Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork Solution

STEP 0: Pre-Calculation Summary
Formula Used
Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
do = L/(2*τfork*a)+d
This formula uses 5 Variables
Variables Used
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Shear Stress in Fork of Knuckle Joint - (Measured in Pascal) - Shear Stress in Fork of Knuckle Joint is the amount of shear stress induced into the forked part of a knuckle joint and may lead to failure parallel to the force application area.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
STEP 1: Convert Input(s) to Base Unit
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Shear Stress in Fork of Knuckle Joint: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)
Thickess of Fork Eye of Knuckle Joint: 26 Millimeter --> 0.026 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
do = L/(2*τfork*a)+d --> 50000/(2*25000000*0.026)+0.037
Evaluating ... ...
do = 0.0754615384615385
STEP 3: Convert Result to Output's Unit
0.0754615384615385 Meter -->75.4615384615385 Millimeter (Check conversion here)
FINAL ANSWER
75.4615384615385 75.46154 Millimeter <-- Outer Diameter of Eye of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

11 Fork Calculators

Thickness of Fork Eye of Knuckle Joint given Bending Stress in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
Thickness of Fork Eye of Knuckle Joint given Bending Moment in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
Thickness of Fork Eye of Knuckle Joint given Rod Diameter
Go Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint
Outer Diameter of Eye of Knuckle Joint given Diameter of Pin
Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork Formula

Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
do = L/(2*τfork*a)+d

What is difference between crushing and buckling?

Crushing means breaking and failure of short column structure when subjected to high compressive stress and Buckling is failure of long column structure when subjected to high buckling stress.

How to Calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork?

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork calculator uses Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin to calculate the Outer Diameter of Eye of Knuckle Joint, The Outer diameter of eye of knuckle joint given shear stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. Outer Diameter of Eye of Knuckle Joint is denoted by do symbol.

How to calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork using this online calculator? To use this online calculator for Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork, enter Load on Knuckle Joint (L), Shear Stress in Fork of Knuckle Joint fork), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork calculation can be explained with given input values -> 75461.54 = 50000/(2*25000000*0.026)+0.037.

FAQ

What is Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork?
The Outer diameter of eye of knuckle joint given shear stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted and is represented as do = L/(2*τfork*a)+d or Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin. Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Shear Stress in Fork of Knuckle Joint is the amount of shear stress induced into the forked part of a knuckle joint and may lead to failure parallel to the force application area, Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
How to calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork?
The Outer diameter of eye of knuckle joint given shear stress in fork is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted is calculated using Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin. To calculate Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork, you need Load on Knuckle Joint (L), Shear Stress in Fork of Knuckle Joint fork), Thickess of Fork Eye of Knuckle Joint (a) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Shear Stress in Fork of Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Outer Diameter of Eye of Knuckle Joint?
In this formula, Outer Diameter of Eye of Knuckle Joint uses Load on Knuckle Joint, Shear Stress in Fork of Knuckle Joint, Thickess of Fork Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
  • Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
  • Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin
  • Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!