Pressure Coefficient Combined with Blast Wave for Shuttle Solution

STEP 0: Pre-Calculation Summary
Formula Used
Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle)
Cp = 0.0137/(xd/l)
This formula uses 3 Variables
Variables Used
Pressure Coefficient - Pressure coefficient defines the value of local pressure at a point in terms of free stream pressure and dynamic pressure.
Distance from Nose Tip to Required Base Diameter - (Measured in Meter) - Distance from Nose Tip to Required Base Diameter, used for studying the leading edge of the hypersonic vehicles.
Length of Shuttle - (Measured in Meter) - Length of Shuttle variable is used for studying the coefficient of pressure.
STEP 1: Convert Input(s) to Base Unit
Distance from Nose Tip to Required Base Diameter: 1.2 Meter --> 1.2 Meter No Conversion Required
Length of Shuttle: 500 Millimeter --> 0.5 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Cp = 0.0137/(xd/l) --> 0.0137/(1.2/0.5)
Evaluating ... ...
Cp = 0.00570833333333333
STEP 3: Convert Result to Output's Unit
0.00570833333333333 --> No Conversion Required
FINAL ANSWER
0.00570833333333333 0.005708 <-- Pressure Coefficient
(Calculation completed in 00.020 seconds)

Credits

Created by Sanjay Krishna
Amrita School of Engineering (ASE), Vallikavu
Sanjay Krishna has created this Calculator and 300+ more calculators!
Verified by Shikha Maurya
Indian Institute of Technology (IIT), Bombay
Shikha Maurya has verified this Calculator and 200+ more calculators!

6 Blast Wave Part Theory Calculators

Pressure Coefficient Combined with Blast Wave for Shuttle at Angle of Attack
Go Pressure Coefficient = 0.0137/(Distance from X-Axis/Length of Shuttle)+2*(sin(Angle of Attack))^2
Pressure Coefficient for Blunt-Nosed Cylinder
Go Pressure Coefficient = 0.096*(Drag Coefficient^(1/2))/(Distance from Nose Tip to Required Base Diameter/Diameter)
Pressure Coefficient for Blunt-Nosed Plate
Go Pressure Coefficient = 0.173*(Drag Coefficient^(2/3))/((Distance from Y-Axis/Diameter 1)^(2/3))
Pressure Coefficient for Blast Wave Theory
Go Pressure Coefficient = 2/(Specific Heat Ratio*Mach Number^2)*(Pressure Ratio-1)
Pressure Coefficient for Blast Wave Theory at Very High Values of Mach
Go Pressure Coefficient = 2/(Specific Heat Ratio*Mach Number^2)*Pressure Ratio
Pressure Coefficient Combined with Blast Wave for Shuttle
Go Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle)

Pressure Coefficient Combined with Blast Wave for Shuttle Formula

Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle)
Cp = 0.0137/(xd/l)

What is pressure coefficient?

The pressure coefficient is a dimensionless number which describes the relative pressures throughout a flow field in fluid dynamics.

How to Calculate Pressure Coefficient Combined with Blast Wave for Shuttle?

Pressure Coefficient Combined with Blast Wave for Shuttle calculator uses Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle) to calculate the Pressure Coefficient, The Pressure coefficient combined with blast wave for shuttle formula is defined as the inverse of the ratio of the distance from the tip of shuttle to the length of the shuttle. Pressure Coefficient is denoted by Cp symbol.

How to calculate Pressure Coefficient Combined with Blast Wave for Shuttle using this online calculator? To use this online calculator for Pressure Coefficient Combined with Blast Wave for Shuttle, enter Distance from Nose Tip to Required Base Diameter (xd) & Length of Shuttle (l) and hit the calculate button. Here is how the Pressure Coefficient Combined with Blast Wave for Shuttle calculation can be explained with given input values -> 0.835366 = 0.0137/(1.2/0.5).

FAQ

What is Pressure Coefficient Combined with Blast Wave for Shuttle?
The Pressure coefficient combined with blast wave for shuttle formula is defined as the inverse of the ratio of the distance from the tip of shuttle to the length of the shuttle and is represented as Cp = 0.0137/(xd/l) or Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle). Distance from Nose Tip to Required Base Diameter, used for studying the leading edge of the hypersonic vehicles & Length of Shuttle variable is used for studying the coefficient of pressure.
How to calculate Pressure Coefficient Combined with Blast Wave for Shuttle?
The Pressure coefficient combined with blast wave for shuttle formula is defined as the inverse of the ratio of the distance from the tip of shuttle to the length of the shuttle is calculated using Pressure Coefficient = 0.0137/(Distance from Nose Tip to Required Base Diameter/Length of Shuttle). To calculate Pressure Coefficient Combined with Blast Wave for Shuttle, you need Distance from Nose Tip to Required Base Diameter (xd) & Length of Shuttle (l). With our tool, you need to enter the respective value for Distance from Nose Tip to Required Base Diameter & Length of Shuttle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Pressure Coefficient?
In this formula, Pressure Coefficient uses Distance from Nose Tip to Required Base Diameter & Length of Shuttle. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Pressure Coefficient = 0.0137/(Distance from X-Axis/Length of Shuttle)+2*(sin(Angle of Attack))^2
  • Pressure Coefficient = 0.173*(Drag Coefficient^(2/3))/((Distance from Y-Axis/Diameter 1)^(2/3))
  • Pressure Coefficient = 0.096*(Drag Coefficient^(1/2))/(Distance from Nose Tip to Required Base Diameter/Diameter)
  • Pressure Coefficient = 2/(Specific Heat Ratio*Mach Number^2)*(Pressure Ratio-1)
  • Pressure Coefficient = 2/(Specific Heat Ratio*Mach Number^2)*Pressure Ratio
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!