Normality given Molarity and Basicity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Normality = Molarity*Basicity
N = Mol*Basicity
This formula uses 3 Variables
Variables Used
Normality - (Measured in Mole per Cubic Meter) - Normality is the weight of solute dissolved in a liter of solution.
Molarity - (Measured in Mole per Cubic Meter) - Molarity of a given solution is defined as the total number of moles of solute per litre of solution.
Basicity - Basicity is the quality of being a base (not an acid). A base is a substance that can accept hydrogen ions in water and can neutralize an acid.
STEP 1: Convert Input(s) to Base Unit
Molarity: 55.5 Mole per Liter --> 55500 Mole per Cubic Meter (Check conversion here)
Basicity: 3 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
N = Mol*Basicity --> 55500*3
Evaluating ... ...
N = 166500
STEP 3: Convert Result to Output's Unit
166500 Mole per Cubic Meter -->166.5 Equivalents per Liter (Check conversion here)
FINAL ANSWER
166.5 Equivalents per Liter <-- Normality
(Calculation completed in 00.004 seconds)

Credits

Created by Shivam Sinha
National Institute Of Technology (NIT), Surathkal
Shivam Sinha has created this Calculator and 300+ more calculators!
Verified by Akshada Kulkarni
National Institute of Information Technology (NIIT), Neemrana
Akshada Kulkarni has verified this Calculator and 900+ more calculators!

23 Number of Equivalents and Normality Calculators

Normality of substance 1 at Equivalence point
Go Normality of Solution 1 = Normality of Solution 2*(Volume of Solution 2/Volume of Solution 1)
Normality of substance 2 at Equivalence point
Go Normality of Solution 2 = Normality of Solution 1*(Volume of Solution 1/Volume of Solution 2)
Volume of Substance 1 at Equivalence Point
Go Volume of Solution 1 = Normality of Solution 2*(Volume of Solution 2/Normality of Solution 1)
Volume of substance 2 at equivalence point
Go Volume of Solution 2 = Normality of Solution 1*(Volume of Solution 1/Normality of Solution 2)
Equivalent Mass given Molality and Normality
Go Equivalent Weight = Molarity*(Molar Mass/Normality)
Normality given Molality and Equivalent Mass
Go Normality = Molarity*(Molar Mass/Equivalent Weight)
Number of Moles of Solute given Number of Equivalents of Solute
Go Number of Moles of Solute = Number of Equivalents/N Factor
Number of Equivalents of Solute using Valency Factor
Go Number of Equivalents = Number of Moles of Solute*N Factor
Valency Factor given Number of Equivalents of Solute
Go N Factor = Number of Equivalents/Number of Moles of Solute
Number of Equivalents of Solute
Go Number of Equivalents = Mass of Solute/Equivalent Weight
Number of Equivalents of Solute given Normality
Go Number of Equivalents = Normality*Volume of Solution
Volume of Solution given Normality
Go Volume of Solution = Number of Equivalents/Normality
Normality
Go Normality = Equivalent of Solute/Liters of Solution
Number of Equivalents given Molarity and Normality
Go Number of Equivalents = Normality/Molarity
Normality given Molarity and Number of Equivalents
Go Normality = Molarity*Number of Equivalents
Normality given Molarity and Valency Factor
Go Normality = Molarity*N Factor
Valency Factor using Molarity and Normality
Go N Factor = Normality/Molarity
Basicity given Molarity and Normality
Go Basicity = Normality/Molarity
Normality given Molarity and Basicity
Go Normality = Molarity*Basicity
Acidity given Molarity and Normality
Go Acidity = Normality/Molarity
Normality given Molarity and Acidity
Go Normality = Molarity*Acidity
Normality using Volume Strength of Hydrogen Peroxide
Go Normality = Volume Strength/5.6
Volume Strength using Normality
Go Volume Strength = 5.6*Normality

Normality given Molarity and Basicity Formula

Normality = Molarity*Basicity
N = Mol*Basicity

What is molarity?

Molarity is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution. It is denoted by the symbol M. The units of molarity are M or mol/L. A 1 M solution is said to be “one molar.”

What is basicity?

Basicity is the quality of being a base (not an acid). A base is a substance that can accept hydrogen ions in water and can neutralize an acid. Basicity is measured on a scale called the pH scale. On this scale, a pH value of 7 is neutral, and a pH value of more than 7 to 14 shows increasing basicity.

How to Calculate Normality given Molarity and Basicity?

Normality given Molarity and Basicity calculator uses Normality = Molarity*Basicity to calculate the Normality, The Normality given molarity and basicity formula is defined as the product of the molarity of the solution and the basicity of the solution. Normality is denoted by N symbol.

How to calculate Normality given Molarity and Basicity using this online calculator? To use this online calculator for Normality given Molarity and Basicity, enter Molarity (Mol) & Basicity (Basicity) and hit the calculate button. Here is how the Normality given Molarity and Basicity calculation can be explained with given input values -> 0.1665 = 55500*3.

FAQ

What is Normality given Molarity and Basicity?
The Normality given molarity and basicity formula is defined as the product of the molarity of the solution and the basicity of the solution and is represented as N = Mol*Basicity or Normality = Molarity*Basicity. Molarity of a given solution is defined as the total number of moles of solute per litre of solution & Basicity is the quality of being a base (not an acid). A base is a substance that can accept hydrogen ions in water and can neutralize an acid.
How to calculate Normality given Molarity and Basicity?
The Normality given molarity and basicity formula is defined as the product of the molarity of the solution and the basicity of the solution is calculated using Normality = Molarity*Basicity. To calculate Normality given Molarity and Basicity, you need Molarity (Mol) & Basicity (Basicity). With our tool, you need to enter the respective value for Molarity & Basicity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Normality?
In this formula, Normality uses Molarity & Basicity. We can use 6 other way(s) to calculate the same, which is/are as follows -
  • Normality = Molarity*N Factor
  • Normality = Volume Strength/5.6
  • Normality = Molarity*(Molar Mass/Equivalent Weight)
  • Normality = Molarity*Acidity
  • Normality = Molarity*Number of Equivalents
  • Normality = Equivalent of Solute/Liters of Solution
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!