Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud
tf = 1.25*d
This formula uses 2 Variables
Variables Used
Thickness of Cylinder Flange - (Measured in Meter) - Thickness of cylinder flange is the thickness of the flange used in an engine cylinder assembly.
Nominal Diameter of Cylinder Head Stud - (Measured in Meter) - Nominal Diameter of Cylinder Head Stud is the smallest diameter of the thread of an engine cylinder head stud.
STEP 1: Convert Input(s) to Base Unit
Nominal Diameter of Cylinder Head Stud: 23.5 Millimeter --> 0.0235 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tf = 1.25*d --> 1.25*0.0235
Evaluating ... ...
tf = 0.029375
STEP 3: Convert Result to Output's Unit
0.029375 Meter -->29.375 Millimeter (Check conversion here)
FINAL ANSWER
29.375 Millimeter <-- Thickness of Cylinder Flange
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

10+ Emperical Relation for Cylinder Calculators

Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud
Go Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud
Maximum Thickness of Cylinder Flange given Nominal Diameter of Stud
Go Thickness of Cylinder Flange = 1.5*Nominal Diameter of Cylinder Head Stud
Thickness of Engine Cylinder Wall given Cylinder Inner Diameter
Go Thickness of Cylinder Wall = 0.045*Inner Diameter of Engine Cylinder+1.60
Water Space between Outer Cylinder Wall and Inner Jacket Wall
Go Water Space for Coolant = 0.08*Inner Diameter of Engine Cylinder+6.5
Maximum Thickness of Water Jacket Wall
Go Thickness of Water Jacket Wall = 0.75*Thickness of Cylinder Wall
Maximum Thickness of Dry Liner
Go Thickness of Dry Liner = 0.035*Inner Diameter of Engine Cylinder
Minimum Thickness of Dry Liner
Go Thickness of Dry Liner = 0.03*Inner Diameter of Engine Cylinder
Minimum Thickness of Cylinder Flange given Thickness of Cylinder Wall
Go Thickness of Cylinder Flange = 1.2*Thickness of Cylinder Wall
Maximum Thickness of Cylinder Flange given Thickness of Cylinder Wall
Go Thickness of Cylinder Flange = 1.4*Thickness of Cylinder Wall
Minimum Thickness of Water Jacket Wall
Go Thickness of Water Jacket Wall = Thickness of Cylinder Wall/3

Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud Formula

Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud
tf = 1.25*d

Types of flanges

The key types of flanges are the welding neck, long welding neck, slip-on, socket weld, lap joint, threaded, and blind flanges. In addition to these standard flanges, some special ones exist, called Weldoflange/Nipoflange and Elboflange, swivel flange, expander/reducer flange, and orifice flanges.

How to Calculate Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud?

Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud calculator uses Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud to calculate the Thickness of Cylinder Flange, Minimum thickness of cylinder flange given nominal diameter of stud is the minimum thickness of the flange used in an engine cylinder assembly. Thickness of Cylinder Flange is denoted by tf symbol.

How to calculate Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud using this online calculator? To use this online calculator for Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud, enter Nominal Diameter of Cylinder Head Stud (d) and hit the calculate button. Here is how the Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud calculation can be explained with given input values -> 29375 = 1.25*0.0235.

FAQ

What is Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud?
Minimum thickness of cylinder flange given nominal diameter of stud is the minimum thickness of the flange used in an engine cylinder assembly and is represented as tf = 1.25*d or Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud. Nominal Diameter of Cylinder Head Stud is the smallest diameter of the thread of an engine cylinder head stud.
How to calculate Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud?
Minimum thickness of cylinder flange given nominal diameter of stud is the minimum thickness of the flange used in an engine cylinder assembly is calculated using Thickness of Cylinder Flange = 1.25*Nominal Diameter of Cylinder Head Stud. To calculate Minimum Thickness of Cylinder Flange given Nominal Diameter of Stud, you need Nominal Diameter of Cylinder Head Stud (d). With our tool, you need to enter the respective value for Nominal Diameter of Cylinder Head Stud and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickness of Cylinder Flange?
In this formula, Thickness of Cylinder Flange uses Nominal Diameter of Cylinder Head Stud. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Thickness of Cylinder Flange = 1.2*Thickness of Cylinder Wall
  • Thickness of Cylinder Flange = 1.4*Thickness of Cylinder Wall
  • Thickness of Cylinder Flange = 1.5*Nominal Diameter of Cylinder Head Stud
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!