Positive Moment for Interior Spans Solution

STEP 0: Pre-Calculation Summary
Formula Used
Moment in Structures = (Vertical Load*Length of Span^2)/16
Mt = (Wload*In^2)/16
This formula uses 3 Variables
Variables Used
Moment in Structures - (Measured in Joule) - The Moment in Structures is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
Vertical Load - (Measured in Kilonewton) - Vertical Load are applied perpendicular to the surface.
Length of Span - (Measured in Meter) - Length of Span refers to the length of the opening above which the beam is spanning.
STEP 1: Convert Input(s) to Base Unit
Vertical Load: 3.6 Kilonewton --> 3.6 Kilonewton No Conversion Required
Length of Span: 10.01 Meter --> 10.01 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Mt = (Wload*In^2)/16 --> (3.6*10.01^2)/16
Evaluating ... ...
Mt = 22.5450225
STEP 3: Convert Result to Output's Unit
22.5450225 Joule -->22.5450225 Newton Meter (Check conversion here)
FINAL ANSWER
22.5450225 22.54502 Newton Meter <-- Moment in Structures
(Calculation completed in 00.004 seconds)

Credits

Created by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 1000+ more calculators!
Verified by Rushi Shah
K J Somaiya College of Engineering (K J Somaiya), Mumbai
Rushi Shah has verified this Calculator and 200+ more calculators!

10+ Use of Moment Coefficients Calculators

Shear Force in End Members at First Interior Support
Go Moment in Structures = 1.15*(Vertical Load*Length of Span^2)/2
Negative Moment at Interior Faces of Exterior Supports where Support is Spandrel Beam
Go Moment in Structures = (Vertical Load*Length of Span^2)/24
Negative Moment at Exterior Face of First Interior Support for More than Two Spans
Go Moment in Structures = (Vertical Load*Length of Span^2)/10
Negative Moment at Interior Faces of Exterior Support where Support is Column
Go Moment in Structures = (Vertical Load*Length of Span^2)/12
Positive Moment for End Spans if Discontinuous End is Integral with Support
Go Moment in Structures = (Vertical Load*Length of Span^2)/14
Positive Moment for End Spans if Discontinuous End is Unrestrained
Go Moment in Structures = (Vertical Load*Length of Span^2)/11
Negative Moment at Other Faces of Interior Supports
Go Moment in Structures = (Vertical Load*Length of Span^2)/11
Positive Moment for Interior Spans
Go Moment in Structures = (Vertical Load*Length of Span^2)/16
Negative Moment at Exterior Face of First Interior Support for Two Spans
Go Moment in Structures = (Vertical Load*Length of Span^2)/9
Shear Force at All Other Supports
Go Moment in Structures = (Vertical Load*Length of Span^2)/2

Positive Moment for Interior Spans Formula

Moment in Structures = (Vertical Load*Length of Span^2)/16
Mt = (Wload*In^2)/16

Define Moment

The Moment of a force is a measure of its tendency to cause a body to rotate about a specific point or axis. This is different from the tendency for a body to move, or translate, in the direction of the force.

How to Calculate Positive Moment for Interior Spans?

Positive Moment for Interior Spans calculator uses Moment in Structures = (Vertical Load*Length of Span^2)/16 to calculate the Moment in Structures, The Positive Moment for Interior Spans is defined as the beam/slab is being forced to curve downwards or Sag (forming a smile) in the mid span. Moment in Structures is denoted by Mt symbol.

How to calculate Positive Moment for Interior Spans using this online calculator? To use this online calculator for Positive Moment for Interior Spans, enter Vertical Load (Wload) & Length of Span (In) and hit the calculate button. Here is how the Positive Moment for Interior Spans calculation can be explained with given input values -> 0.0225 = (3600*0.01001^2)/16.

FAQ

What is Positive Moment for Interior Spans?
The Positive Moment for Interior Spans is defined as the beam/slab is being forced to curve downwards or Sag (forming a smile) in the mid span and is represented as Mt = (Wload*In^2)/16 or Moment in Structures = (Vertical Load*Length of Span^2)/16. Vertical Load are applied perpendicular to the surface & Length of Span refers to the length of the opening above which the beam is spanning.
How to calculate Positive Moment for Interior Spans?
The Positive Moment for Interior Spans is defined as the beam/slab is being forced to curve downwards or Sag (forming a smile) in the mid span is calculated using Moment in Structures = (Vertical Load*Length of Span^2)/16. To calculate Positive Moment for Interior Spans, you need Vertical Load (Wload) & Length of Span (In). With our tool, you need to enter the respective value for Vertical Load & Length of Span and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Moment in Structures?
In this formula, Moment in Structures uses Vertical Load & Length of Span. We can use 9 other way(s) to calculate the same, which is/are as follows -
  • Moment in Structures = (Vertical Load*Length of Span^2)/11
  • Moment in Structures = (Vertical Load*Length of Span^2)/14
  • Moment in Structures = (Vertical Load*Length of Span^2)/9
  • Moment in Structures = (Vertical Load*Length of Span^2)/10
  • Moment in Structures = (Vertical Load*Length of Span^2)/11
  • Moment in Structures = (Vertical Load*Length of Span^2)/24
  • Moment in Structures = (Vertical Load*Length of Span^2)/12
  • Moment in Structures = (Vertical Load*Length of Span^2)/2
  • Moment in Structures = 1.15*(Vertical Load*Length of Span^2)/2
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!