Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2))
P = sqrt(Ploss*V*(Vm*cos(Φ))^2/(2.5*ρ*(L)^2))
This formula uses 2 Functions, 7 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead AC line when in use.
Volume of Conductor - (Measured in Cubic Meter) - Volume of Conductor is the total volume of the material used to make the conductor of an overhead ac line.
Maximum Voltage Overhead AC - (Measured in Volt) - Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Length of Overhead AC Wire - (Measured in Meter) - Length of Overhead AC Wire is the total length of the wire from one end to other end.
STEP 1: Convert Input(s) to Base Unit
Line Losses: 8.23 Watt --> 8.23 Watt No Conversion Required
Volume of Conductor: 26 Cubic Meter --> 26 Cubic Meter No Conversion Required
Maximum Voltage Overhead AC: 62 Volt --> 62 Volt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Resistivity: 1.7E-05 Ohm Meter --> 1.7E-05 Ohm Meter No Conversion Required
Length of Overhead AC Wire: 10.63 Meter --> 10.63 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = sqrt(Ploss*V*(Vm*cos(Φ))^2/(2.5*ρ*(L)^2)) --> sqrt(8.23*26*(62*cos(0.5235987755982))^2/(2.5*1.7E-05*(10.63)^2))
Evaluating ... ...
P = 11333.9471509049
STEP 3: Convert Result to Output's Unit
11333.9471509049 Watt --> No Conversion Required
FINAL ANSWER
11333.9471509049 11333.95 Watt <-- Power Transmitted
(Calculation completed in 00.020 seconds)

Credits

Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

8 Power & Power Factor Calculators

Power Transmitted using Area of X-Section(Single-Phase Three-Wire OS)
Go Power Transmitted = sqrt((Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*Line Losses*((cos(Phase Difference))^2))/(Resistivity*Length of Overhead AC Wire))
Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS)
Go Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2))
Power Transmitted using Line Losses (Single-Phase Three-Wire OS)
Go Power Transmitted = sqrt(Line Losses*Area of Overhead AC Wire*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(Resistivity*Length of Overhead AC Wire))
Power Factor using Area of X-Section(Single-Phase Three-Wire OS)
Go Power Factor = sqrt((Power Transmitted^2)*Resistivity*Length of Overhead AC Wire/(Area of Overhead AC Wire*Line Losses*(Maximum Voltage Overhead AC^2)))
Power Factor using Line Losses (Single-Phase Three-Wire OS)
Go Power Factor = (Power Transmitted/Maximum Voltage Overhead AC)*sqrt(Resistivity*Length of Overhead AC Wire)/(Line Losses*Area of Overhead AC Wire)
Power Factor using Load Current (Single-Phase Three-Wire OS)
Go Power Factor = Power Transmitted/(sqrt(Phase Difference)*Maximum Voltage Overhead AC*Current Overhead AC)
Power Transmitted using Load Current (Single-Phase Three-Wire OS)
Go Power Transmitted = Current Overhead AC*Maximum Voltage Overhead AC*cos(Phase Difference)*sqrt(2)
Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)
Go Power Factor = sqrt((0.625)*Constant Overhead AC/Volume of Conductor)

Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS) Formula

Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2))
P = sqrt(Ploss*V*(Vm*cos(Φ))^2/(2.5*ρ*(L)^2))

What is the value of maximum voltage and volume of conductor material in 1-phase 3-wire system?

The volume of conductor material required in this system is 5/8cos2θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is 2vm so that r.m.s. value of voltage between them is √6vm.

How to Calculate Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS)?

Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS) calculator uses Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2)) to calculate the Power Transmitted, The Power Transmitted using Volume of Conductor Material (single-phase three-wire OS) formula is defined as the bulk movement of electrical energy from a generating site, such as a power station or power plant, to an electrical substation where voltage is transformed and distributed to consumers or other substations. Power Transmitted is denoted by P symbol.

How to calculate Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS) using this online calculator? To use this online calculator for Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS), enter Line Losses (Ploss), Volume of Conductor (V), Maximum Voltage Overhead AC (Vm), Phase Difference (Φ), Resistivity (ρ) & Length of Overhead AC Wire (L) and hit the calculate button. Here is how the Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS) calculation can be explained with given input values -> 11333.95 = sqrt(8.23*26*(62*cos(0.5235987755982))^2/(2.5*1.7E-05*(10.63)^2)).

FAQ

What is Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS)?
The Power Transmitted using Volume of Conductor Material (single-phase three-wire OS) formula is defined as the bulk movement of electrical energy from a generating site, such as a power station or power plant, to an electrical substation where voltage is transformed and distributed to consumers or other substations and is represented as P = sqrt(Ploss*V*(Vm*cos(Φ))^2/(2.5*ρ*(L)^2)) or Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2)). Line Losses is defined as the total losses occurring in an Overhead AC line when in use, Volume of Conductor is the total volume of the material used to make the conductor of an overhead ac line, Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit, Resistivity is the measure of how strongly a material opposes the flow of current through them & Length of Overhead AC Wire is the total length of the wire from one end to other end.
How to calculate Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS)?
The Power Transmitted using Volume of Conductor Material (single-phase three-wire OS) formula is defined as the bulk movement of electrical energy from a generating site, such as a power station or power plant, to an electrical substation where voltage is transformed and distributed to consumers or other substations is calculated using Power Transmitted = sqrt(Line Losses*Volume of Conductor*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(2.5*Resistivity*(Length of Overhead AC Wire)^2)). To calculate Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS), you need Line Losses (Ploss), Volume of Conductor (V), Maximum Voltage Overhead AC (Vm), Phase Difference (Φ), Resistivity (ρ) & Length of Overhead AC Wire (L). With our tool, you need to enter the respective value for Line Losses, Volume of Conductor, Maximum Voltage Overhead AC, Phase Difference, Resistivity & Length of Overhead AC Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Power Transmitted?
In this formula, Power Transmitted uses Line Losses, Volume of Conductor, Maximum Voltage Overhead AC, Phase Difference, Resistivity & Length of Overhead AC Wire. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Power Transmitted = sqrt((Area of Overhead AC Wire*(Maximum Voltage Overhead AC^2)*Line Losses*((cos(Phase Difference))^2))/(Resistivity*Length of Overhead AC Wire))
  • Power Transmitted = Current Overhead AC*Maximum Voltage Overhead AC*cos(Phase Difference)*sqrt(2)
  • Power Transmitted = sqrt(Line Losses*Area of Overhead AC Wire*(Maximum Voltage Overhead AC*cos(Phase Difference))^2/(Resistivity*Length of Overhead AC Wire))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!