Original reservoir area at new zero level Solution

STEP 0: Pre-Calculation Summary
Formula Used
Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed)
Ao = (Vs-Vo)/(H-ho)
This formula uses 5 Variables
Variables Used
Area at the New Zero Elevation - (Measured in Square Meter) - Area at the New Zero Elevation of the reservoir.
Volume of Sediment to be Distributed - (Measured in Cubic Meter) - Volume of Sediment to be Distributed is defined in relative with volume of sediment in reservoir and the volume of sediment filling up the conical portion of reservoir up to original filling depth.
Volume of Sediment - (Measured in Cubic Meter) - Volume of Sediment between old zero and new zero bed level.
Difference in the elevation (FRL and original bed) - (Measured in Meter) - Difference in the elevation (FRL and original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.
STEP 1: Convert Input(s) to Base Unit
Volume of Sediment to be Distributed: 455 Cubic Meter --> 455 Cubic Meter No Conversion Required
Volume of Sediment: 5 Cubic Meter --> 5 Cubic Meter No Conversion Required
Difference in the elevation (FRL and original bed): 11 Meter --> 11 Meter No Conversion Required
Height above Bed: 2 Meter --> 2 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Ao = (Vs-Vo)/(H-ho) --> (455-5)/(11-2)
Evaluating ... ...
Ao = 50
STEP 3: Convert Result to Output's Unit
50 Square Meter --> No Conversion Required
FINAL ANSWER
50 Square Meter <-- Area at the New Zero Elevation
(Calculation completed in 00.019 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

5 Area Increment Method Calculators

Sediment Volume between Old Zero and New Zero Bed Level
Go Volume of Sediment = Volume of Sediment to be Distributed-(Area at the New Zero Elevation*(Difference in the elevation (FRL and original bed)-Height above Bed))
Depth at which Reservoir is Completely filled up
Go Height above Bed = Difference in the elevation (FRL and original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation)
Original reservoir area at new zero level
Go Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed)
Sediment volume to be distributed in reservoir
Go Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the elevation (FRL and original bed)-Height above Bed)+Volume of Sediment
Incremental Sediment Volume
Go Volume of Sediment = (Area at the New Zero Elevation*Change in Head Between the Points)

Original reservoir area at new zero level Formula

Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed)
Ao = (Vs-Vo)/(H-ho)

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Original reservoir area at new zero level?

Original reservoir area at new zero level calculator uses Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed) to calculate the Area at the New Zero Elevation, The Original reservoir area at new zero level is defined as the area of reservoir under consideration after the formation of new datum line caused by the fill of sediments. Area at the New Zero Elevation is denoted by Ao symbol.

How to calculate Original reservoir area at new zero level using this online calculator? To use this online calculator for Original reservoir area at new zero level, enter Volume of Sediment to be Distributed (Vs), Volume of Sediment (Vo), Difference in the elevation (FRL and original bed) (H) & Height above Bed (ho) and hit the calculate button. Here is how the Original reservoir area at new zero level calculation can be explained with given input values -> 50 = (455-5)/(11-2).

FAQ

What is Original reservoir area at new zero level?
The Original reservoir area at new zero level is defined as the area of reservoir under consideration after the formation of new datum line caused by the fill of sediments and is represented as Ao = (Vs-Vo)/(H-ho) or Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed). Volume of Sediment to be Distributed is defined in relative with volume of sediment in reservoir and the volume of sediment filling up the conical portion of reservoir up to original filling depth, Volume of Sediment between old zero and new zero bed level, Difference in the elevation (FRL and original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL) & Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.
How to calculate Original reservoir area at new zero level?
The Original reservoir area at new zero level is defined as the area of reservoir under consideration after the formation of new datum line caused by the fill of sediments is calculated using Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the elevation (FRL and original bed)-Height above Bed). To calculate Original reservoir area at new zero level, you need Volume of Sediment to be Distributed (Vs), Volume of Sediment (Vo), Difference in the elevation (FRL and original bed) (H) & Height above Bed (ho). With our tool, you need to enter the respective value for Volume of Sediment to be Distributed, Volume of Sediment, Difference in the elevation (FRL and original bed) & Height above Bed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!