Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations Solution

STEP 0: Pre-Calculation Summary
Formula Used
Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
G = sqrt(P/(μviscosity*V))
This formula uses 1 Functions, 4 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Mean velocity gradient - (Measured in 1 Per Second) - Mean velocity gradient is the difference in velocity between adjacent layers of the fluid.
Power requirement - (Measured in Watt) - Power requirement is the amount of energy transferred or converted per unit time.
Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.
Volume of Tank - (Measured in Cubic Meter) - Volume of tank is defined as the capacity of flocculation and mixing tank.
STEP 1: Convert Input(s) to Base Unit
Power requirement: 3 Kilojoule per Second --> 3000 Watt (Check conversion here)
Dynamic Viscosity: 10.2 Poise --> 1.02 Pascal Second (Check conversion here)
Volume of Tank: 9 Cubic Meter --> 9 Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
G = sqrt(P/(μviscosity*V)) --> sqrt(3000/(1.02*9))
Evaluating ... ...
G = 18.0775381515547
STEP 3: Convert Result to Output's Unit
18.0775381515547 1 Per Second --> No Conversion Required
FINAL ANSWER
18.0775381515547 18.07754 1 Per Second <-- Mean velocity gradient
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

19 Design of Rapid Mix Basin and Flocculation Basin Calculators

Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Mean Velocity Gradient given Power Requirement for Flocculation
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Mean Velocity Gradient given Power Requirement
Go Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Flow Rate of Secondary Effluent given Volume of Flocculation Basin
Go Flow rate of secondary effluent = (Volume of Tank*Time in min per day)/Retention Time
Time in Minutes Per Day given Volume of Flocculation Basin
Go Time in min per day = (Retention Time*Flow rate of secondary effluent)/Volume of Tank
Retention Time given Volume of Flocculation Basin
Go Retention Time = (Volume of Tank*Time in min per day)/Flow rate of secondary effluent
Required Volume of Flocculation Basin
Go Volume of Tank = (Retention Time*Flow rate of secondary effluent)/Time in min per day
Volume of Mixing Tank given Power Requirement for Rapid Mixing Operations
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Power Requirement for Rapid Mixing Operations
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Volume of Flocculation Basin given power requirement for flocculation
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Power Requirement for Flocculation
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Volume of Mixing Tank given Mean Velocity Gradient
Go Volume of Tank = (Power requirement/((Mean velocity gradient)^2*Dynamic Viscosity))
Dynamic Viscosity given Mean Velocity Gradient
Go Dynamic Viscosity = (Power requirement/((Mean velocity gradient)^2*Volume of Tank))
Power Requirement for Rapid Mixing Operations in Wastewater Treatment
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Power Requirement for Flocculation in Direct Filtration Process
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Power Requirement given Mean Velocity Gradient
Go Power requirement = (Mean velocity gradient)^2*Dynamic Viscosity*Volume of Tank
Hydraulic Retention Time given Volume of Rapid Mix Basin
Go Hydraulic Retention Time = Volume of Rapid mix Basin/Waste water flow
Wastewater Flow given Volume of Rapid Mix Basin
Go Waste water flow = Volume of Rapid mix Basin/Hydraulic Retention Time
Volume of Rapid Mix Basin
Go Volume of Rapid mix Basin = Hydraulic Retention Time*Waste water flow

Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations Formula

Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
G = sqrt(P/(μviscosity*V))

What is mean velocity gradient ?

In systems of stirring, the velocity of the fluid varies both spatially (from point to point) and temporally (from time to time). The spatial changes in velocity are identified by a velocity gradient, G.

How to Calculate Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations?

Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations calculator uses Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank)) to calculate the Mean velocity gradient, The Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations calculates the mean velocity gradient when we have prior information of power , viscosity and volume of tank. Mean velocity gradient is denoted by G symbol.

How to calculate Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations using this online calculator? To use this online calculator for Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations, enter Power requirement (P), Dynamic Viscosity viscosity) & Volume of Tank (V) and hit the calculate button. Here is how the Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations calculation can be explained with given input values -> 18.07754 = sqrt(3000/(1.02*9)).

FAQ

What is Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations?
The Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations calculates the mean velocity gradient when we have prior information of power , viscosity and volume of tank and is represented as G = sqrt(P/(μviscosity*V)) or Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank)). Power requirement is the amount of energy transferred or converted per unit time, The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied & Volume of tank is defined as the capacity of flocculation and mixing tank.
How to calculate Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations?
The Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations calculates the mean velocity gradient when we have prior information of power , viscosity and volume of tank is calculated using Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank)). To calculate Mean Velocity Gradient given Power Requirement for Rapid Mixing Operations, you need Power requirement (P), Dynamic Viscosity viscosity) & Volume of Tank (V). With our tool, you need to enter the respective value for Power requirement, Dynamic Viscosity & Volume of Tank and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Mean velocity gradient?
In this formula, Mean velocity gradient uses Power requirement, Dynamic Viscosity & Volume of Tank. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
  • Mean velocity gradient = sqrt(Power requirement/(Dynamic Viscosity*Volume of Tank))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!