Moment on Fixed End of Fixed Beam having UDL over Entire Length Solution

STEP 0: Pre-Calculation Summary
Formula Used
Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12
FEM = (w*(L^2))/12
This formula uses 3 Variables
Variables Used
Fixed End Moment - (Measured in Newton Meter) - The fixed end moments are reaction moments developed in a beam member under certain load conditions with both ends fixed.
Load per Unit Length - (Measured in Newton per Meter) - Load per Unit Length is the load distributed per unit meter.
Length of Beam - (Measured in Meter) - Length of Beam is defined as the distance between the supports.
STEP 1: Convert Input(s) to Base Unit
Load per Unit Length: 67.46 Kilonewton per Meter --> 67460 Newton per Meter (Check conversion here)
Length of Beam: 2600 Millimeter --> 2.6 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
FEM = (w*(L^2))/12 --> (67460*(2.6^2))/12
Evaluating ... ...
FEM = 38002.4666666667
STEP 3: Convert Result to Output's Unit
38002.4666666667 Newton Meter -->38.0024666666667 Kilonewton Meter (Check conversion here)
FINAL ANSWER
38.0024666666667 38.00247 Kilonewton Meter <-- Fixed End Moment
(Calculation completed in 00.004 seconds)

Credits

Created by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has created this Calculator and 100+ more calculators!
Verified by Mayank Tayal
National Institute of Technology (NIT), Durgapur
Mayank Tayal has verified this Calculator and 10+ more calculators!

18 Beam Moments Calculators

Bending Moment of Simply Supported Beam Carrying UDL
Go Bending Moment = ((Load per Unit Length*Length of Beam*Distance x from Support)/2)-(Load per Unit Length*(Distance x from Support^2)/2)
Fixed End Moment at Left Support with Couple at Distance A
Go Fixed End Moment = (Moment of Couple*Distance from Support B*(2*Distance from Support A-Distance from Support B))/(Length of Beam^2)
Fixed End Moment at Left Support with Point Load at Certain Distance from Left Support
Go Fixed End Moment = ((Point Load*(Distance from Support B^2)*Distance from Support A)/(Length of Beam^2))
Maximum Bending Moment of Simply Supported Beam with Point Load at Distance 'a' from Left Support
Go Bending Moment = (Point Load*Distance from Support A*Distance from Support B)/Length of Beam
Maximum Bending Moment of Simply Supported Beams with Uniformly Varying Load
Go Bending Moment = (Uniformly Varying Load*Length of Beam^2)/(9*sqrt(3))
Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End
Go Bending Moment = ((Load per Unit Length*Distance x from Support^2)/2)
Moment on Fixed End of Fixed Beam Carrying Uniform Varying Load
Go Fixed End Moment = (5*Uniformly Varying Load*(Length of Beam^2))/96
Fixed End Moment at Left Support Carrying Right Angled Triangular Load at Right Angled End A
Go Fixed End Moment = (Uniformly Varying Load*(Length of Beam^2))/20
Moment on Fixed End of Fixed Beam having UDL over Entire Length
Go Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12
Maximum Bending Moment of Simply Supported Beam with Uniformly Distributed Load
Go Bending Moment = (Load per Unit Length*Length of Beam^2)/8
Maximum Bending Moment of Cantilever Subject to UDL over Entire Span
Go Bending Moment = (Load per Unit Length*Length of Beam^2)/2
Bending Moment of Simply Supported Beam Subjected to Point Load at Mid-Point
Go Bending Moment = ((Point Load*Distance x from Support)/2)
Fixed End Moment of Fixed Beam Carrying Three Equi-spaced Point Loads
Go Fixed End Moment = (15*Point Load*Length of Beam)/48
Moment on Fixed End of Fixed Beam carrying Two Equi Spaced Point Loads
Go Fixed End Moment = (2*Point Load*Length of Beam)/9
Moment on Fixed End of Fixed Beam having Point Load at Center
Go Fixed End Moment = (Point Load*Length of Beam)/8
Maximum Bending Moment of Overhanging Beam Subjected to Concentrated Load at Free End
Go Bending Moment = -Point Load*Length of Overhang
Maximum Bending Moment of Simply Supported Beams with Point Load at Centre
Go Bending Moment = (Point Load*Length of Beam)/4
Maximum Bending Moment of Cantilever Beam Subjected to Point Load at Free End
Go Bending Moment = Point Load*Length of Beam

Moment on Fixed End of Fixed Beam having UDL over Entire Length Formula

Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12
FEM = (w*(L^2))/12

What is Fixed End Moment of a Fixed Beam having UDL over its Entire Length?

The Fixed End Moment of a Fixed Beam having UDL over its Entire Length are reaction moments developed in the supports under Uniformly Distributed Load with both ends fixed.

How to Calculate Moment on Fixed End of Fixed Beam having UDL over Entire Length?

Moment on Fixed End of Fixed Beam having UDL over Entire Length calculator uses Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12 to calculate the Fixed End Moment, The Moment on Fixed End of Fixed Beam having UDL over Entire Length formula is defined as the uniformly distributed load multiplied by the length of the beam which is fixed. Fixed End Moment is denoted by FEM symbol.

How to calculate Moment on Fixed End of Fixed Beam having UDL over Entire Length using this online calculator? To use this online calculator for Moment on Fixed End of Fixed Beam having UDL over Entire Length, enter Load per Unit Length (w) & Length of Beam (L) and hit the calculate button. Here is how the Moment on Fixed End of Fixed Beam having UDL over Entire Length calculation can be explained with given input values -> 0.038002 = (67460*(2.6^2))/12.

FAQ

What is Moment on Fixed End of Fixed Beam having UDL over Entire Length?
The Moment on Fixed End of Fixed Beam having UDL over Entire Length formula is defined as the uniformly distributed load multiplied by the length of the beam which is fixed and is represented as FEM = (w*(L^2))/12 or Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12. Load per Unit Length is the load distributed per unit meter & Length of Beam is defined as the distance between the supports.
How to calculate Moment on Fixed End of Fixed Beam having UDL over Entire Length?
The Moment on Fixed End of Fixed Beam having UDL over Entire Length formula is defined as the uniformly distributed load multiplied by the length of the beam which is fixed is calculated using Fixed End Moment = (Load per Unit Length*(Length of Beam^2))/12. To calculate Moment on Fixed End of Fixed Beam having UDL over Entire Length, you need Load per Unit Length (w) & Length of Beam (L). With our tool, you need to enter the respective value for Load per Unit Length & Length of Beam and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Fixed End Moment?
In this formula, Fixed End Moment uses Load per Unit Length & Length of Beam. We can use 7 other way(s) to calculate the same, which is/are as follows -
  • Fixed End Moment = (Point Load*Length of Beam)/8
  • Fixed End Moment = ((Point Load*(Distance from Support B^2)*Distance from Support A)/(Length of Beam^2))
  • Fixed End Moment = (Uniformly Varying Load*(Length of Beam^2))/20
  • Fixed End Moment = (5*Uniformly Varying Load*(Length of Beam^2))/96
  • Fixed End Moment = (2*Point Load*Length of Beam)/9
  • Fixed End Moment = (15*Point Load*Length of Beam)/48
  • Fixed End Moment = (Moment of Couple*Distance from Support B*(2*Distance from Support A-Distance from Support B))/(Length of Beam^2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!