Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye Solution

STEP 0: Pre-Calculation Summary
Formula Used
Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
do = d+L/(b*σteye)
This formula uses 5 Variables
Variables Used
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Tensile Stress in Eye of Knuckle Joint - (Measured in Pascal) - Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension.
STEP 1: Convert Input(s) to Base Unit
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
Tensile Stress in Eye of Knuckle Joint: 45 Newton per Square Millimeter --> 45000000 Pascal (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
do = d+L/(b*σteye) --> 0.037+50000/(0.04*45000000)
Evaluating ... ...
do = 0.0647777777777778
STEP 3: Convert Result to Output's Unit
0.0647777777777778 Meter -->64.7777777777778 Millimeter (Check conversion here)
FINAL ANSWER
64.7777777777778 64.77778 Millimeter <-- Outer Diameter of Eye of Knuckle Joint
(Calculation completed in 00.004 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Ravi Khiyani
Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore
Ravi Khiyani has verified this Calculator and 300+ more calculators!

11 Fork Calculators

Thickness of Fork Eye of Knuckle Joint given Bending Stress in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork
Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye
Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
Thickness of Fork Eye of Knuckle Joint given Bending Moment in Pin
Go Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End
Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
Thickness of Fork Eye of Knuckle Joint given Rod Diameter
Go Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint
Outer Diameter of Eye of Knuckle Joint given Diameter of Pin
Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye Formula

Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)
do = d+L/(b*σteye)

Parts of the knuckle joint

A knuckle joint always has a fork end, an eye end, and a pin. Typically, these are all specially made parts although standard rod ends are sometimes used for the eye end. This has the advantage that a rod end allows some additional rotational movement perpendicular to the pin axis, providing further protection against bending stress.
Various types of pins can also be used. The most common is a special pin with a shoulder at one end and a cross hole at the other to accept a collar and split pint. For large structures, such as bridges, cold rivets were historically used. The pivot may also be bolted.

How to Calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye?

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye calculator uses Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint) to calculate the Outer Diameter of Eye of Knuckle Joint, The Outer diameter of eye of knuckle joint given tensile stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. Outer Diameter of Eye of Knuckle Joint is denoted by do symbol.

How to calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye using this online calculator? To use this online calculator for Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye, enter Diameter of Knuckle Pin (d), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Tensile Stress in Eye of Knuckle Joint teye) and hit the calculate button. Here is how the Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye calculation can be explained with given input values -> 64777.78 = 0.037+50000/(0.04*45000000).

FAQ

What is Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye?
The Outer diameter of eye of knuckle joint given tensile stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted and is represented as do = d+L/(b*σteye) or Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint). Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius & Tensile Stress in Eye of Knuckle Joint is the amount of tensile stress induced into the eye of the knuckle joint which tends to fail the eye in tension.
How to calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye?
The Outer diameter of eye of knuckle joint given tensile stress in eye is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted is calculated using Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint). To calculate Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye, you need Diameter of Knuckle Pin (d), Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Tensile Stress in Eye of Knuckle Joint teye). With our tool, you need to enter the respective value for Diameter of Knuckle Pin, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Tensile Stress in Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Outer Diameter of Eye of Knuckle Joint?
In this formula, Outer Diameter of Eye of Knuckle Joint uses Diameter of Knuckle Pin, Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Tensile Stress in Eye of Knuckle Joint. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)
  • Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin
  • Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
  • Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!