Pressure Intensity inside Liquid Jet Solution

STEP 0: Pre-Calculation Summary
Formula Used
Internal Pressure Intensity = Surface Tension/Radius of Tube
pi = σ/rt
This formula uses 3 Variables
Variables Used
Internal Pressure Intensity - (Measured in Pascal) - Internal Pressure Intensity is the pressure exerted by a liquid to the internal walls of the substance.
Surface Tension - (Measured in Newton per Meter) - Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side.
Radius of Tube - (Measured in Meter) - Radius of Tube is defined as the distance from longitudinal axis of tube to the periphery perpendicularly.
STEP 1: Convert Input(s) to Base Unit
Surface Tension: 72.75 Newton per Meter --> 72.75 Newton per Meter No Conversion Required
Radius of Tube: 5.1 Meter --> 5.1 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
pi = σ/rt --> 72.75/5.1
Evaluating ... ...
pi = 14.2647058823529
STEP 3: Convert Result to Output's Unit
14.2647058823529 Pascal -->14.2647058823529 Newton per Square Meter (Check conversion here)
FINAL ANSWER
14.2647058823529 14.26471 Newton per Square Meter <-- Internal Pressure Intensity
(Calculation completed in 00.004 seconds)

Credits

Created by Alithea Fernandes
Don Bosco College of Engineering (DBCE), Goa
Alithea Fernandes has created this Calculator and 100+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

25 Properties of Fluid Calculators

Capillary Rise or Depression when Tube is inserted in two Liquids
Go Capillary Rise (or Depression) = (2*Surface Tension*cos(Contact Angle))/(Radius of Tube*Specific Weight of Water in KN per cubic meter*(Specific Gravity of Liquid 1-Specific Gravity of Liquid 2)*1000)
Capillary Rise or Depression when two Vertical Parallel Plates are Partially Immersed in Liquid
Go Capillary Rise (or Depression) = (2*Surface Tension*(cos(Contact Angle)))/(Specific Weight of Water in KN per cubic meter*Specific Gravity of Fluid*Distance between Vertical Plates)
Capillary Rise or Depression of Fluid
Go Capillary Rise (or Depression) = (2*Surface Tension*cos(Contact Angle))/(Specific Gravity of Fluid*Radius of Tube*Specific Weight of Water in KN per cubic meter*1000)
Capillary Rise when Contact is between Water and Glass
Go Capillary Rise (or Depression) = (2*Surface Tension)/(Radius of Tube*Specific Weight of Water in KN per cubic meter*1000)
Absolute Pressure using Equation of State given Specific Weight
Go Absolute Pressure by Specific Weight = Gas Constant*Specific Weight of Liquid in Piezometer*Absolute Temperature of Gas
Gas Constant using Equation of State
Go Gas Constant = Absolute Pressure by Gas Density/(Density of Gas*Absolute Temperature of Gas)
Absolute Temperature of Gas
Go Absolute Temperature of Gas = Absolute Pressure by Gas Density/(Gas Constant*Density of Gas)
Absolute Pressure using Gas Density
Go Absolute Pressure by Gas Density = Absolute Temperature of Gas*Density of Gas*Gas Constant
Bulk Modulus of Elasticity
Go Bulk Modulus of Elasticity = (Change in Pressure/(Change in Volume/Fluid Volume))
Velocity of Fluid given Shear Stress
Go Fluid Velocity = (Distance between Fluid Layers*Shear Stress)/Dynamic Viscosity
Compressibility of Fluid
Go Compressibility of Fluid = ((Change in Volume/Fluid Volume)/Change in Pressure)
Specific Gravity of Fluid
Go Specific Gravity of Fluid = Specific Weight of Liquid in Piezometer/Specific Weight of Standard Fluid
Mass Density given Specific Weight
Go Mass Density of Fluid = Specific Weight of Liquid in Piezometer/Acceleration due to Gravity
Volume of Fluid given Specific Weight
Go Volume = Weight of Liquid/Specific Weight of Liquid in Piezometer
Pressure Intensity inside Soap Bubble
Go Internal Pressure Intensity = (4*Surface Tension)/Radius of Tube
Pressure Intensity inside Droplet
Go Internal Pressure Intensity = (2*Surface Tension)/Radius of Tube
Dynamic Viscosity using Kinematic Viscosity
Go Dynamic Viscosity = Mass Density of Fluid*Kinematic Viscosity
Mass Density given Viscosity
Go Mass Density of Fluid = Dynamic Viscosity/Kinematic Viscosity
Pressure Intensity inside Liquid Jet
Go Internal Pressure Intensity = Surface Tension/Radius of Tube
Velocity Gradient
Go Velocity Gradient = Change in Velocity/Change in Distance
Shear Stress between any two thin sheets of Fluid
Go Shear Stress = Velocity Gradient*Dynamic Viscosity
Velocity Gradient given Shear Stress
Go Velocity Gradient = Shear Stress/Dynamic Viscosity
Dynamic Viscosity given Shear Stress
Go Dynamic Viscosity = Shear Stress/Velocity Gradient
Compressibility of Fluid given Bulk Modulus of Elasticity
Go Compressibility of Fluid = 1/Bulk Modulus of Elasticity
Specific Volume of Fluid
Go Specific Volume = 1/Mass Density of Fluid

Pressure Intensity inside Liquid Jet Formula

Internal Pressure Intensity = Surface Tension/Radius of Tube
pi = σ/rt

What is Surface Tension?

The property of the surface of a liquid that allows it to resist an external force, due to the cohesive nature of its molecules. The cohesive forces between liquid molecules are responsible for the phenomenon known as surface tension.

How to Calculate Pressure Intensity inside Liquid Jet?

Pressure Intensity inside Liquid Jet calculator uses Internal Pressure Intensity = Surface Tension/Radius of Tube to calculate the Internal Pressure Intensity, The Pressure Intensity inside liquid Jet formula is defined as a function of surface tension and the radius of the liquid jet. Internal Pressure Intensity is denoted by pi symbol.

How to calculate Pressure Intensity inside Liquid Jet using this online calculator? To use this online calculator for Pressure Intensity inside Liquid Jet, enter Surface Tension (σ) & Radius of Tube (rt) and hit the calculate button. Here is how the Pressure Intensity inside Liquid Jet calculation can be explained with given input values -> 14.26471 = 72.75/5.1.

FAQ

What is Pressure Intensity inside Liquid Jet?
The Pressure Intensity inside liquid Jet formula is defined as a function of surface tension and the radius of the liquid jet and is represented as pi = σ/rt or Internal Pressure Intensity = Surface Tension/Radius of Tube. Surface Tension is a word that is linked to the liquid surface. It is a physical property of liquids, in which the molecules are drawn onto every side & Radius of Tube is defined as the distance from longitudinal axis of tube to the periphery perpendicularly.
How to calculate Pressure Intensity inside Liquid Jet?
The Pressure Intensity inside liquid Jet formula is defined as a function of surface tension and the radius of the liquid jet is calculated using Internal Pressure Intensity = Surface Tension/Radius of Tube. To calculate Pressure Intensity inside Liquid Jet, you need Surface Tension (σ) & Radius of Tube (rt). With our tool, you need to enter the respective value for Surface Tension & Radius of Tube and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Internal Pressure Intensity?
In this formula, Internal Pressure Intensity uses Surface Tension & Radius of Tube. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Internal Pressure Intensity = (2*Surface Tension)/Radius of Tube
  • Internal Pressure Intensity = (4*Surface Tension)/Radius of Tube
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!