Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield Solution

STEP 0: Pre-Calculation Summary
Formula Used
Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
R = (2*h*A)-DG
This formula uses 4 Variables
Variables Used
Possible Recharge - (Measured in Cubic Meter per Second) - Possible Recharge is defined as the gross recharge minus the natural recharge of the area.
Water Level Fluctuation - (Measured in Meter) - Water Level Fluctuation during monsoon season is an irregular rising and falling in number or amount of water.
Watershed Area - (Measured in Square Meter) - Watershed Area is an isolated area with a well demarcated boundary line, draining the rainwater to a single outlet.
Gross Water Draft - (Measured in Cubic Meter per Second) - Gross Water Draft due to Rainfall and other sources.
STEP 1: Convert Input(s) to Base Unit
Water Level Fluctuation: 5 Meter --> 5 Meter No Conversion Required
Watershed Area: 20 Square Meter --> 20 Square Meter No Conversion Required
Gross Water Draft: 10 Cubic Meter per Second --> 10 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
R = (2*h*A)-DG --> (2*5*20)-10
Evaluating ... ...
R = 190
STEP 3: Convert Result to Output's Unit
190 Cubic Meter per Second --> No Conversion Required
FINAL ANSWER
190 Cubic Meter per Second <-- Possible Recharge
(Calculation completed in 00.004 seconds)

Credits

Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

13 Maximum Value of Specific Yield for Various Hydrogeologic Conditions based on Norms Calculators

Possible Recharge in Hard Rock Areas with Massive, Poorly Fractured Rock for Maximum Specific Yield
Go Possible Recharge = (0.5*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Karstified Limestone for Maximum Specific Yield
Go Possible Recharge = (15*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Sandy Alluvial Areas for Maximum Value of Specific Yield
Go Possible Recharge = (20*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Silty Alluvial Areas for Maximum Value of Specific Yield
Go Possible Recharge = (12*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Low Clay Content for Maximum Value of Specific Yield
Go Possible Recharge = (4*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Significant Clay Content for Maximum Specific Yield
Go Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Weathered Jointed Basalt for Maximum Specific Yield
Go Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield
Go Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Clayey Alluvial Areas for Maximum Value of Specific Yield
Go Possible Recharge = (8*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Sandstone for Maximum Specific Yield
Go Possible Recharge = (5*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Quartzite for Maximum Specific Yield
Go Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Limestone for Maximum Specific Yield
Go Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Possible Recharge in Hard Rock Areas with Laterite for Maximum Specific Yield
Go Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft

Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield Formula

Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
R = (2*h*A)-DG

What is Recharge in Hydrology?

Groundwater Recharge or deep drainage or deep percolation is a hydrologic process, where water moves downward from surface water to groundwater. Recharge is the primary method through which water enters an aquifer.

How to Calculate Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield?

Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield calculator uses Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft to calculate the Possible Recharge, The Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield is defined for the specific region of consideration based on the value of recommended norms for specific yield in percentage. Possible Recharge is denoted by R symbol.

How to calculate Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield using this online calculator? To use this online calculator for Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield, enter Water Level Fluctuation (h), Watershed Area (A) & Gross Water Draft (DG) and hit the calculate button. Here is how the Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield calculation can be explained with given input values -> 190 = (2*5*20)-10.

FAQ

What is Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield?
The Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield is defined for the specific region of consideration based on the value of recommended norms for specific yield in percentage and is represented as R = (2*h*A)-DG or Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft. Water Level Fluctuation during monsoon season is an irregular rising and falling in number or amount of water, Watershed Area is an isolated area with a well demarcated boundary line, draining the rainwater to a single outlet & Gross Water Draft due to Rainfall and other sources.
How to calculate Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield?
The Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield is defined for the specific region of consideration based on the value of recommended norms for specific yield in percentage is calculated using Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft. To calculate Possible Recharge in Hard Rock Areas with Phyllites, Shales for Maximum Specific Yield, you need Water Level Fluctuation (h), Watershed Area (A) & Gross Water Draft (DG). With our tool, you need to enter the respective value for Water Level Fluctuation, Watershed Area & Gross Water Draft and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Possible Recharge?
In this formula, Possible Recharge uses Water Level Fluctuation, Watershed Area & Gross Water Draft. We can use 12 other way(s) to calculate the same, which is/are as follows -
  • Possible Recharge = (20*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (12*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (8*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (4*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (5*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (2*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (3*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (15*Water Level Fluctuation*Watershed Area)-Gross Water Draft
  • Possible Recharge = (0.5*Water Level Fluctuation*Watershed Area)-Gross Water Draft
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!