inertia - (Measured in Meter⁴) - Area Moment of Inertia is a moment about the centroidal axis without considering mass.
STEP 1: Convert Input(s) to Base Unit
Uniformly Varying Load: 37.5 Kilonewton per Meter --> 37500 Newton per Meter (Check conversion here)
Length of Beam: 5000 Millimeter --> 5 Meter (Check conversion here)
Elasticity Modulus of Concrete: 30000 Megapascal --> 30000000000 Pascal (Check conversion here)
Area Moment of Inertia: 0.0016 Meter⁴ --> 0.0016 Meter⁴ No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
δ = (0.00652*(q*(l^4))/(E*I)) --> (0.00652*(37500*(5^4))/(30000000000*0.0016))
Evaluating ... ...
δ = 0.00318359375
STEP 3: Convert Result to Output's Unit
0.00318359375 Meter -->3.18359375 Millimeter (Check conversion here)
FINAL ANSWER
3.18359375 3.183594 Millimeter <-- Deflection of Beam
(Calculation completed in 00.020 seconds)

Credits

Acharya Nagarjuna University College of Engg & Technology (ANU), Guntur
krupa sheela pattapu has created this Calculator and 25+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

15 Simply Supported Beam Calculators

Deflection at Any Point on Simply Supported Beam carrying UDL
Go Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))
Deflection at Any Point on Simply Supported carrying Couple Moment at Right End
Go Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))
Center Deflection on Simply Supported Beam carrying UVL with Maximum Intensity at Right support
Go Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support
Go Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum Deflection of Simply Supported Beam carrying Triangular Load with Max Intensity at Center
Go Deflection of Beam = (((Uniformly Varying Load*(Length of Beam^4))/(120*Elasticity Modulus of Concrete*Area Moment of Inertia)))
Maximum and Center Deflection of Simply Supported Beam carrying UDL over its Entire Length
Go Deflection of Beam = (5*Load per Unit Length*(Length of Beam^4))/(384*Elasticity Modulus of Concrete*Area Moment of Inertia)
Maximum Deflection of Simply Supported Beam carrying Couple Moment at Right End
Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(15.5884*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Left End of Simply Supported Beam carrying UVL with Maximum Intensity at Right End
Go Slope of Beam = ((7*Uniformly Varying Load*Length of Beam^3)/(360*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Right End of Simply Supported Beam carrying UVL with Maximum Intensity at Right End
Go Slope of Beam = ((Uniformly Varying Load*Length of Beam^3)/(45*Elasticity Modulus of Concrete*Area Moment of Inertia))
Center Deflection of Simply Supported Beam carrying Couple Moment at Right End
Go Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free Ends of Simply Supported Beam carrying UDL
Go Slope of Beam = ((Load per Unit Length*Length of Beam^3)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))
Maximum and Center Deflection of Simply Supported Beam carrying Point Load at Center
Go Deflection of Beam = (Point Load*(Length of Beam^3))/(48*Elasticity Modulus of Concrete*Area Moment of Inertia)
Slope at Right End of Simply Supported Beam carrying Couple at Right End
Go Slope of Beam = ((Moment of Couple*Length of Beam)/(3*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Left End of Simply Supported Beam carrying Couple at Right End
Go Slope of Beam = ((Moment of Couple*Length of Beam)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))
Slope at Free Ends of Simply Supported Beam carrying Concentrated Load at Center
Go Slope of Beam = ((Point Load*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))

Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support Formula

Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
δ = (0.00652*(q*(l^4))/(E*I))

What is Beam Deflection?

The deformation of a Beam is usually expressed in terms of its deflection from its original unloaded position. The deflection is measured from the original neutral surface of the beam to the neutral surface of the deformed beam. The configuration assumed by the deformed neutral surface is known as the elastic curve of the beam.

What is UVL?

The Uniformly Varying Load (UVL), A UVL is one which is spread over the beam in such a manner that rate of loading varies from each point along the beam, in which load is zero at one end and increase uniformly to the other end.

How to Calculate Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support?

Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support calculator uses Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)) to calculate the Deflection of Beam, The Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support formula is defined as maximum displacement, which can occur from externally applied loads i.e., uniformly varying load in this case. Deflection of Beam is denoted by δ symbol.

How to calculate Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support using this online calculator? To use this online calculator for Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support, enter Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I) and hit the calculate button. Here is how the Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support calculation can be explained with given input values -> 3183.594 = (0.00652*(37500*(5^4))/(30000000000*0.0016)).

FAQ

What is Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support?
The Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support formula is defined as maximum displacement, which can occur from externally applied loads i.e., uniformly varying load in this case and is represented as δ = (0.00652*(q*(l^4))/(E*I)) or Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)). Uniformly varying load is the load whose magnitude varies uniformly along the length of the structure, Length of Beam is defined as the distance between the supports, Elasticity modulus of Concrete (Ec) is the ratio of the applied stress to the corresponding strain & Area Moment of Inertia is a moment about the centroidal axis without considering mass.
How to calculate Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support?
The Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support formula is defined as maximum displacement, which can occur from externally applied loads i.e., uniformly varying load in this case is calculated using Deflection of Beam = (0.00652*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia)). To calculate Maximum Deflection on Simply Supported Beam carrying UVL Max Intensity at Right Support, you need Uniformly Varying Load (q), Length of Beam (l), Elasticity Modulus of Concrete (E) & Area Moment of Inertia (I). With our tool, you need to enter the respective value for Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Deflection of Beam?
In this formula, Deflection of Beam uses Uniformly Varying Load, Length of Beam, Elasticity Modulus of Concrete & Area Moment of Inertia. We can use 8 other way(s) to calculate the same, which is/are as follows -
  • Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(16*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Deflection of Beam = (0.00651*(Uniformly Varying Load*(Length of Beam^4))/(Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Deflection of Beam = (((Moment of Couple*Length of Beam*Distance x from Support)/(6*Elasticity Modulus of Concrete*Area Moment of Inertia))*(1-((Distance x from Support^2)/(Length of Beam^2))))
  • Deflection of Beam = ((((Load per Unit Length*Distance x from Support)/(24*Elasticity Modulus of Concrete*Area Moment of Inertia))*((Length of Beam^3)-(2*Length of Beam*Distance x from Support^2)+(Distance x from Support^3))))
  • Deflection of Beam = (Point Load*(Length of Beam^3))/(48*Elasticity Modulus of Concrete*Area Moment of Inertia)
  • Deflection of Beam = (5*Load per Unit Length*(Length of Beam^4))/(384*Elasticity Modulus of Concrete*Area Moment of Inertia)
  • Deflection of Beam = ((Moment of Couple*Length of Beam^2)/(15.5884*Elasticity Modulus of Concrete*Area Moment of Inertia))
  • Deflection of Beam = (((Uniformly Varying Load*(Length of Beam^4))/(120*Elasticity Modulus of Concrete*Area Moment of Inertia)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!