Maximum limit size of shaft from minimum clearance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance
Smax = Hmin-Cmin
This formula uses 3 Variables
Variables Used
Maximum Limit Size of shaft - (Measured in Meter) - Maximum limit size of shaft is the maximum diameter of shaft possible.
Minimum limit size of hole - (Measured in Meter) - Minimum limit size of hole is the minimum diameter of holes in clearance fits.
Minimum clearance - (Measured in Meter) - Minimum clearance is the minimum width of gap present between two given surfaces in clearance fits.
STEP 1: Convert Input(s) to Base Unit
Minimum limit size of hole: 6.5 Millimeter --> 0.0065 Meter (Check conversion here)
Minimum clearance: 3.5 Millimeter --> 0.0035 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Smax = Hmin-Cmin --> 0.0065-0.0035
Evaluating ... ...
Smax = 0.003
STEP 3: Convert Result to Output's Unit
0.003 Meter -->3 Millimeter (Check conversion here)
FINAL ANSWER
3 Millimeter <-- Maximum Limit Size of shaft
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

7 Clearance fits Calculators

Maximum limit size of shaft from minimum clearance
Go Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance
Minimum limit size of shaft from maximum clearance
Go Minimum limit size of shaft = Maximum limit size of hole-Maximum clearance
Minimum limit size of hole from minimum clearance
Go Minimum limit size of hole = Minimum clearance+Maximum Limit Size of shaft
Maximum limit size of hole from maximum clearance
Go Maximum limit size of hole = Maximum clearance+Minimum limit size of shaft
Maximum Clearance
Go Maximum clearance = Maximum limit size of hole-Minimum limit size of shaft
Minimum clearance
Go Minimum clearance = Minimum limit size of hole-Maximum Limit Size of shaft
Tolerance Unit
Go Tolerance Unit = 0.45*(Cylinder Dimension)^(1/3)+0.001*Cylinder Dimension

Maximum limit size of shaft from minimum clearance Formula

Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance
Smax = Hmin-Cmin

What is Clearance fit ?

The maximum size of the shaft is smaller than the minimum hole and as a result,
there will always be clearance, varying depending upon the actual sizes of the shaft and hole. Such a fit is termed as clearance fit.

How to Calculate Maximum limit size of shaft from minimum clearance?

Maximum limit size of shaft from minimum clearance calculator uses Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance to calculate the Maximum Limit Size of shaft, The Maximum limit size of shaft from minimum clearance formula is defined as the maximum diameter of shaft possible for given fit. Maximum Limit Size of shaft is denoted by Smax symbol.

How to calculate Maximum limit size of shaft from minimum clearance using this online calculator? To use this online calculator for Maximum limit size of shaft from minimum clearance, enter Minimum limit size of hole (Hmin) & Minimum clearance (Cmin) and hit the calculate button. Here is how the Maximum limit size of shaft from minimum clearance calculation can be explained with given input values -> 3000 = 0.0065-0.0035.

FAQ

What is Maximum limit size of shaft from minimum clearance?
The Maximum limit size of shaft from minimum clearance formula is defined as the maximum diameter of shaft possible for given fit and is represented as Smax = Hmin-Cmin or Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance. Minimum limit size of hole is the minimum diameter of holes in clearance fits & Minimum clearance is the minimum width of gap present between two given surfaces in clearance fits.
How to calculate Maximum limit size of shaft from minimum clearance?
The Maximum limit size of shaft from minimum clearance formula is defined as the maximum diameter of shaft possible for given fit is calculated using Maximum Limit Size of shaft = Minimum limit size of hole-Minimum clearance. To calculate Maximum limit size of shaft from minimum clearance, you need Minimum limit size of hole (Hmin) & Minimum clearance (Cmin). With our tool, you need to enter the respective value for Minimum limit size of hole & Minimum clearance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!