Maximum Shear Stress in Parallel Fillet Weld given Load Solution

STEP 0: Pre-Calculation Summary
Formula Used
Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
𝜏 = P/(0.707*L*hl)
This formula uses 4 Variables
Variables Used
Shear stress in parallel fillet weld - (Measured in Pascal) - Shear stress in parallel fillet weld is the force tending to cause deformation of the fillet weld by slippage along a plane or planes parallel to the imposed stress.
Load on Parallel Fillet Weld - (Measured in Newton) - Load on parallel fillet weld is the force or the load applied perpendicular to the specimen cross-section.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
STEP 1: Convert Input(s) to Base Unit
Load on Parallel Fillet Weld: 111080 Newton --> 111080 Newton No Conversion Required
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
𝜏 = P/(0.707*L*hl) --> 111080/(0.707*0.195*0.0212)
Evaluating ... ...
𝜏 = 38005459.2645663
STEP 3: Convert Result to Output's Unit
38005459.2645663 Pascal -->38.0054592645663 Newton per Square Millimeter (Check conversion here)
FINAL ANSWER
38.0054592645663 38.00546 Newton per Square Millimeter <-- Shear stress in parallel fillet weld
(Calculation completed in 00.004 seconds)

Credits

Created by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has created this Calculator and 300+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

15 Parallel Fillet Welds Calculators

Length of Parallel Fillet Weld given Shear Stress and Weld Cut Angle
Go Length of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Leg of Weld*Shear stress in parallel fillet weld)
Leg of Parallel Fillet Weld given Shear Stress and Weld Cut Angle
Go Leg of Weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Shear stress in parallel fillet weld)
Shear Stress in Parallel Fillet Weld given Load
Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Leg of Weld)
Force in Parallel Fillet Weld given Shear Stress
Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
Length of Parallel Fillet Weld given Shear Stress
Go Length of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Leg of Weld*cos(pi/4))
Leg of Parallel Fillet Weld given Shear Stress
Go Leg of Weld = Load on Parallel Fillet Weld/(Shear stress in parallel fillet weld*Length of Weld*cos(pi/4))
Shear Stress Parallel Fillet Weld
Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(Length of Weld*Leg of Weld*cos(pi/4))
Width of Plane in Double Parallel Fillet Weld
Go Plane Width in Double Parallel Fillet Weld = Leg of Weld/(sin(Weld Cut Angle)+cos(Weld Cut Angle))
Maximum Shear Stress in Parallel Fillet Weld given Load
Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
Shear Stress in Parallel Fillet Weld
Go Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
Tensile Force on Parallel Fillet Weld Plate given Shear Stress
Go Load on Parallel Fillet Weld = Shear stress in parallel fillet weld*Length of Weld*Leg of Weld*0.707
Shear Stress in Double Parallel Fillet Weld
Go Shearing Stress = Load on Double Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
Allowable Load in Parallel Fillet Weld per Unit Length
Go Allowable Load per unit Length of Weld = 0.707*Shear stress in parallel fillet weld*Leg of Weld
Leg of Parallel Fillet Weld given Throat of Weld
Go Leg of Weld = Throat Thickness of Weld/cos(pi/4)
Throat of Parallel Fillet Weld
Go Throat Thickness of Weld = Leg of Weld*cos(pi/4)

Maximum Shear Stress in Parallel Fillet Weld given Load Formula

Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
𝜏 = P/(0.707*L*hl)

What is Shear Stress?

A type of stress that acts coplanar with a cross-section of material. Shear stress arises due to shear forces. They are the pair of forces acting on opposite sides of a body with the same magnitude and opposite direction. Shear stress is a vector quantity. This means, here the direction is also involved along with magnitude.

How to Calculate Maximum Shear Stress in Parallel Fillet Weld given Load?

Maximum Shear Stress in Parallel Fillet Weld given Load calculator uses Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld) to calculate the Shear stress in parallel fillet weld, Maximum Shear Stress in Parallel Fillet Weld given Load is the stress that is generated in the plane of the parallel fillet weld when the inclination (θ) of the plane in the weld is 45°. Shear stress in parallel fillet weld is denoted by 𝜏 symbol.

How to calculate Maximum Shear Stress in Parallel Fillet Weld given Load using this online calculator? To use this online calculator for Maximum Shear Stress in Parallel Fillet Weld given Load, enter Load on Parallel Fillet Weld (P), Length of Weld (L) & Leg of Weld (hl) and hit the calculate button. Here is how the Maximum Shear Stress in Parallel Fillet Weld given Load calculation can be explained with given input values -> 3.8E-5 = 111080/(0.707*0.195*0.0212).

FAQ

What is Maximum Shear Stress in Parallel Fillet Weld given Load?
Maximum Shear Stress in Parallel Fillet Weld given Load is the stress that is generated in the plane of the parallel fillet weld when the inclination (θ) of the plane in the weld is 45° and is represented as 𝜏 = P/(0.707*L*hl) or Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld). Load on parallel fillet weld is the force or the load applied perpendicular to the specimen cross-section, The Length of Weld is the linear distance of the welding segment joined by the welded joint & The Leg of Weld is the distance from the joint root to the toe of the weld.
How to calculate Maximum Shear Stress in Parallel Fillet Weld given Load?
Maximum Shear Stress in Parallel Fillet Weld given Load is the stress that is generated in the plane of the parallel fillet weld when the inclination (θ) of the plane in the weld is 45° is calculated using Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld). To calculate Maximum Shear Stress in Parallel Fillet Weld given Load, you need Load on Parallel Fillet Weld (P), Length of Weld (L) & Leg of Weld (hl). With our tool, you need to enter the respective value for Load on Parallel Fillet Weld, Length of Weld & Leg of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Shear stress in parallel fillet weld?
In this formula, Shear stress in parallel fillet weld uses Load on Parallel Fillet Weld, Length of Weld & Leg of Weld. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(0.707*Length of Weld*Leg of Weld)
  • Shear stress in parallel fillet weld = Load on Parallel Fillet Weld/(Length of Weld*Leg of Weld*cos(pi/4))
  • Shear stress in parallel fillet weld = Load on Parallel Fillet Weld*(sin(Weld Cut Angle)+cos(Weld Cut Angle))/(Length of Weld*Leg of Weld)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!