Nose Radius of Tool from Surface Finish Constraint Solution

STEP 0: Pre-Calculation Summary
Formula Used
Nose Radius = 0.0321/Constraint on Feed
rnose = 0.0321/Cs
This formula uses 2 Variables
Variables Used
Nose Radius - (Measured in Meter) - Nose Radius is any of the line segments from its center to its perimeter, and in more modern usage, it is also their length.
Constraint on Feed - (Measured in 1 per Meter) - Constraint on Feed is the maximum feed that can be used while machining.
STEP 1: Convert Input(s) to Base Unit
Constraint on Feed: 0.3 1 per Meter --> 0.3 1 per Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
rnose = 0.0321/Cs --> 0.0321/0.3
Evaluating ... ...
rnose = 0.107
STEP 3: Convert Result to Output's Unit
0.107 Meter --> No Conversion Required
FINAL ANSWER
0.107 Meter <-- Nose Radius
(Calculation completed in 00.004 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

10+ Mechanics of Orthogonal Cutting Calculators

Thermal Conductivity of Work from Tool Temperature
Go Thermal Conductivity = ((Tool Temperature Constant*Specific Cutting Energy*Cutting Velocity^0.44*Cutting Area^0.22)/(Tool Temperature*Specific Heat Capacity^0.56))^(100/44)
Specific Heat of Work from Tool Temperature
Go Specific Heat Capacity = ((Tool Temperature Constant*Specific Cutting Energy*Cutting Velocity^0.44*Cutting Area^0.22)/(Tool Temperature*Thermal Conductivity^0.44))^(100/56)
Cutting Speed from Tool Temperature
Go Cutting Velocity = ((Tool Temperature*Thermal Conductivity^0.44*Specific Heat Capacity^0.56)/(Tool Temperature Constant*Specific Cutting Energy*Cutting Area^0.22))^(100/44)
Area of Cut from Tool Temperature
Go Cutting Area = ((Tool Temperature*Thermal Conductivity^0.44*Specific Heat Capacity^0.56)/(Tool Temperature Constant*Specific Cutting Energy*Cutting Velocity^0.44))^(100/22)
Specific Cutting Energy Per Unit Cutting Force from Tool Temperature
Go Specific Cutting Energy = (Tool Temperature*Specific Heat Capacity^0.56*Thermal Conductivity^0.44)/(Tool Temperature Constant*Cutting Velocity^0.44*Cutting Area^0.22)
Machining Time given Cutting Speed
Go Machining Time = (pi*Workpiece Diameter*Length Of Bar)/(Feed Rate*Cutting Velocity)
Machining Time given Spindle Speed
Go Machining Time = Length Of Bar/(Feed Rate*Spindle Speed)
Cutting Speed given Spindle Speed
Go Cutting Velocity = pi*Workpiece Diameter*Spindle Speed
Nose Radius of Tool from Surface Finish Constraint
Go Nose Radius = 0.0321/Constraint on Feed
Surface Finish Constraint
Go Constraint on Feed = 0.0321/Nose Radius

Nose Radius of Tool from Surface Finish Constraint Formula

Nose Radius = 0.0321/Constraint on Feed
rnose = 0.0321/Cs

What is Surface finish constraint?

Surface finish constraint limits the maximum feed that can be used to attain the required surface finish on the machined feature. This constraint becomes active during finish turning. The expression or CLA value of the geometric surface finish obtained during turning operation with a tool of nose radius ‘r’ is taken into account to obtain this constraint.

How to Calculate Nose Radius of Tool from Surface Finish Constraint?

Nose Radius of Tool from Surface Finish Constraint calculator uses Nose Radius = 0.0321/Constraint on Feed to calculate the Nose Radius, Nose radius of tool from surface finish constraint is defined as the radius provided at the tool tip so that it does not break due to stress concentrations. Nose Radius is denoted by rnose symbol.

How to calculate Nose Radius of Tool from Surface Finish Constraint using this online calculator? To use this online calculator for Nose Radius of Tool from Surface Finish Constraint, enter Constraint on Feed (Cs) and hit the calculate button. Here is how the Nose Radius of Tool from Surface Finish Constraint calculation can be explained with given input values -> 0.107 = 0.0321/0.3.

FAQ

What is Nose Radius of Tool from Surface Finish Constraint?
Nose radius of tool from surface finish constraint is defined as the radius provided at the tool tip so that it does not break due to stress concentrations and is represented as rnose = 0.0321/Cs or Nose Radius = 0.0321/Constraint on Feed. Constraint on Feed is the maximum feed that can be used while machining.
How to calculate Nose Radius of Tool from Surface Finish Constraint?
Nose radius of tool from surface finish constraint is defined as the radius provided at the tool tip so that it does not break due to stress concentrations is calculated using Nose Radius = 0.0321/Constraint on Feed. To calculate Nose Radius of Tool from Surface Finish Constraint, you need Constraint on Feed (Cs). With our tool, you need to enter the respective value for Constraint on Feed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!