Propagation Delay without Parasitic Capacitance Solution

STEP 0: Pre-Calculation Summary
Formula Used
Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay
tc = tckt/d
This formula uses 3 Variables
Variables Used
Propagation Delay Capaitance - (Measured in Second) - Propagation Delay Capaitance is the delay of an ideal fanout-of-1 inverter with no parasitic capacitance.
Circuit Propagation Delay - (Measured in Second) - Circuit Propagation Delay refers to the rise time or fall time in logic gates. This is the time it takes for a logic gate to change its output state based on a change in the input state.
Normalized Delay - The Normalized delay is a measure used to compare the delay of a specific circuit or gate with the delay of a reference gate, often an ideal inverter.
STEP 1: Convert Input(s) to Base Unit
Circuit Propagation Delay: 8.16 Nanosecond --> 8.16E-09 Second (Check conversion here)
Normalized Delay: 221.18 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
tc = tckt/d --> 8.16E-09/221.18
Evaluating ... ...
tc = 3.68930283027398E-11
STEP 3: Convert Result to Output's Unit
3.68930283027398E-11 Second -->0.0368930283027398 Nanosecond (Check conversion here)
FINAL ANSWER
0.0368930283027398 0.036893 Nanosecond <-- Propagation Delay Capaitance
(Calculation completed in 00.004 seconds)

Credits

Created by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has created this Calculator and 900+ more calculators!
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

13 CMOS Delay Characteristics Calculators

Delay Rise
Go Delay Rise = Intrinsic Rise Delay+(Rise Resistance*Delay Capacitance)+(Slope Rise*Delay Previous)
Delay of AND-OR Gate in Gray Cell
Go Delay of AND OR Gate = (Critical Path Delay-Total Propagation Delay-XOR Gate Delay)/(Gates on Critical Path-1)
Delay of 1-Bit Propagate Gates
Go Total Propagation Delay = Critical Path Delay-((Gates on Critical Path-1)*Delay of AND OR Gate+XOR Gate Delay)
Propagation Delay in Circuit
Go Circuit Propagation Delay = (Propagation Delay High to Low+Propagation Delay Low to High)/2
Propagation Delay without Parasitic Capacitance
Go Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay
Propagation Delay
Go Total Propagation Delay = Normalized Delay*Propagation Delay Capaitance
Normalized Delay
Go Normalized Delay = Total Propagation Delay/Propagation Delay Capaitance
Voltage-Controlled Delay Line
Go Voltage-Controlled Delay Line = Small Deviation Delay/VCDL Gain
Small Deviation Delay
Go Small Deviation Delay = VCDL Gain*Voltage-Controlled Delay Line
VCDL Gain
Go VCDL Gain = Small Deviation Delay/Voltage-Controlled Delay Line
Edge Rate
Go Edge Rate = (Rise Time+Fall Time)/2
Fall Time
Go Fall Time = 2*Edge Rate-Rise Time
Rise Time
Go Rise Time = 2*Edge Rate-Fall Time

Propagation Delay without Parasitic Capacitance Formula

Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay
tc = tckt/d

Explain sizing of the inverter?

In order to drive the desired load capacitance we have to increase the size (width) of the inverters to get an optimized performance.

How to Calculate Propagation Delay without Parasitic Capacitance?

Propagation Delay without Parasitic Capacitance calculator uses Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay to calculate the Propagation Delay Capaitance, Propagation Delay without Parasitic Capacitance formula is defined as the delay of an ideal fanout-of-1 inverter with no parasitic capacitance. Propagation Delay Capaitance is denoted by tc symbol.

How to calculate Propagation Delay without Parasitic Capacitance using this online calculator? To use this online calculator for Propagation Delay without Parasitic Capacitance, enter Circuit Propagation Delay (tckt) & Normalized Delay (d) and hit the calculate button. Here is how the Propagation Delay without Parasitic Capacitance calculation can be explained with given input values -> 3.2E+8 = 8.16E-09/221.18.

FAQ

What is Propagation Delay without Parasitic Capacitance?
Propagation Delay without Parasitic Capacitance formula is defined as the delay of an ideal fanout-of-1 inverter with no parasitic capacitance and is represented as tc = tckt/d or Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay. Circuit Propagation Delay refers to the rise time or fall time in logic gates. This is the time it takes for a logic gate to change its output state based on a change in the input state & The Normalized delay is a measure used to compare the delay of a specific circuit or gate with the delay of a reference gate, often an ideal inverter.
How to calculate Propagation Delay without Parasitic Capacitance?
Propagation Delay without Parasitic Capacitance formula is defined as the delay of an ideal fanout-of-1 inverter with no parasitic capacitance is calculated using Propagation Delay Capaitance = Circuit Propagation Delay/Normalized Delay. To calculate Propagation Delay without Parasitic Capacitance, you need Circuit Propagation Delay (tckt) & Normalized Delay (d). With our tool, you need to enter the respective value for Circuit Propagation Delay & Normalized Delay and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!