Molarity given Acidity and Normality Solution

STEP 0: Pre-Calculation Summary
Formula Used
Molarity = Normality/Acidity
Mol = N/pH
This formula uses 3 Variables
Variables Used
Molarity - (Measured in Mole per Cubic Meter) - Molarity of a given solution is defined as the total number of moles of solute per litre of solution.
Normality - (Measured in Mole per Cubic Meter) - Normality is the weight of solute dissolved in a liter of solution.
Acidity - Acidity describes the amount of acid in a substance. An acid is a chemical that gives off hydrogen ions in water and forms salts by combining them with certain metals. Acidity is measured on pH scale.
STEP 1: Convert Input(s) to Base Unit
Normality: 12 Equivalents per Liter --> 12000 Mole per Cubic Meter (Check conversion here)
Acidity: 4.5 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Mol = N/pH --> 12000/4.5
Evaluating ... ...
Mol = 2666.66666666667
STEP 3: Convert Result to Output's Unit
2666.66666666667 Mole per Cubic Meter -->2.66666666666667 Mole per Liter (Check conversion here)
FINAL ANSWER
2.66666666666667 2.666667 Mole per Liter <-- Molarity
(Calculation completed in 00.004 seconds)

Credits

Created by Shivam Sinha
National Institute Of Technology (NIT), Surathkal
Shivam Sinha has created this Calculator and 300+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

22 Concentration Terms Calculators

Molarity using Mole Fraction
Go Molarity = (Mole Fraction of Solute*Density of water*1000)/(Mole Fraction of Solvent*Molar Mass of Solvent+Mole Fraction of Solute*Molar Mass of Solute)
Mole Fraction of Solute given Molarity
Go Mole Fraction of Solute in terms of Molarity = (Molarity*Molar Mass of Solvent*1000)/((Density of Solution*1000)-(Molarity*Molar Mass of Solute))
Molarity given Molality of Solution
Go Molarity when Molality of Solution is given = (Molality*Density of Solution*1000)/(1000+( Molality*Molar Mass of Solute))
Mole Fraction of Solvent
Go Mole Fraction of Solvent = Number of Moles of Solvent in Solution/(Number of Moles of Solute in Solution+Number of Moles of Solvent in Solution)
Mole Fraction of Solute
Go Mole Fraction of Solute = Number of Moles of Solute in Solution/(Number of Moles of Solute in Solution+Number of Moles of Solvent in Solution)
Mole Fraction using Molarity
Go Mole Fraction of Solute = (Molarity*Molar Mass of Solvent*1000)/(1000*Density of water*Molar Mass of Solute)
Mole Fraction using Molality
Go Mole Fraction of Solute = (Molality*Molar Mass of Solvent)/(1000+Molality*Molar Mass of Solvent)
Mole Fraction of Component 1 in Binary Solution
Go Mole fraction of component 1 = Moles of Component 1/(Moles of Component 1+Moles of component 2)
Molarity using Molality
Go Molarity = Density of water/((1/Molality)+(Molecular Mass Solute/1000))
Molarity of Substance
Go Molarity = Mass of Solute/(Molecular Mass Solute*Volume of Solution)
Molarity given Normality and Equivalent Mass
Go Molarity = Normality*(Equivalent Weight/Molar Mass in Kilogram)
Mole Fraction of Solvent given Molality
Go Mole Fraction of Solvent = 1000/(1000+(Molality*Molar Mass of Solvent))
Number of Moles of Solute using Molarity
Go Number of Moles of Acid or Base = Molarity*Volume of Solution
Molarity
Go Molarity = Number of Moles of Solute/Volume of Solution
Number of Moles of Solute using Molality
Go Number of Moles of Solute = Molality*Mass of Solvent
Mass of Solvent using Molality
Go Mass of Solvent = Number of Moles of Solute/Molality
Molarity given Normality and Number of Equivalents
Go Molarity = Normality/Number of Equivalents
Molarity using Normality and Valency Factor
Go Molarity = Normality/N Factor
Molarity given basicity and normality
Go Molarity = Normality/Basicity
Molarity given Acidity and Normality
Go Molarity = Normality/Acidity
Molarity using Volume Strength of Hydrogen Peroxide
Go Molarity = Volume Strength/11.2
Volume Strength using Molarity
Go Volume Strength = 11.2*Molarity

Molarity given Acidity and Normality Formula

Molarity = Normality/Acidity
Mol = N/pH

What is normality?

Normality is described as the number of gram or mole equivalents of solute present in one liter of a solution. When we say equivalent, it is the number of moles of reactive units in a compound. Normality in chemistry is one of the expressions used to measure the concentration of a solution. It is abbreviated as ‘N’ and is sometimes referred to as the equivalent concentration of a solution. It is mainly used as a measure of reactive species in a solution and during titration reactions or particularly in situations involving acid-base chemistry.

What is acidity?

Acidity describes the amount of acid in a substance. An acid is a chemical that gives off hydrogen ions in water and forms salts by combining them with certain metals. Acidity is measured on a scale called the pH scale. On this scale, a pH value of 7 is neutral, and a pH value of less than 7 to 0 shows increasing acidity.

How to Calculate Molarity given Acidity and Normality?

Molarity given Acidity and Normality calculator uses Molarity = Normality/Acidity to calculate the Molarity, The Molarity given acidity and normality formula is defined as the ratio of normality of the solution to the acidity of the solution. Molarity is denoted by Mol symbol.

How to calculate Molarity given Acidity and Normality using this online calculator? To use this online calculator for Molarity given Acidity and Normality, enter Normality (N) & Acidity (pH) and hit the calculate button. Here is how the Molarity given Acidity and Normality calculation can be explained with given input values -> 0.002667 = 12000/4.5.

FAQ

What is Molarity given Acidity and Normality?
The Molarity given acidity and normality formula is defined as the ratio of normality of the solution to the acidity of the solution and is represented as Mol = N/pH or Molarity = Normality/Acidity. Normality is the weight of solute dissolved in a liter of solution & Acidity describes the amount of acid in a substance. An acid is a chemical that gives off hydrogen ions in water and forms salts by combining them with certain metals. Acidity is measured on pH scale.
How to calculate Molarity given Acidity and Normality?
The Molarity given acidity and normality formula is defined as the ratio of normality of the solution to the acidity of the solution is calculated using Molarity = Normality/Acidity. To calculate Molarity given Acidity and Normality, you need Normality (N) & Acidity (pH). With our tool, you need to enter the respective value for Normality & Acidity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Molarity?
In this formula, Molarity uses Normality & Acidity. We can use 9 other way(s) to calculate the same, which is/are as follows -
  • Molarity = Normality/N Factor
  • Molarity = Mass of Solute/(Molecular Mass Solute*Volume of Solution)
  • Molarity = Number of Moles of Solute/Volume of Solution
  • Molarity = Density of water/((1/Molality)+(Molecular Mass Solute/1000))
  • Molarity = (Mole Fraction of Solute*Density of water*1000)/(Mole Fraction of Solvent*Molar Mass of Solvent+Mole Fraction of Solute*Molar Mass of Solute)
  • Molarity = Volume Strength/11.2
  • Molarity = Normality/Basicity
  • Molarity = Normality*(Equivalent Weight/Molar Mass in Kilogram)
  • Molarity = Normality/Number of Equivalents
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!